低粉尘浓度气体中细颗粒物(PM_(2.5))含量的测量

低粉尘浓度气体中细颗粒物(PM2.5)的测量用称重法和计数法都有困难,文章提出用稀释气体降低含尘浓度后,用激光尘埃计数器测量其中细颗粒物的数量,计算出质量浓度的办法。

Semiparametric Regression and Model Refining

This paper presents a semiparametric adjustment method suitable for general cases.Assuming that the regularizer matrix is positive definite,the calculation method is discussed and the corresponding formulae are presented.Finally,a simulated adjustment problem is constructed to explain the method given in this paper.The results from the semiparametric model and G_M model are compared.The results demonstrate that the model errors or the systematic errors of the observations can be detected correctly with the semiparametric estimate method.

FPGA-based High-precision Measurement Algorithm for the Ultrasonic Echo Time of Flight

Based on the evaluation of advantages and disadvantages of high-precision digital time interval measuring algorithms, and combined with the principle of the typical time-difference ultrasonic flow measurement, the requirements for the measurement of echo time of flight put forward by the ultrasonic flow measurement are analyzed. A new high-precision time interval measurement algorithm is presented, which combines the pulse counting method with the phase delay interpolation. The pulse counting method is used to ensure a large dynamic measuring range, and a double-edge triggering counter is designed to improve the accuracy and reduce the counting quantization error. The phase delay interpolation is used to reduce the quantization error of pulse counting for further improving the time measurement resolution. Test data show that the systexn for the measurement of the ultrasonic echo time of flight based on this algorithm and implemented on an Field Programmable Gate Army（FleA） needs a relatively short time for measurement, and has a measurement error of less than 105 ps.

New Algorithm Model for Processing GeneralizedDynamic Nonlinear Data Derived from Deformation Monitoring Network

The processing of nonlinear data was one of hot topics in surveying and mapping field in recent years. As a result, many linear methods and nonlinear methods have been developed. But the methods for processing generalized nonlinear surveying and mapping data, especially for different data types and including unknown parameters with random or nonrandom, are seldom noticed. A new algorithm model is presented in this paper for processing nonlinear dynamic multiple-period and multiple-accuracy data derived from deformation monitoring network.

Calculation of Significant Wave Height Using the Linear Mean Square Estimation Method

Significant wave height is an important criterion in designing coastal and offshore structures.Based on the orthogonality principle, the linear mean square estimation method is applied to calculate significant wave height in this paper.Twenty-eight-year time series of wave data collected from three ocean buoys near San Francisco along the California coast are analyzed.It is proved theoretically that the computation error will be reduced by using as many measured data as possible for the calculation of significant wave height.Measured significant wave height at one buoy location is compared with the calculated value based on the data from two other adjacent buoys.The results indicate that the linear mean square estimation method can be well applied to the calculation and prediction of significant wave height in coastal regions.

New method for analyzing recrystallization kinetics of deformed metal by differential scanning calorimeter

The drawn copper wires have been analyzed by differential scanning calorimeter(DSC) and a new method, which uses DSC measurements to determine the Johnson-Mehl-Avrami-Kolmogorov(JMAK) exponent via introducing Arrhenius behavior and modifying the baseline of DSC curves, has been proposed. The results show that JMAK exponent and recrystallization activation energy of the drawn copper wires with a strain of 2.77 are about 2.39 and 125 k J/mol, respectively. The line linking the tangency points of DSC curve hypotenuse can be used as the baseline when calculating recrystallization fraction. The JMAK exponent obtained by the DSC method is in a good agreement with that obtained by microhardness measurements. Compared to traditional methods to measure the exponent, the proposed method is faster and less labor intensive.

Estimation Method of Center of Inertia Frequency Based on Phasor Measurement Data

In the world, recent increased disturbances, congestion management problems, and increases of complexity in operating power systems have brought the need for integrations and improvements of power systems. Advanced applications in WAMPAC （wide area monitoring, protection, and control） systems provide a cost effective solution to improve system planning, operation, maintenance, and energy trading. Synchronized measurement technology and the application are an important element of WAMPAC. In addition, PMUs （phasor measurement units） are the most accurate and advanced time-synchronized technology available for WAMPAC application. Therefore, the original measurement system of PMUs has been constructed in Japan. This paper describes the estimation method of a center of inertia frequency by applying actual measurement data. The application of this method enables us to extract power system oscillations from measurement data appropriately. Moreover, this proposed method will help to the clarification of power system dynamics and this application will make it possible to realize the monitoring of power system oscillations associated with the power system stability.

A sequence pulse counting method for shape measurement in dual-beam speckle interferometry

A temporal approach to fast shape measurement is presented.In principle,the rotational object method is used in combination with the sequence pulse counting method (SPCM) to determine the height of the object through calculating the related phase.Two specimens are tested to demonstrate the validity of the approach.One is an object covered by a Chinese character (tea) with a height variety of 0.3 mm,and the other is an object surface with a relatively large fluctuation of 3.5 mm.The experimental results are compared with mechanical measurements.An axis shifting method is also proposed to determine shapes with relatively large fluctuations.Effects of such parameters on the height measurement as incident angle of the dual light beams,tilting angle of the object,and azimuth angle of the measured point are discussed as well.