期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
钻头圆锥钻齿切削岩石数值模拟以及一种新的解析估算模型 被引量:2
1
作者 刘宏亮 尹莉 +1 位作者 付玲 王霄腾 《中国工程机械学报》 北大核心 2021年第1期38-43,共6页
旋挖钻钻头圆锥形钻齿切削岩石破碎机理研究,能为旋挖钻钻头结构优化设计与钻进效率提升提供相关技术支持。基于修正的Drucker-Prager塑性模型,建立了圆锥钻齿切削岩石的数值仿真模型,并测试了抗拉强度、抗压强度两种准则计算结果的差... 旋挖钻钻头圆锥形钻齿切削岩石破碎机理研究,能为旋挖钻钻头结构优化设计与钻进效率提升提供相关技术支持。基于修正的Drucker-Prager塑性模型,建立了圆锥钻齿切削岩石的数值仿真模型,并测试了抗拉强度、抗压强度两种准则计算结果的差异和岩石剪胀角对数值仿真计算的影响。同时,结合岩石抗压强度、内聚力以及摩擦角,给出了一种新的圆锥钻齿切削作用力的解析求解模型。将某砂岩切削试验的测试数据对比,验证了相关计算。从对比结果可知:以抗拉强度准则进行数值模拟所得的钻齿切削作用力小于试验测试值,误差较大;但以抗压强度准则进行计算的结果更接近实验测试数据。同时,所建立的解析估算模型有较好的计算精度,解析估算值与实验值误差的绝对值控制在30%以内。 展开更多
关键词 圆锥形钻齿 岩石切削 DRUCKER-PRAGER模型 数值仿真 解析估算
下载PDF
土质地基道路引起既有隧道变形的解析估算法探索
2
作者 莫阳 《城市道桥与防洪》 2016年第12期148-152,共5页
城市地铁迅猛发展引发道路建设期及运营期对既有地铁隧道的保护问题,以提供简便实用的方法对道路施工影响既有隧道进行分析为目的,基于等效原理和连续性原理并运用弹性力学和土力学理论,确定隧道变形与周围土体变形之间的关系,建立附加... 城市地铁迅猛发展引发道路建设期及运营期对既有地铁隧道的保护问题,以提供简便实用的方法对道路施工影响既有隧道进行分析为目的,基于等效原理和连续性原理并运用弹性力学和土力学理论,确定隧道变形与周围土体变形之间的关系,建立附加荷载作用下土质地基中隧道变形的解析算法,导出道路施工对隧道变形影响程度的验算判别式。 展开更多
关键词 道路工程 解析估算 隧道变形 土质地基
下载PDF
混凝土宏观力学参数估算研究现状及发展趋势
3
作者 夏晓舟 章青 +1 位作者 刘光焰 汤书军 《河海大学学报(自然科学版)》 CAS CSCD 北大核心 2007年第4期438-443,共6页
综述了混凝土类材料宏观力学参数估算中细观夹杂理论的解析方法和细观数值试验的数值方法的研究现状,重点介绍了界面连接完好的混凝土类材料有效模量估算的一些分析方法,并对细观夹杂理论和细观数值试验方法的发展趋势进行了展望,认为... 综述了混凝土类材料宏观力学参数估算中细观夹杂理论的解析方法和细观数值试验的数值方法的研究现状,重点介绍了界面连接完好的混凝土类材料有效模量估算的一些分析方法,并对细观夹杂理论和细观数值试验方法的发展趋势进行了展望,认为今后的研究热点将是针对混凝土中界面连接不完好和基体材料非线性这两个根本特征下的有效强度估算以及体现混凝土细观特征的宏观本构关系的建立. 展开更多
关键词 混凝土 宏观力学参数 细观夹杂理论 细观数值试验 解析估算 数值估算
下载PDF
高速广域网的并行通信
4
作者 李斌 《管理观察》 1996年第4期50-50,共1页
关键词 高速广域网 并行通信 网络布局 敏感度指标 随机模型 网络设计 定量评估 通过能力 解析估算 随机曲线
下载PDF
Source apportionment and secondary organic aerosol estimation of PM_(2.5) in an urban atmosphere in China 被引量:31
5
作者 HUANG XiaoFeng YUN Hui +4 位作者 GONG ZhaoHeng LI Xiang HE LingYan ZHANG YuanHang HU Min 《Science China Earth Sciences》 SCIE EI CAS 2014年第6期1352-1362,共11页
PM2.5 is the key pollutant in atmospheric pollution in China.With new national air quality standards taking effect,PM2.5 has become a major issue for future pollution control.To effectively prevent and control PM2.5,i... PM2.5 is the key pollutant in atmospheric pollution in China.With new national air quality standards taking effect,PM2.5 has become a major issue for future pollution control.To effectively prevent and control PM2.5,its emission sources must be precisely and thoroughly understood.However,there are few publications reporting comprehensive and systematic results of PM2.5 source apportionment in the country.Based on PM2.5 sampling during 2009 in Shenzhen and follow-up investigation,positive matrix factorization(PMF)analysis has been carried out to understand the major sources and their temporal and spatial variations.The results show that in urban Shenzhen(University Town site),annual mean PM2.5 concentration was 42.2μg m?3,with secondary sulfate,vehicular emission,biomass burning and secondary nitrate as major sources;these contributed30.0%,26.9%,9.8%and 9.3%to total PM2.5,respectively.Other sources included high chloride,heavy oil combustion,sea salt,dust and the metallurgical industry,with contributions between 2%–4%.Spatiotemporal variations of various sources show that vehicular emission was mainly a local source,whereas secondary sulfate and biomass burning were mostly regional.Secondary nitrate had both local and regional sources.Identification of secondary organic aerosol(SOA)has always been difficult in aerosol source apportionment.In this study,the PMF model and organic carbon/elemental carbon(OC/EC)ratio method were combined to estimate SOA in PM2.5.The results show that in urban Shenzhen,annual SOA mass concentration was 7.5μg m?3,accounting for 57%of total organic matter,with precursors emitted from vehicles as the major source.This work can serve as a case study for further in-depth research on PM2.5 pollution and source apportionment in China. 展开更多
关键词 PM2.5 source apportionment secondary organic aerosol(SOA)
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部