设计数学化初探

本文结合时下的设计背景,探索性地提出"设计数学化"的概念,并通过对数学在当代设计中运用的大量案例进行举证,论证数学化能够使设计获得形式上的美感及创作中的规律。同时,结合"设计数学化"的发展现实,对其日后的发展之路进行预测与展望,试图为设计数学化的发展之路提供一条有益的思路。

RESEARCH OF THE PARAMETRIC ASSEMBLY METHOD

The parametric part assembly generation method is presented. Based on the parametric part generated by means of constructive-element, through interactively inputting the relationships of the location and the assembly, and by compiling operations like movement and rotation, the assembly drawing is created so as to implement the occurrence of the parameterizations of the assembly and the part drawing. The data structure of the assembly part and the key technologies of hidden line removal in the implementation of assembly process, etc. , are described in detail.

A motion retargeting algorithm based on model simplification

A new motion retargeting algorithm is presented, which adapts me motion capture data to a new character. To make the resulting motion realistic, the physically-based optimization method is adopted. However, the optimization process is difficult to converge to the optimal value because of high complexity of the physical human model. In order to address this problem, an appropriate simplified model automatically determined by a motion analysis technique is utilized, and then motion retargeting with this simplified model as an intermediate agent is implemented. The entire motion retargeting algorithm involves three steps of nonlinearly constrained optimization： forward retargeting, motion scaling and inverse retargeting. Experimental results show the validity of this algorithm.

Analyzing the Relation Between Earthquakes and Active Faults Based on the Parameter Optimization Model

The gestation and occurrence of strong earthquakes are closely related to fault activity, which is not only revealed by abundant experimentation and seismism but also proved by modern seismology. On the Chinese mainland, the relation between earthquake activity and active faults is one of the bases for partitioning potential seismic sources, analyzing the seismotectoulcs and estimating location of strong earthquakes.Due to the nonuniformity of earth media, instability of observation systems and disturbance of the environment, etc, the variety of observational data is complicated, that is, there is no absolutely ＂normal＂ or ＂abnormal＂, and seismic anomalies can be divided into many mutually exdusive＂ abnormal states＂. In different conditions of combined time-spacestrength, determining seismic anomalies by different monomial forecast methods and its efficiency could be different due to the uncertainty of a precursor itself or complexity of the relationship between a precursor and earthquake gestation. It is very difficult to discover and dispose of this difference in actual application in a ＂two-state＂ model. But in a ＂multi-state＂ model, the difference can be easily reflected and the optimal combination of forecasting parameters for a forecast method can also be determined easily. Based on the ＂multi-state＂ precursory model and the optimization method for parameters of earthquake forecast model under the condition of optimal forecast efficiency, the relationship of the spatial location of earthquake with M ≥ 6.0 and active faults in three seismic belts are analyzed. The results demonstrate that in the Hetao Seismic Belt, seismicity is mostly concentrated in the range of 20 km along the fault, the optimization model can forecast the location of potential earthquakes of M ≥ 6.0 near the faults with a relatively high accuracy and the reliability is 0.5 ; while in the Qilian Mt. Seismic Belt, the reliability only reaches 0.14 when we use the model to estimate earthquakes within 30 km range along the faults. The ＂multi-state＂ precursory model, the efficiency-evaluating model and the parameter selection of individual earthquake forecast model based on optimal efficiency are of certain revelatory and practicable meanings for developing knowledge about precursors, investigating the laws of earthquake preparation and searching for optimal forecasting methods.

Optimization of compound gear pump

This paper introduces the performances of compound gear pump. Based on the target of having the smallest mass per unit volume, the paper established a mathematical model of optimization, and obtained the results of optimization of the pump.

Optimization Design for Digital Binoculars

In order to develop competitive and high performance/cost ratio of digital binoculars, design scheme should be optimized in term of technical capacity, economic benefit, product performance, risk management, etc. The common optimization method is limited in qualitative analysis, and the parameter optimization method is limited in obtaining optimal parameter only from technical side. Each method has its limitation. Based on the analysis of digital binoculars parameters, optional design schemes are laid down. Analytic hierarchy process combined the qualitative analysis with the quantitative analysis together. The design schemes are optimized, and resuh is worked out.

Prediction of Critical Endpoints Based on the PR Equation of State

In the design of chemical processes,such as catalytic cracking of bitumen and heavy oil,the knowledge of phase behavior at the critical endpoint is essential.Based on the PR equation of state,the algorithm developed by Heidemann and Khalil for calculating critical properties was used to compute critical points.An algorithm for determining the equilibrium phase of the critical point using the tangent plane criterion was developed,and was used to calculate the critical endpoints of different mixtures,including non-polar,polar and associating systems.The critical endpoint,representing the type of the phase behavior,was employed to fit the interaction parameter of mixtures in critical state at high pressure.Lines of critical endpoints for ternary mixtures were also determined with the algorithm.

Teaching Design on Digital Environment of Intelligence Learning

The practice and research on the establishment of digital course environment and the reform of learning way breaks through the integration of information technology and teaching courses. Digital course environment promotes the teaching interest and becomes the learning under the support of learning terminal, which must make students happy. The digitalization of teaching materials, platform of learning and learning according to requirements promotes the establishment of happy class. Establishment of learning environment is the basis of realizing the reform of learning and teaching ways. With the rapid development of information technology, intelligence learning is the necessary outcome of deep integration with education learning.

新工科背景下重塑电子技术教学体系实践研究

面向新工科高素质专业人才培养目标要求,在电子技术教学中切实践行“教育强国”理念,通过对电子技术教学内容组织、教学主线与关键点梳理、教学运行实践等方面研究,提出了电子技术教育教学重塑观点,经由电子技术教学内容重塑性分析,提出电子技术以电子器件为基础,以反馈分析法贯穿电子电路教学思路,以技术创新为引导,注重电子电路近似化模型教学,电子技术数学建模思维培养的教学理念和教学思路。经由电子技术课程组近几年的教学实践与总结,文章提出的创新性教学理念与教学设计是有成效的,取得较好的教学效果。

Opti mal design of alow-loss2-bit electrooptic analog-to-digital converter

The structure of the optical waveguide of 2-bit electrooptic A/D converter with proton-exchange micro prisms is optimized by the finite-difference beam propagation method (FD-BPM). The electrode parameters of the converter are optimized by conformal mapping. The optimal parameters are a half-wave voltage of (Vπ= 4.5 V) and a bandwidth of (Δf=1.4 GHz).A normalized transmitted power of 69.75% is obtained by FD-BMP and the output waveguide gap is 300 μm.

Design optimization on the front wheel orientation parameters of a vehicle

A uniform optimization object function for front wheel orientation parameters of a vehicle is reported, which includes the tolerances of practical values and set values of front wheel orientation parameters under full load, and the changing value of each parameter with front wheel fluctuation to build a front suspension model for optimization analysis based on the multi-body dynamic (MD) theory. The original suspension is optimized with this model, and the variation law of each parameter with front wheel fluctuation is obtained. The results of a case study demonstrate that the front wheel orientation parameters of the optimized vehicle are reasonable under typical conditions and the variation of each parameter is in an ideal range with the wheel fluctuating within 40 mm. In addition, the driving performance is improved greatly in the road test and practical use.

Matrix Expression of the Orthogonal Wavelet (Packets) Transform

Matrix expression of finite orthogonal wavelet transform of finite impulse response signal is more valuable for theoretical analysis and understanding. However, clear deduction for matrix expression has not been provided yet. In this paper, the formulation to generate the re-lated matrix is put forward and the theorem on the orthogonality of this matrix proved. This effort deploys a basis for more deeper and wider applications in chemical processes. *

Prediction of pyrolysis kinetic parameters from biomass constituents based on simplex-lattice mixture design

The aim of this study is to determine the effect of the main chemical components ofbiomass： cellulose, hemicel- lulose and lignin, on chemical kinetics ofbiomass pyrolysis. The experiments were designed based on a simplex- lattice mixture design. The pyrolysis was observed by using a thermogravimetric analyzer. The curves obtained from the employed analytical method fit the experimental data （R2 〉 0.9）. This indicated that this method has the potential to determine the kinetic parameters such as the activation energy （E~）, frequency factor （A） and re- action order （n） for each point of the experimental design. The results obtained from the simplex-lattice mixture design indicated that cellulose had a significant effect on Ea and A, and the interaction between cellulose and lignin had an important effect on the reaction order, n. The proposed models were then proved to be useful for predicting pyrolysis behavior in real biomass and so could be used as a simple approximation for predicting the overall trend of chemical reaction kinetics.

The design and practice of giant hydro turbine generating units of Three Gorges Project

The main technical problems that should be considered in the design of hydro-turbine generating units of Three Gorges Project (TGP) are analyzed;the key technical researches performed are summarized,and the parameters of hydro-turbine generating units are optimized through the study on key technical problems.The unit operation indicates that the performance of the hydro-turbine generating units is excellent,and the units can operate in a safe,stable and highly efficient mode for a long term.Therefore,it is verified effectively that the general technical design of units is scientific and rational.

Members of University Digital Management Information System Design and Implementation Base on Three-Tier

In accordance with the organizational development process and management of party members, in this article it is based on the C/S and B/S mixed structure to finish the application design of client and servers, and using the language of VB.NET develop with Inner Mongolia Agricultural University, members of University College Digital Management Information System. The system from research projects of Agriculture University Occupation Technical College of Inner Mongolia.

The Influence of the Concepts of Biophilia and Biomimicry in Contemporary Architecture

The contemporary demand for reducing carbon emission is changing the way architects design buildings, thus influencing a wide range of new solutions. In this paper, the author presents a method that intends to contribute for the discussion of recent strategies that lower the buildings＇ consumption of energy. The study establishes three priority parameters to analyze the faqades based on the materials, the practices and the thermal behavior. Each parameter is measured separately scaled from artificial to natural building materials, local to distant practices and insulation to inertia. The design of facades has been evolving to follow complex regulations that aim to increase the required sustainable performance of buildings. Scientific data is measurable individually by each parameter, though the cross influence between parameters raise the level of complexity. Shading systems, solar passive energy influence the measurement but the growing use of renewable energies affects the measurements of energy consumption. Each design responds differently to climatic conditions, and requires complex analyses considering the specificity of the natural environment and cultural context. The discussion makes use of scientific data that influences architectural design, the research requires a broader perception thus including cultural aspects. Recent high tech insulating systems have an effect on design solutions that characterize biophilia （human love of nature）. The wisdom of traditional local solutions tested over generations holds cultural aspects of biomimicry （nature as model）. The aim is to discuss whether the framework based on biophilia and biomimicry is useful for the research.

Discussion on Art Design Education in Colleges and Universities in Digital

At present, the reform of colleges and universities in our country is in full swing. In the course of teaching design of art in colleges and universities, it is necessary to change the teaching mode in time to adapt to the new teaching development environment. In the era of digital development, we need to give full attention to the optimization of art design teaching in colleges and universities, and run new teaching techniques. This paper mainly analyzes the advantages and importance of the digital art design in colleges and universities, and then discusses the application of digital technology in the art design teaching and the concrete teaching optimiTatiun strategy in detail. Hoping to through this theoretical research, contribute to the improvement of the quality of art design teaching.

Blade Parameterization and Aerodynamic Design Optimization for a 3D Transonic Compressor Rotor

The present paper describes an optimization methodology for aerodynamic design of turbomachinery combined with a rapid 3D blade and grid generator （RAPID3DGRID）, a N.S. solver, a blade parameterization method （BPM）, a gradient-based parameterization-analyzing method （GPAM）, a response surface method （RSM） with zooming algorithm and a simple gradient method. By the use of blade parameterization method a transonic com- pressor rotor can be expressed by a set of polynomials, and then it enables us to transform coordinate-expressed blade data to parameter-expressed and then to reduce the number of parameters. With changing any one of the parameters and by applying grid generator and N.S. solver, we can obtain several groups of samples. Here only ten parameters were considered to search an optimized compressor rotor. As a result of optimization, the adiabatic efficiency was increased by 1.73%.