It is necessary to reduce hydrogen consumption to meet increasingly strict environmental and product-quality regulations for refinery plants. In this paper, the concentration potential concepts proposed for design of ...It is necessary to reduce hydrogen consumption to meet increasingly strict environmental and product-quality regulations for refinery plants. In this paper, the concentration potential concepts proposed for design of water-using networks are extended to synthesis of hydrogen networks with multiple contaminants. In the design procedure, the precedence of processes is determined by the values of concentration potential of demands.The usage of complementary source pair(s) to reduce utility consumption is investigated. Three case studies are presented to illustrate the effectiveness of the method. It is shown that the design procedure has clear engineering meaning.展开更多
This paper discusses many fundamental relationships between robust design methods and reliability improvement. There are 3 approaches in robust design, system design, parameter design and tolerance design. All three ...This paper discusses many fundamental relationships between robust design methods and reliability improvement. There are 3 approaches in robust design, system design, parameter design and tolerance design. All three approaches can be used to improve product reliability in different aspects. Robust design method and reliability engineering should be combined to enhance the overall product quality and reliability.展开更多
An approach for the economic analysis of chemical product design is proposed. It takes into account of customers' preference on product quality and economic considerations such as pricing, profit, market share, ca...An approach for the economic analysis of chemical product design is proposed. It takes into account of customers' preference on product quality and economic considerations such as pricing, profit, market share, capital investment, and operating cost. The activities needed to support business decision making – identifying product quality, estimating product cost, calculating financial metrics, and performing make–buy analysis – are discussed.The design of a Ganoderma lucidum dietary supplement, a traditional Chinese medicinal(TCM) product, is used to illustrate all the activities in this approach.展开更多
To minimize losses between harvest and retail display, a system is needed to track temperature and RH exposure of fresh produce and predict its quality at each step of the distribution chain. With accurate models, suc...To minimize losses between harvest and retail display, a system is needed to track temperature and RH exposure of fresh produce and predict its quality at each step of the distribution chain. With accurate models, such system could （1） identify problematic situations before losses occur; （2） become a management tool for decision makers; and （3） help quantify the real impact of individual inappropriate conditions. A project was initiated to develop models required for such a decision system. Because the data required to develop models were not available for most fruit and vegetables, a series of storage trials was planned for measuring changes in physiological and microbial quality, and development of physiological disorders and/or diseases, as a function of time, temperature and RH. To meet this objective, controlled environment mini-chambers were designed, built and instrumented for measuring the effect of traceable environmental conditions encountered during storage and transportation of fresh horticultural produce of similar size and shape as tomato. Detailed design and performance evaluation of these mini-chambers are presented.展开更多
Fifteen turmeric genotypes from the germplasm held at National Root Crops Research Institute Umudike, Nigeria, were evaluated during the season of 2012-2013 at four locations-Jos （8.3833°N, 7.1833°E, 1,200 ...Fifteen turmeric genotypes from the germplasm held at National Root Crops Research Institute Umudike, Nigeria, were evaluated during the season of 2012-2013 at four locations-Jos （8.3833°N, 7.1833°E, 1,200 m a.s.l.）, Otobi （7.11667°N and 8.08333°E）, Umudike （5.4758°N, 7.5489°E） and Igbariam （6.4°N and 6.93333°E）-in order to select high yielding and stable turmeric cultivars with good quality for release in Nigeria. At each location, the experiment was laid out in randomized complete block design （RCBD） in three replications. Plot size was 9 m2. Data were collected on sprout count, plant height, number of tillers, number of leaves, main pseudo stem girth, rhizome number and weight. Analysis of variance was carried out on the combined data using GenStat Discovery Edition software. Results based on the combined data from four locations indicate that turmeric genotypes did not vary in percentage emergence and number of leaves. However, they varied in height, main pseudo stem girth, tillering, number and yield of fresh rhizomes. The effect of location on all attributes was significant （P 〈 0.05） with Jos location giving consistently the least values for all attributes thus suggesting that this location may not be suitable for the commercial production of turmeric. Genotype by environment interaction for most attributes was not significant indicating that the genotypes responded the same way across the locations. Ten genotypes, viz., UT39, UT44, UT46, UT58, UT50, UTI4, UT41, UT6, UT38 and UT35, are identified as promising and require further evaluation as pre-condition for nomination for official release to farmers.展开更多
Based on statistical analysis,this paper states that four types of rural infrastructure as roads,electricity, communications,and education have statistically significant effects on agricultural production,nonagricultu...Based on statistical analysis,this paper states that four types of rural infrastructure as roads,electricity, communications,and education have statistically significant effects on agricultural production,nonagricultural production,and farmers’income in China.However,the specifics and the degrees of these influences are different. Therefore, different policies have to be implemented respectively to make full use ofthe limited funds in China. Meanwhile, the maturity level of rural infrastructure as with rural economic development has regional discrepancy. The levels of maturity decrease from east to west.It is urgent that the current weak situation of the ruralinfrastruc- ture in western China needs to be improved.展开更多
文摘为了提高产品质量的稳定性和可靠性,利用机器学习方法实现产品质量在线监控、在线优化和在线预设定,是钢铁企业目前亟待解决的关键技术.针对企业需求,提出基于软超球体算法的产品质量异常在线识别和异常原因诊断方法、基于流形学习的工艺参数在线优化方法和基于多变量统计过程控制的工艺规范制定方法.通过将上述方法进行系统集成,并利用工业互联网技术和大数据分析方法,研发了产品质量在线智能监控系统.目前该系统已在钢铁企业十余条生产线上推广应用,质量在线判定的准确率达到99.2%,在线检测时间不到0.1 s.
基金Supported by the National Natural Science Foundation of China(21176057)the National Basic Research Program of China(2012CB720305)the State Key Laboratory of Chemical Engineering(Open Research Project Skloche-K-2011-04)
文摘It is necessary to reduce hydrogen consumption to meet increasingly strict environmental and product-quality regulations for refinery plants. In this paper, the concentration potential concepts proposed for design of water-using networks are extended to synthesis of hydrogen networks with multiple contaminants. In the design procedure, the precedence of processes is determined by the values of concentration potential of demands.The usage of complementary source pair(s) to reduce utility consumption is investigated. Three case studies are presented to illustrate the effectiveness of the method. It is shown that the design procedure has clear engineering meaning.
文摘This paper discusses many fundamental relationships between robust design methods and reliability improvement. There are 3 approaches in robust design, system design, parameter design and tolerance design. All three approaches can be used to improve product reliability in different aspects. Robust design method and reliability engineering should be combined to enhance the overall product quality and reliability.
文摘An approach for the economic analysis of chemical product design is proposed. It takes into account of customers' preference on product quality and economic considerations such as pricing, profit, market share, capital investment, and operating cost. The activities needed to support business decision making – identifying product quality, estimating product cost, calculating financial metrics, and performing make–buy analysis – are discussed.The design of a Ganoderma lucidum dietary supplement, a traditional Chinese medicinal(TCM) product, is used to illustrate all the activities in this approach.
文摘To minimize losses between harvest and retail display, a system is needed to track temperature and RH exposure of fresh produce and predict its quality at each step of the distribution chain. With accurate models, such system could （1） identify problematic situations before losses occur; （2） become a management tool for decision makers; and （3） help quantify the real impact of individual inappropriate conditions. A project was initiated to develop models required for such a decision system. Because the data required to develop models were not available for most fruit and vegetables, a series of storage trials was planned for measuring changes in physiological and microbial quality, and development of physiological disorders and/or diseases, as a function of time, temperature and RH. To meet this objective, controlled environment mini-chambers were designed, built and instrumented for measuring the effect of traceable environmental conditions encountered during storage and transportation of fresh horticultural produce of similar size and shape as tomato. Detailed design and performance evaluation of these mini-chambers are presented.
文摘Fifteen turmeric genotypes from the germplasm held at National Root Crops Research Institute Umudike, Nigeria, were evaluated during the season of 2012-2013 at four locations-Jos （8.3833°N, 7.1833°E, 1,200 m a.s.l.）, Otobi （7.11667°N and 8.08333°E）, Umudike （5.4758°N, 7.5489°E） and Igbariam （6.4°N and 6.93333°E）-in order to select high yielding and stable turmeric cultivars with good quality for release in Nigeria. At each location, the experiment was laid out in randomized complete block design （RCBD） in three replications. Plot size was 9 m2. Data were collected on sprout count, plant height, number of tillers, number of leaves, main pseudo stem girth, rhizome number and weight. Analysis of variance was carried out on the combined data using GenStat Discovery Edition software. Results based on the combined data from four locations indicate that turmeric genotypes did not vary in percentage emergence and number of leaves. However, they varied in height, main pseudo stem girth, tillering, number and yield of fresh rhizomes. The effect of location on all attributes was significant （P 〈 0.05） with Jos location giving consistently the least values for all attributes thus suggesting that this location may not be suitable for the commercial production of turmeric. Genotype by environment interaction for most attributes was not significant indicating that the genotypes responded the same way across the locations. Ten genotypes, viz., UT39, UT44, UT46, UT58, UT50, UTI4, UT41, UT6, UT38 and UT35, are identified as promising and require further evaluation as pre-condition for nomination for official release to farmers.
文摘Based on statistical analysis,this paper states that four types of rural infrastructure as roads,electricity, communications,and education have statistically significant effects on agricultural production,nonagricultural production,and farmers’income in China.However,the specifics and the degrees of these influences are different. Therefore, different policies have to be implemented respectively to make full use ofthe limited funds in China. Meanwhile, the maturity level of rural infrastructure as with rural economic development has regional discrepancy. The levels of maturity decrease from east to west.It is urgent that the current weak situation of the ruralinfrastruc- ture in western China needs to be improved.
