火工品可靠性计量-计数评估方法的有效性研究

采用Monte Carlo方法研究了GJB376规定的用计数数据估计火工品可靠度的方法和已建立的计量-计数评估方法在试验方面的等效性,根据评定准则采用这两种方法判定试验结果合格的接收率最大误差小于1%。对20种不同类型的火工品及两种人为设定为不合格产品,采用计量-计数法和步进法进行了对比试验研究,两种方法得到的可靠性评估结果一致。分析结果表明,计量-计数评估方法与GJB376规定的用计数数据估计火工品可靠度的方法等效,工程应用可行,对评估高可靠性的火工品,能大幅度降低样本量。

基于Python的流水线计数计量应用

随着信息技术发展,车间生产进入自动化已成为形势所趋。尤其大规模的生产企业,实现流水线自动化计数计量可以大大提高生产效率和精度。本文通过进行视频预处理,掌握边缘检测、区域分割、特征点检测与匹配技术。可对匀速移动的流水线上的相对位置固定的产品进行计数统计。减少人力劳动,提高自动化水平,计数准确性。

电子计时计数器

在检定冲击试验机过程中,用自动计时、计数方式代替手动秒表计时、默记周期数,测摆长,降低了测试的失误率,消除了人为误差,提高了测试精度。

Parameter Estimations of Rayleigh Distribution

设随机变量X服从Rayleigh分布，其密度函数为p(x;β)=2x/βe-x^2/β，x＞0,β＞0为参数，对变换群G={gc;gc(x)=c^2x,c＞0}，本文分别在平方损失和熵损失下研究了β在G上的最优同变估计；当β有先验信息时，给出了β的Bayes估计。

A LINEAR APPROACH TO METRIC CIRCUMFERENCE COMPUTATIO FOR DIGITIZED CONVEX SHAPES

Metric measurement of digitized shapes is commonly applied in optical measuring systems.In this letter,three shape-related factors defined by the authors are used in the construction of amultiple linear regression model which is utilized to compute the circumference of the convex shapes inmillimeter unit.The model is first built upon the relationship hypothesis and then its adequacy ismathematically validated.The results of applying the developed model to the given number of convexshapes in a finite circumferential length range suggest that,in terms of percent error,the model pre-cision is to satisfaction by being within±4%.The test also shows the model’s robustness against theshape’s orientation anisotropy.

Views on Piracy： Threats to International Peace

The study was conducted to ascertain the views on piracy among marine engineering students and marine officers who had encountered piracy on international waters thereby suggesting threats to international peace. The respondents of the study were 50, specifically distributed to thirty （30） onboard marine engineering students enrolled for the current school year 2014-2015 and twenty （20） marine officers who had experienced piracy at Somalia and other places. The researchers employed quantitative-qualitative research method design. The questionnaire on ＂Piracy at Sea＂ was validated by experts in research, statistics, qualitative research, and maritime international conventions. To test the reliability, this same instrument was pilot-tested among marine officers and students who had been on board international ships. Qualitative data were captured through interviews by using open-ended questions. Frequency count, percentage, and rank were used in this study for descriptive-quantitative statistics. The data were analyzed using appropriate statistics through computer-processed software （SPSS）. Qualitative analysis was employed to determine the views of the respondents on piracy so that mitigation measures were elicited for protection of life at sea leading towards international peace among identified HRAs （high-risk areas）. Results revealed that seafarers were familiar of piracy. They were aware that piracy usually happens in areas like Somalia water sand other threatening territories. To combat piracy, the participants have pointed out the role of the international community in their concerted effort to help seafarers safeguard their lives specifically during these hard times. Somalia also needs to effectively check their organization by whether or not strict implementation of the Anti Piracy Law was being observed. Full knowledge of piracy, techniques for avoiding it, and surviving pirate attacks are necessary among seafarers. Satellite system called shiplock allows shipping companies to monitor location of ships particularly useful during pirate attacks, hijacks, or ship theft. They also install non-lethal electrical fences around a ship＇s perimeter to protect them during these times. IMO regulations require ships to send distress signals and warnings covertly in case of pirate attacks.

Similarity measure design and similarity computation for discrete fuzzy data

The similarity computations for fuzzy membership function pairs were carried out.Fuzzy number related knowledge was introduced,and conventional similarity was compared with distance based similarity measure.The usefulness of the proposed similarity measure was verified.The results show that the proposed similarity measure could be applied to ordinary fuzzy membership functions,though it was not easy to design.Through conventional results on the calculation of similarity for fuzzy membership pair,fuzzy membership-crisp pair and crisp-crisp pair were carried out.The proposed distance based similarity measure represented rational performance with the heuristic point of view.Furthermore,troublesome in fuzzy number based similarity measure for abnormal universe of discourse case was discussed.Finally,the similarity measure computation for various membership function pairs was discussed with other conventional results.

Closure of q-Quantum Languages

η-quantum languages are discussed and some of their properties are derived. Furthermore the q-quantum language is defined. It is shown that L(A1A2)=L(A1)∩L(A2), L(A)=L(A1)∪L(A2). So over the same alphabet the intersection and union of two different q-quantum languages are also q-quantum languages.

Similarity measure design for high dimensional data

Information analysis of high dimensional data was carried out through similarity measure application. High dimensional data were considered as the a typical structure. Additionally, overlapped and non-overlapped data were introduced, and similarity measure analysis was also illustrated and compared with conventional similarity measure. As a result, overlapped data comparison was possible to present similarity with conventional similarity measure. Non-overlapped data similarity analysis provided the clue to solve the similarity of high dimensional data. Considering high dimensional data analysis was designed with consideration of neighborhoods information. Conservative and strict solutions were proposed. Proposed similarity measure was applied to express financial fraud among multi dimensional datasets. In illustrative example, financial fraud similarity with respect to age, gender, qualification and job was presented. And with the proposed similarity measure, high dimensional personal data were calculated to evaluate how similar to the financial fraud. Calculation results show that the actual fraud has rather high similarity measure compared to the average, from minimal 0.0609 to maximal 0.1667.

Analysis on the Level of Intra-industry Trade for ASEAN＇s Economy

This paper aims to examine and analyse the level of intra-industry trade on economy of ASEAN. These data obtained from the accurate and reliable source of ASEAN Trade Statistics databases. The importance of intra-industry and measurement is also described. Moreover, the linkage of intra-industry trade and investment liberalization under the ASEAN Economic Community （AEC） is also explained. The effective enhancement schemed to increase the competitiveness of specific industries had been proposed to enhance ASEAN to be efficient production hub and network of region that lead to the ultimate goal of single market. The further studies can be applied to construct and estimate the econometric model and forecasting technique to confirm the empirical results.

Adaptive Surface Reconstruction Based on Tensor Product Algebraic Splines

Surface reconstruction from unorganized data points is a challenging problem in Computer Aided Design and Geometric Modeling. In this paper, we extend the mathematical model proposed by Juttler and Felis （Adv. Comput. Math., 17 （2002）, pp. 135-152） based on tensor product algebraic spline surfaces from fixed meshes to adaptive meshes. We start with a tensor product algebraic B-spline surface defined on an initial mesh to fit the given data based on an optimization approach. By measuring the fitting errors over each cell of the mesh, we recursively insert new knots in cells over which the errors are larger than some given threshold, and construct a new algebraic spline surface to better fit the given data locally. The algorithm terminates when the error over each cell is less than the threshold. We provide some examples to demonstrate our algorithm and compare it with Juttler＇s method. Examples suggest that our method is effective and is able to produce reconstruction surfaces of high quality.

Variable Selection Procedures in Linear Regression Models with Screening Consistency Property

There are two fundamental goals in statistical learning： identifying relevant predictors and ensuring high prediction accuracy. The first goal, by means of variable selection, is of particular importance when the true underlying model has a sparse representation. Discovering relevant predictors can enhance the performance of the prediction for the fitted model. Usually an estimate is considered desirable if it is consistent in terms of both coefficient estimate and variable selection. Hence, before we try to estimate the regression coefficients β , it is preferable that we have a set of useful predictors m hand. The emphasis of our task in this paper is to propose a method, in the aim of identifying relevant predictors to ensure screening consistency in variable selection. The primary interest is on Orthogonal Matching Pursuit（OMP）.

Column Analyses of Chloride Breakthrough and Lead Retention in Amended Sandy Soils

Stormwater quality design manuals lack scientifically creditable bases for many novel LID （Low-Impact Development） designs presently proposed to meet stormwater runoff management requirements. Potential stormwater pollutant adsorption and infiltration enhancement capabilities of forest-derived by-products （e.g. woodchips, bio-char） provide an opportunity to combine these readily availability materials into stormwater quality designs. On-site stormwater runoff treatment through determination of the soil-water transport and lead （Pb） retention capacity of two sandy soils from Oregon is considered. Using synthetic stormwater （-120 mg CI/L and -5 mg Pb/L） displacement tests in pairs ofABS （Acrylonitrile butadiene styrene） soil columns （75 mm dia by 0.46 m tall） with upward flow （to minimize air entrapment） saturated hydraulic conductivity, chloride dispersion and Pb retention by plain and amended soils is evaluated. Generally, soil amendment incorporation （woodchips, compost or biochar） as compared to an amendment layer resulted in improved hydraulic conductivities as compared to that of the soil alone. Chloride breakthrough curves verified that resident soil-water displacement occurred with 0.9 to 1.6 pore volumes and residence times for most columns were 15-30 minutes. No synthetic stormwater Pb ＂breakthrough＂ within the displaced or replaced soil-water was found, rather most Pb was adsorbed within the first 150 mm of soil.

Analysis on Mathematics Teaching Goal Design Technology and Its Detection

Teaching goal design is an important link of teaching design, which has the teaching, learning and measurement function. How to establish the appropriate teaching goal and properly state to enhance its guidance and detection function are the important tasks of teaching design. This paper makes a programming and systematic analysis on the aspects of teaching goal design theory, teaching goal statement mode and technology, teaching goal statement and design and teaching goal design detection.

Isotropic Double Index for Quantum Errors in One Qubit

This article describes a proposal for a double index to estimate the isotropic components of unitary errors in a quantum computation circuit. In the context of this work the error is considered isotropic if it has spherical symmetry about the state of interest. The theoretical definition is given, as well the numerical approximation for practical purposes. The index is tested in some simple examples and the geometric distortion of the propagated error is studied for an inaccurate Shor 9-qubits correcting code.

A New Statistical Tool： Scalar Score Function

The basic inference function of mathematical statistics, the score function, is a vector function. The author has introduced the scalar score, a scalar inference function, which reflects main features of a continuous probability distribution and which is simple. Its simplicity makes it possible to introduce new relevant numerical characteristics of continuous distributions. The t-mean and score variance are descriptions of distributions without the drawbacks of the mean and variance, which may not exist even in cases of regular distributions. Their sample counterparts appear to be alternative descriptions of the observed data. The scalar score itself appears to be a new mathematical tool, which could be used in solving traditional statistical problems for models far from the normal one, skewed and heavy-tailed.

The Impact of Switching Standard on Accounting Quality

In a developing country, modernization and change of the accounting regime are possible if the standards are in compliance with global ones. The change of accounting standards adopted by Turkey started to be implemented, and this created a number of qualitative and quantitative results. This study examines the impact of change of accounting standards on accounting quality. In order to determine how switching standard reflects accounting quality, first of all, the earnings management, timely loss recognition, and value relevance variables pertaining to accounting quality were listed and the findings were stated after subjecting the obtained data to statistical analyses. Accordingly, by the transition to International Financial Reporting Standards （IFRS）, the earnings management practices were observed to decrease as compared with the pre-IFRS period and the timely loss recognition and value-relevance values were observed to increase, which constitute the dimensions of accounting quality. It was also concluded that by the switch from domestic accounting standards to International Accounting Standards （IAS）, the quality of accounting in the country was improved and the market became more active than it was before.

A parameter-free upwind scheme for all speeds' simulations

With the rapid development of the computational fluid dynamics(CFD),a parameter-free upwind scheme capable of simulating all speeds accurately and efficiently is in high demand.To achieve this goal,we present a new upwind scheme called AUSMPWM in this paper.This scheme computes the numerical mass flux as the AUSMPW+and computes the interfacial sound speed in a different way.Also,it computes the pressure flux by limiting the dissipation if the Mach number is less than 1.Series of numerical experiments show that AUSMPWM can satisfy the following attractive properties independent of any tuning coefficient:(1)Robustness against the shock anomaly and high discontinuity’s resolution;(2)high accuracy on hypersonic heating prediction and capability to give smooth reproductions of heating profiles;(3)low dissipation at low speeds;and(4)strong grid,reconstruction scheme,and Mach number independence in low speeds’simulations.These properties suggest that AUSMPWM is promising to be widely used to accurately and efficiently simulate flows of all speeds.

Empirical likelihood hypothesis test on mean with inequality constraints

Hypothesis test on the population mean with various inequality constraints is studied in this paper.The empirical likelihood method is applied to construct test statistics.Limiting distributions of the empirical likelihood ratio test statistics are proven to be a weighted mixture of chi-square distributions.Numerical results are presented to show the validity of the proposed method.