Procedures of preparation of numerical analysis,consisting in a simulation of cooperation of three different media: steel,liquid and gas undergoes dynamic load were discussed.Modelling of the initial static load of th...Procedures of preparation of numerical analysis,consisting in a simulation of cooperation of three different media: steel,liquid and gas undergoes dynamic load were discussed.Modelling of the initial static load of the mechanical system was presented.By using the MSC.Software products the following exemplary computer simulations were made: dynamic load impact on the hydraulic leg as well as effectiveness of the hydraulic leg protection against overload with help of gas accumulator.展开更多
Various technical studies have shown that impact-stiffness modulus values, defined as the ratio of the FWD （falling-weight deflectometer） impact load to its consequent central deflection, can be used to evaluate the...Various technical studies have shown that impact-stiffness modulus values, defined as the ratio of the FWD （falling-weight deflectometer） impact load to its consequent central deflection, can be used to evaluate the PCN （pavement classification number） of a particular flexible or rigid airport pavement, fn a previous study, use was made of the old dynamic stiffness modulus procedure developed by the USCOE （US Army Corps of Engineers）, this procedure was correlated with various FWD measurements conducted on several runways and taxiways in Israel, together with in-situ borings and the use of the new COMFAA-3.0 software. The results, obtained only for flexible pavements, were checked against the relevant results of full-scale trafficking tests conducted by the FAA （Federal Administration Aviation） at its National Airport Pavement Test Facility. The present study analyzes new FWD measurements and in-situ borings conducted on additional rigid and all-asphaltic runways and taxiways in Israel in order to formulate an updated correlative equation for these types of pavements. The paper concludes with an updated recommendation for the use of impact-stiffness modulus outputs from FWD measurements in order to determine the PCN of any type of pavement directly on the basis of local experience.展开更多
This paper performs an experimental study for inverse load reconstruction. By measuring and analyzing the load characteristics of different home and office electric devices, the author shows that a reconstruction of t...This paper performs an experimental study for inverse load reconstruction. By measuring and analyzing the load characteristics of different home and office electric devices, the author shows that a reconstruction of the individual power consumption of different loads from the total measurement of a single power meter is possible.展开更多
The loads acting on shield tunneling machines are basic parameters for the equipment design as well as key control parameters throughout the entire operation of the equipment. In the study, a mechanical analysis for t...The loads acting on shield tunneling machines are basic parameters for the equipment design as well as key control parameters throughout the entire operation of the equipment. In the study, a mechanical analysis for the coupled interactive system between the cutterhead and the ground at the excavation face is conducted. The normal and tangential loads acting on the cutterhead are decoupled and solved, with consideration of the influence of three key factors on loads: geological condition, operating status and equipment structure. Then analytical expressions for the thrust and the torque acting on the equipment under uniform geological condition are established. On this basis, the impact of soil-rock interbedded ground on acting loads is further considered. A theoretical model for loads prediction of earth pressure balance (EPB) shield machines working under soil-rock interbedded ground is proposed. This model is subsequently applied to loads prediction for a shield tunneling project under soil-rock interbedded ground. The computational value of the thrust and the torque, the measured loads and the load ranges from Krause empirical formula are compared. Thus, this model for loads prediction acting on shield tunneling machines under soil-rock interbedded ground has been proved to be effective.展开更多
文摘Procedures of preparation of numerical analysis,consisting in a simulation of cooperation of three different media: steel,liquid and gas undergoes dynamic load were discussed.Modelling of the initial static load of the mechanical system was presented.By using the MSC.Software products the following exemplary computer simulations were made: dynamic load impact on the hydraulic leg as well as effectiveness of the hydraulic leg protection against overload with help of gas accumulator.
文摘Various technical studies have shown that impact-stiffness modulus values, defined as the ratio of the FWD （falling-weight deflectometer） impact load to its consequent central deflection, can be used to evaluate the PCN （pavement classification number） of a particular flexible or rigid airport pavement, fn a previous study, use was made of the old dynamic stiffness modulus procedure developed by the USCOE （US Army Corps of Engineers）, this procedure was correlated with various FWD measurements conducted on several runways and taxiways in Israel, together with in-situ borings and the use of the new COMFAA-3.0 software. The results, obtained only for flexible pavements, were checked against the relevant results of full-scale trafficking tests conducted by the FAA （Federal Administration Aviation） at its National Airport Pavement Test Facility. The present study analyzes new FWD measurements and in-situ borings conducted on additional rigid and all-asphaltic runways and taxiways in Israel in order to formulate an updated correlative equation for these types of pavements. The paper concludes with an updated recommendation for the use of impact-stiffness modulus outputs from FWD measurements in order to determine the PCN of any type of pavement directly on the basis of local experience.
文摘This paper performs an experimental study for inverse load reconstruction. By measuring and analyzing the load characteristics of different home and office electric devices, the author shows that a reconstruction of the individual power consumption of different loads from the total measurement of a single power meter is possible.
基金supported by the National Natural Science Foundation of China (Grant No. 11127202)the National High-Tech Research & Development Program of China ("863" Program) (Grant No. 2012AA041801)
文摘The loads acting on shield tunneling machines are basic parameters for the equipment design as well as key control parameters throughout the entire operation of the equipment. In the study, a mechanical analysis for the coupled interactive system between the cutterhead and the ground at the excavation face is conducted. The normal and tangential loads acting on the cutterhead are decoupled and solved, with consideration of the influence of three key factors on loads: geological condition, operating status and equipment structure. Then analytical expressions for the thrust and the torque acting on the equipment under uniform geological condition are established. On this basis, the impact of soil-rock interbedded ground on acting loads is further considered. A theoretical model for loads prediction of earth pressure balance (EPB) shield machines working under soil-rock interbedded ground is proposed. This model is subsequently applied to loads prediction for a shield tunneling project under soil-rock interbedded ground. The computational value of the thrust and the torque, the measured loads and the load ranges from Krause empirical formula are compared. Thus, this model for loads prediction acting on shield tunneling machines under soil-rock interbedded ground has been proved to be effective.
