谈计费电能计量装置改造中应注意的技术问题

电能计量装置是计量供电部门销售电能,既计量用户使用电能多少的设备,是提供用电双方电贸易结算的法律依据。对计费电能计量装置进行技术改造以提升其计量性能是关系供用电双方的大事,是非常重要和必要的。

阀门开度指示器的改进设计

介绍了常用阀门开度指示器的使用现状与存在的问题 ,提出了采用磁电感应式转速传感器 ,将计量电机所排出的油液体积转换成脉冲数 。

阀位指示器及其指示调节

简要叙述了浸液式液压驱动蝶阀阀位指示器的主要结构及工作原理，并介绍了阀位指示器正确调节方法。

Study of the Adherence Mechanism Between the Metal and Inorganic Coating with Mill Addition of Li_2Ni_8O_(10) Nano Powder

The adherence strength between the metal and the inorganic coating can be greatly increased by mill addition of Li2Ni8O10. The interface structure between metal and the inorganic coating with excellent adherence has been studied by investigating the chemical composition and the microstrncture as well as elements valence bond on the interface with the help of scanning electron microscope （SEM）, electron microprobe, and Auger elctron spectroscope （AES）. The results show that there is a non-stoichiometrieal transitional layer on the interface between metal and the inorganic coating with excellent adherence, the adherence between metal and the non-stoichiometrical transitional layer is achieved by the metallic bond and the adherence between the non- stoichiometrical transitional layer and the inorganic coating is produced by ionic and covalent bond. The non-stoichiometrical transitional layer results in the strong adherence.

An iterative computation method for interpreting and extending an analytical battery model

Battery models are of great importance to develop portable computing systems,for whether the design of low power hardware architecture or the design of battery-aware scheduling policies.In this paper,we present a physically justified iterative computing method to illustrate the discharge,recovery and charge process of Li/Li-ion batteries.The discharge and recovery processes correspond well to an existing accurate analytical battery model:R-V-W's analytical model,and thus interpret this model algorithmically.Our method can also extend R-V-W's model easily to accommodate the charge process.The work will help the system designers to grasp the characteristics of R-V-W's battery model and also,enable to predict the battery behavior in the charge process in a uniform way as the discharge process and the recovery process.Experiments are performed to show the ac-curacy of the extended model by comparing the predicted charge times with those derived from the DUALFOIL simulations.Various profiles with different combinations of battery modes were tested.The experimental results show that the extended battery model preserves high accuracy in predicting the charge behavior.

A method for real power transfer allocation using multivariable regression analysis

A multivariable regression(MVR) approach is proposed to identify the real power transfer between generators and loads.Based on solved load flow results,it first uses modified nodal equation method(MNE) to determine real power contribution from each generator to loads.Then,the results of MNE method and load flow information are utilized to determine suitable regression coefficients using MVR model to estimate the power transfer.The 25-bus equivalent system of south Malaysia is utilized as a test system to illustrate the effectiveness of the MVR output compared to that of the MNE method.The error of the estimate of MVR method ranges from 0.001 4 to 0.007 9.Furthermore,when compared to MNE method,MVR method computes generator contribution to loads within 26.40 ms whereas the MNE method takes 360 ms for the calculation of same real power transfer allocation.Therefore,MVR method is more suitable for real time power transfer allocation.

Realization of Quantum Circuits in Fock Space

In this letter, by using the method we offered in our paper [L. Ma and Y.D. Zhang, Commun. Theor. Phys.(Beijing, China) 36 (2001) 119], some extended quantum logic gates, such as quantum counter, quantum adder, are studied and their expressions are given. It may be useful for us to study the more complicated quantum logic circuits deeply.

Position Sensorless Torque Estimation of Synchronous Reluctance Motors Based on Extended-Flux Model without Core-Loss Measurement

This paper proposes an extended-flux model with core-loss resistance of SynRMs （synchronous reluctance motors） and precise torque estimation without core-loss measurement and position encoder. The proposed torque estimation is useful for precise MTPA （maximum torque per ampere） control of position sensorless controlled SynRMs, which is achieved with the assistance of active and reactive powers.

Research and application on wireless remote measurement system of drill hydrology

The configuration, function, principle of operation and the main design of the wireless remote measurement system of drill hydrology based on GPRS were introduced in this paper. The current resources of GPIRS network was used by the system, and water level, water temperature and turbidity were measured by the intelligent sensors. Then the data were transmitted to the monitoring computer by the GPRS modem in wireless, which processed the data, forecasted and predicted water disaster. The monitoring computer software has the Chinese operation interface in the windows circumstance with simple and convenience using. The managers can operate every function by the Chinese cue. The data communications between the remote indicating instrument distributing in every drill and the monitoring computer is built only by one monitoring computer. The technology of data collection, GPRS wireless communication, computer, data processing, database were collected by the system, some functions such as real time supervising, early-warning, decision-making supporting, and so on had been achieved. The system has such merits as high precision, low cost, flexible distributing, credible transmitting and simple operation.

Low power implementation of datapath using regularity

Datapath accounts for a considerable part of power consumption in VLSI circuit design. This paper presents a method for physical implementation of datapath to achieve low power consumption. Regularity is a characteristic of datapath and the key of the proposed method, where synthesis is tightly combined with placement to make full use of regularity, so that low power consumption is achieved. In This paper, a new concept of Synthesis In Relative Placement (SIRP) is given to deal with the semi-regularity in some datapath. Experimental results of a sample circuit validated the proposed method.

Demand Charge under Nonsinusoidal Conditions

This paper aims to present a new point of view about the active power measurement, for billing purposes, measured at the PCC （point of common coupling） between the utility and the consumer when harmonic distortions are involved. Depending on theorigin of it, the active power can result in higher or lower values in comparison to the fundamental component. The consequences are higher costs for the consumer or losses for the electric utility. Using computational simulations and theoretical analysis, these aspects are evaluated and compared.

Recent Development in Data Processing and Control Research on the HL-2A ＆ HL-2M Tokamak

In 2006, except the basic improvement on HL-2A tokamak control system, data acquisition and processing system, a series of research activities have been developed in computer and control division. They include the construction of the high performance computer （HPC） system, the plasma configuration real-time reconstruction with EFIT code, the immigration of plasma simulation codes, the improvement of the poloidal field control system with circulating current, the design of the new data acquiring device with higher anti-disturbing power, the new software on soft X-ray spectrum measurement providing the multi-channel Te evolution, the upgrade to the HL-2A data storage system and experimental net. On the other hand, according to the arrangement of HL-2A modification project, a series of designs such as new plasma configuration, poloidal field coils distribution and plasma shape and position control system are on the processing.

Carbon-emission calculation of electromechanical energy consumption of different structures during the construction phase

Due to the use of mechanical and electrical equipments in different buildings during construction phase, energy consumption produces large amounts of carbon emissions.Based on the energy use of China, we established a formula that was applicable to carbon-emission calculation, and discussed carbon-emission characteristics of concrete structures and steel construction.Owing to the difference of electrical and mechanical equipment used in construction phase, the results show that under the same conditions, the carbon emission intensity of a concrete structure building is much higher than that of a steel building.At last, we also put forward some emission reduction measures based on the calculation data of different buildings.

Connecting Wind Turbine Generator to Distribution Power Grid--A Preload Flow Calculation Stage

A distribution grid is generally characterized by a high R/X （resistance/reactance） ratio and it is radial in nature. By design, a distribution grid system is not an active network, and it is normally designed in such a way that power flows from transmission system via distribution system to consumers. But in a situation when wind turbines are connected to the distribution grid, the power source will change from one source to two sources, in this case, network is said to be active. This may probably have an impact on the distribution grid to whenever the wind turbine is connected. The best way to know the impact of wind turbine on the distribution grid in question is by carrying out load flow analysis on that system with and without the connection of wind turbines. Two major fundamental calculations： the steady-state voltage variation at the PCC （point of common coupling） and the calculation of short-circuit power of the grid system at the POC （point of connection） are necessary before carrying out the load flow study on the distribution grid. This paper, therefore, considers these pre-load flow calculations that are necessary before carrying out load flow study on the test distribution grid. These calculations are carded out on a test distribution system.

Experimental investigation on cumulative propagation of thin film buckling under cyclic load

As instrument technology is needed for rapid determination of the smaller,thinner and lighter specimens,more stringent demands are related to thin films such as micro-electro-mechanical systems(MEMS),dielectric coatings and electronic packaging.Therefore,the requirement for testing platforms for rapidly determine the mechanical properties of thin films is increasing.Buckling of a film/substrate system could offer a variety of applications,ranging from stretchable electronics to micro-nanoscale metrology.In this paper,a fatigue-loading device has been designed to make the cyclic loading available for investigating the cumulative propagation of thin film buckling.The straight side buckling of thin compressed titanium film with the thickness of 50 nm deposited on organic glass substrates is investigated by using an optical microscope.The cumulative buckling propagation under the cyclic loading of a sequence of peak compression with the frequency 1 Hz is recorded by CCD camera.The buckling extension lengths are calculated by digital image measurement technology.