This paper investigates the function of doubly-fed asynchronous machine(DASM)with emphasis placed on its ability to the stabilization of the power system including wind generators.P(active power)and Q(reactive power)c...This paper investigates the function of doubly-fed asynchronous machine(DASM)with emphasis placed on its ability to the stabilization of the power system including wind generators.P(active power)and Q(reactive power)compensation from DASM can be regulated independently through secondary-excitation controlling.Simulation results by power system computer aided design(PSCAD)show that DASM can restore the wind-generator system to a normal operating condition rapidly even following severe transmission-line failures.Comparison studies have also been performed between wind turbine pitch control and proposed method.展开更多
The development and experiment of a computer-controlled truck dispatching system in Surface mine is presented in this paper.It includes the system overall design, the system working mode design, the selection of the b...The development and experiment of a computer-controlled truck dispatching system in Surface mine is presented in this paper.It includes the system overall design, the system working mode design, the selection of the best truck travel path, the development of truck fleet programming, the development of database management system, and the development of truck real time dispatching, etc. The successful experiment is carried out in Huolinhe surface mine, and the satisfied results are obtained. Application of this system can improve the system production and the mine management. This system is the first one in our country at present.展开更多
Conventional vacuum control in a milking system is accomplished by using a vacuum pump, sized for the maximum air flows into the milking system, running at a full speed. The difference between the pump capacity and th...Conventional vacuum control in a milking system is accomplished by using a vacuum pump, sized for the maximum air flows into the milking system, running at a full speed. The difference between the pump capacity and the necessary flow of air is compensated by allowing air to enter the system through a regulator. The solution presented in this paper uses a VFD （variable frequency driver） in order to drive the vacuum pump at a controlled speed, so that the air removed equals the air entering the milking system. The VFD technology is able to adjust the rate of air removal from the milking system, by changing the speed of the vacuum pump motor. The VFD is controlled by a computer using a virtual instrument in order to emulate a PID （proportion integration differentiation） regulator. The tests aimed to evaluate the vacuum regulator characteristics and vacuum stability. A statistical analysis of the experimental results was performed and it showed that there was a significant difference between the experimental results obtained for the two methods of vacuum regulation （with vacuum regulator and VFD controller respectively）. The experimental results proved that the used of the VFD controller led to a higher vacuum stability in terms of the error between the set vacuum value and the achieved values.展开更多
文摘This paper investigates the function of doubly-fed asynchronous machine(DASM)with emphasis placed on its ability to the stabilization of the power system including wind generators.P(active power)and Q(reactive power)compensation from DASM can be regulated independently through secondary-excitation controlling.Simulation results by power system computer aided design(PSCAD)show that DASM can restore the wind-generator system to a normal operating condition rapidly even following severe transmission-line failures.Comparison studies have also been performed between wind turbine pitch control and proposed method.
文摘The development and experiment of a computer-controlled truck dispatching system in Surface mine is presented in this paper.It includes the system overall design, the system working mode design, the selection of the best truck travel path, the development of truck fleet programming, the development of database management system, and the development of truck real time dispatching, etc. The successful experiment is carried out in Huolinhe surface mine, and the satisfied results are obtained. Application of this system can improve the system production and the mine management. This system is the first one in our country at present.
文摘Conventional vacuum control in a milking system is accomplished by using a vacuum pump, sized for the maximum air flows into the milking system, running at a full speed. The difference between the pump capacity and the necessary flow of air is compensated by allowing air to enter the system through a regulator. The solution presented in this paper uses a VFD （variable frequency driver） in order to drive the vacuum pump at a controlled speed, so that the air removed equals the air entering the milking system. The VFD technology is able to adjust the rate of air removal from the milking system, by changing the speed of the vacuum pump motor. The VFD is controlled by a computer using a virtual instrument in order to emulate a PID （proportion integration differentiation） regulator. The tests aimed to evaluate the vacuum regulator characteristics and vacuum stability. A statistical analysis of the experimental results was performed and it showed that there was a significant difference between the experimental results obtained for the two methods of vacuum regulation （with vacuum regulator and VFD controller respectively）. The experimental results proved that the used of the VFD controller led to a higher vacuum stability in terms of the error between the set vacuum value and the achieved values.
