计量支付管理系统在陈沙公路建设中的应用

结合工程实例,从规范计量支付管理、加强变更的控制和管理、提高中期计量准确性与及时性、强大的计量分析和统计功能、智能监控体系等方面对计量支付管理系统在陈沙公路建设中的应用进行了阐述,以使计量支付工作更加及时准确、合理。

某工业园区无功计量问题分析

以某工业园区内配电网为例,进行了无功损耗计算和无功计量问题的分析,并根据用电侧配电网目前存在的问题,阐述了避免无功考核的相应措施和建议。

Application and optimization design of non-obstructive particle damping-phononic crystal vibration isolator in viaduct structure-borne noise reduction

The problems associated with vibrations of viaducts and low-frequency structural noise radiation caused by train excitation continue to increase in importance.A new floating-slab track vibration isolator-non-obstructive particle damping-phononic crystal vibration isolator is proposed herein,which uses the particle damping vibration absorption technology and bandgap vibration control theory.The vibration reduction performance of the NOPD-PCVI was analyzed from the perspective of vibration control.The paper explores the structure-borne noise reduction performance of the NOPD-PCVIs installed on different bridge structures under varying service conditions encountered in practical engineering applications.The load transferred to the bridge is obtained from a coupled train-FST-bridge analytical model considering the different structural parameters of bridges.The vibration responses are obtained using the finite element method,while the structural noise radiation is simulated using the frequency-domain boundary element method.Using the particle swarm optimization algorithm,the parameters of the NOPD-PCVI are optimized so that its frequency bandgap matches the dominant bridge structural noise frequency range.The noise reduction performance of the NOPD-PCVIs is compared to the steel-spring isolation under different service conditions.

试述抽样调查方法在历史研究中的应用

对统计学中抽样调查方法在历史研究中的应用进行了分析。

Numerical simulation of two-phase flow field in underwater sealing device based on dynamic mesh

In order to speed underwater launch of minor-caliber weapons,a sealing device can be set in front of underwater muzzle to separate water,preventing the muzzle from water immersion.By establishing and simplifying the model of underwater weapon sealing device and unstructured mesh computing domain model based on computational fluid dynamics（CFD）,dynamic mesh and user defined function（UDF）,the N-S equation is solved and the numerical analysis and calculation of the complex two-phase flow inside the sealing device are carried out.The results show that the gas discharged from the sealing device is conducive to the formation of the projectile supercavity.When the projectile is launched at 5munder water,the shock wave before and after the projectile has impact on the box body up to 100 MPa,therefore the sealing device must be strong enough.The research results have the vital significance to the design of underwater weapon sealing device and the formation of the projectile supercavitation.

Federated UKF algorithm for mobile location estimation with TDOA/Doppler measurements

In order to enhance the location estimation performance of mobile station（MS）tracking and positioning, a new method of mobile location optimal estimation based on the federated filtering structure and the simplified unscented Kalman filter （UKF） is presented. The proposed algorithm uses the Singer mobile statement model as the reference system, and the simplified UKF as the subfilters. The subfilters receive the two groups of independently detected time difference of arrival （TDOA） measurement inputs and Doppler measurement inputs, and produce local estimation outputs to the main estimator. Then the main estimator performs the optimal fusion of the local estimation outputs according to the scalar weighted rule, and a global optimal or suboptimal estimation result is achieved. Finally the main estimator gives feedback and reset information to the subfilters and the reference system for next step estimation. In the simulations, the estimation performance of the proposed algorithm is evaluated and compared with the simplified UKF method with TDOA or Doppler measurement alone. The simulation results demonstrate that the proposed algorithm can effectively reduce the location estimation error and variance of the MS, and has favorable performance in both root mean square error（RMSE） and mean error cumulative distribution function（CDF）.

PREPROCESSING AND POSTPROCESSING SYSTEM FOR FINITE ELEMENT COMPUTATION

This paper discusses some aspects of finite element computation,such as the automatic generation of finite element ,refinement of mesh,process of node density, distribution of load,optimum design and the drawing of stress contour, and describes the developing process of software for a planar 8 node element.

Research and Design of Sleeve Detach and Reunion Drive Mechanism of Screw Melt Extruder Equipment

The design of sleeve detach and reunion drive device of screw melt ex- truder equipment was optimized, based on the present installation of hygraulic drive device to achieve the mechanical opening and closing of the sleeve, the dynamic model of the sleeve detach and reunion drive was theoretically measured, and it was verified that the device is simple to operate and convenient to maintain, thus it has great social values.

Improved estimation of rotor position for sensorless control of a PMSM based on a sliding mode observer

This work proposes a new strategy to improve the rotor position estimation of a permanent magnet synchronous motor(PMSM) over wide speed range. Rotor position estimation of a PMSM is performed by using sliding mode observer(SMO). An adaptive observer gain was designed based on Lyapunov function and applied to solve the chattering problem caused by the discontinuous function of the SMO in the wide speed range. The cascade low-pass filter(LPF) with variable cut-off frequency was proposed to reduce the chattering problem and to attenuate the filtering capability of the SMO. In addition, the phase shift caused by the filter was counterbalanced by applying the variable phase delay compensation for the whole speed area. High accuracy estimation result of the rotor position was obtained in the experiment by applying the proposed estimation strategy.

Reliability evaluation for Weibull distribution under multiply type-? censoring

The multiply type-I censoring represented that all units in life test were terminated at different times. For estimations of Weibull parameters, it was easy to compute the maximum likelihood estimation （MLE） and least-squares estimation （LSE） while it was hard to build confidence intervals （CI）. The concept of generalized confidence interval （GCI） was introduced to build CIs of parameters under multiply type-I censoring. Further, GCI based on LSE and GCI based on MLE were proposed. It is mathematically proved that the former is exact and the latter is approximate. Besides, a Monte Carlo simulation study and an illustrative example also Ran out that the GCI method based on LSE yields rather satisfactory results by comparison with the ones based on MLE. It should be clear that the GCI method is a sensible choice to evaluate reliability under multiply type-I censoring.

A Closer Look at the Design of Cutterheads for Hard Rock Tunnel-Boring Machines

The success of a tunnel-boring machine （TBM） in a given project depends on the functionality of all components of the system, from the cutters to the backup system, and on the entire rolling stock. However, no part of the machine plays a more crucial role in the efficient operation of the machine than its cutterhead. The design of the cutterhead impacts the efficiency of cutting, the balance of the head, the life of the cutters, the maintenance of the main bearing/gearbox, and the effectiveness of the mucking along with its effects on the wear of the face and gage cutters/muck buckets. Overall, cutterhead design heavily impacts the rate of penetration （ROP）, rate of machine utilization （U）, and daffy advance rate （AR）. Although there has been some discussion in commonly available publications regarding disk cutters, cutting forces, and some design features of the head, there is limited literature on this subject because the design of cutter- heads is mainly handled by machine manufacturers. Most of the design process involves proprietary algorithms by the manufacturers, and despite recent attention on the subject, the design of rock TBMs has been somewhat of a mystery to most end-users. This paper is an attempt to demystify the basic concepts in design. Although it may not be sufficient for a full-fledged design by the readers, this paper allows engineers and contractors to understand the thought process in the design steps, what to Look for in a proper design, and the implications of the head design on machine operation and life cycle.

Statistical Properties and Confidence Limits about the Mean Time between the Failures (MTBF) in Failure-free Period Life Test (FFPLT)

On the basis of strict mathematical description about Failure_Free Period Life Test (FFPLT), the statistical properties of the tests and optimal confidence limit of the parameter are discussed in detail and corresponding calculating formulae are found out.

Open pit waste removal optimization through equipment fleet scheduling

A neighborhood search algorithm was proposed to simultaneously schedule the waste removal quantity and the equipment fleet profile over the mine life for open pit mines.An initial search domain was first defined and a good schedule was obtained as the current best schedule by searching in this domain.Then,progressively narrower neighborhood search domains were constructed around the current best schedule to search for better schedules.The objective is to minimize the present value of waste removal costs over the mine life.The resulting schedule from this algorithm provides a complete fleet profile for each year over the mine life:the selected equipment models,the number of equipment units of each model,the age of each unit,as well as the quantity of waste removed.A numerical example of application was provided to demonstrate the feasibility and merits of the algorithm.

Developing a Computer Program for Detailed Study of Planing Hull＇s Spray Based on Morabito＇s Approach

Recently, Morabito(2010) has studied the water spray phenomena in planing hulls and presented new analytical equations. However, these equations have not been used for detailed parametric studies of water spray around planing hulls. In this paper, a straight forward analysis is conducted to apply these analytical equations for finding the spray geometry profile by developing a computer program based on presented computational process. The obtained results of the developed computer program are compared against existing data in the literature and favorable accuracy is achieved. Parametric studies have been conducted for different physical parameters. Positions of spray apex are computed and three dimensional profiles of spray are examined. It is concluded that spray height increases by an increase in the speed coefficient or the deadrise angle. Ultimately, a computational process is added to Savitsky's method and variations of spray apex are computed for different velocities. It is shown that vertical, lateral, and longitudinal positions of spray increase as the craft speed increases. On the other hand, two new angles are defined in top view and it is concluded that they have direct relation with the trim angle. However, they show inverse relation with the deadrise angle.

Analysis of Petri net model and task planning heuristic algorithms for product reconfiguration

Reconfiguration planning is recognized as an important factor for reducing the cost of manufacturing reconfigurable products, and the associated main task is to generate a set of optimal or near-optimal reconfiguration sequences using some effect algorithms. A method is developed to generate a Petri net as the reconfiguration tree to represent two-state-transit of product, which solved the representation problem of reconfiguring interfaces replacement. Relating with this method, two heuristic algorithms are proposed to generate task sequences which considering economics to search reconfiguration paths effectively. At last, an objective evaluation is applied to compare these two heuristic algorithms to other ones. The developed reconfiguration task planning heuristic algorithms can generate better strategies and plans for reconfiguration. The research finds are exemplified with struts reconfiguration of reconfigurable parallel kinematics machine （RPKM）.

THE RESEARCH AND DESIGN OF RECONFIGURABLE COMPUTING FOR BLOCK CIPHER

This paper describes a new specialized Reconfigurable Cryptographic for Block ciphersArchitecture(RCBA).Application-specific computation pipelines can be configured according to thecharacteristics of the block cipher processing in RCBA,which delivers high performance for crypto-graphic applications.RCBA adopts a coarse-grained reconfigurable architecture that mixes the ap-propriate amount of static configurations with dynamic configurations.RCBA has been implementedbased on Altera’s FPGA,and representative algorithms of block cipher such as DES,Rijndael and RC6have been mapped on RCBA architecture successfully.System performance has been analyzed,andfrom the analysis it is demonstrated that the RCBA architecture can achieve more flexibility and ef-ficiency when compared with other implementations.

3-D computational method of wave loads on turret moored FPSO tankers

A three-dimensional method of calculating wave loads of turret moored FPSO (Flo ating Production Storage and Offloading) tankers is presented. The linearized restoring forces acting on the ship hull by the mooring system are calculated according to the catenary theory, which are expressed as the function of linear stiffness coefficients and the displacements of the upper ends of mooring chains. The hydrodynamic coefficients of the ship are calculated by the three-dimensional potential flow theory of the linear hydrodynamic problem for ships with a low forward speed. The equations of ship motions are established with the effect of the restoring forces from the mooring system included as linear stiffness coefficients. The equations of motions are solved in frequency domain, and the responses of wave-induced motions and loads on the ship can be obtained. A computer pro gram based on this method has been developed,and some calculation examples are illustrated. Analysis results show that the method can give satisfying prediction of wave loads.

Design of Metering Device Key Parts of Pneumatic Grass Seeder

Based on the mechanical and physical properties study of forage grass seeds, multi-line with one-device type metering device was designed. It was composed of adjustable screw, stirrer, metering device housing and central metering sheave and so on. The sowing rate can be set by turning the screw to change the working length of the central metering sheave relative to the metering device housing. The stirrer inside of the sheave housing is used to prevent seeds overhead. And metering of different sizes of seed is adjusted by changing the position of internal components of the slot wheel mechanism. Innovative design on the structure of the central metering sheave was finished. According to the structure parameters and physical characteristic parameters, different seed sowing rate of per hectares was calculated. And then the working length scale of the central metering groove wheel was made. And there is a one-to-one correspondence between scale values and sowing quantity per hectare of different kinds of seed.

Recommending Friends Instantly in Location-based Mobile Social Networks

Differently from the general online social network(OSN),locationbased mobile social network(LMSN),which seamlessly integrates mobile computing and social computing technologies,has unique characteristics of temporal,spatial and social correlation.Recommending friends instantly based on current location of users in the real world has become increasingly popular in LMSN.However,the existing friend recommendation methods based on topological structures of a social network or non-topological information such as similar user profiles cannot well address the instant making friends in the real world.In this article,we analyze users' check-in behavior in a real LMSN site named Gowalla.According to this analysis,we present an approach of recommending friends instantly for LMSN users by considering the real-time physical location proximity,offline behavior similarity and friendship network information in the virtual community simultaneously.This approach effectively bridges the gap between the offline behavior of users in the real world and online friendship network information in the virtual community.Finally,we use the real user check-in dataset of Gowalla to verify the effectiveness of our approach.

Principle and Method for Structural Design of Digital Woven Fabric

Digital woven textiles are one of the latest research areas of digital textiles. The key of research on design of digital woven fabrics lies in structural design. Nowadays, the application of digital design technology has fundamentally changed the concept of structural design of woven fabric, giving rise to design methods and effects that were deemed impossible before. A study has been carried out to analyze the nature of woven structures and the methods of structural design. This paper proposes an innovative principle and method of structural design under digital design concept, on which the design of digital gamut weaves and establishment of weave-database were presented to meet the requirement of balanced interlacement. It is envisaged that the results of this study will enhance future research in creation of digital woven fabrics, with particular emphasis on digital jacquard fabrics. Meanwhile, this study is also laid the foundation for the intelligent design of woven textile.