A low-power-consumption 9bit 10MS/s pipeline ADC,used in a CMOS image sensor,is proposed. In the design, the decrease of power consumption is achieved by applying low-power-consumption and large-output-swing amplifier...A low-power-consumption 9bit 10MS/s pipeline ADC,used in a CMOS image sensor,is proposed. In the design, the decrease of power consumption is achieved by applying low-power-consumption and large-output-swing amplifiers with gain boost structure, and biasing all the cells with the same voltage bias source, which requires careful layout design and large capacitors. In addition,capacitor array DAC is also applied to reduce power consumption,and low threshold voltage MOS transistors are used to achieve a large signal processing range. The ADC was implemented in a 0.18μm 4M-1 P CMOS process,and the experimental results indicate that it consumes only 7mW, which is much less than general pipeline ADCs. The ADC was used in a 300000 pixels CMOS image sensor.展开更多
this paper analyzes application status of tourism e-commerce in China and the Existing problems, points out that the construction of tourism e-commerce platform is an important part of the development of tourism elect...this paper analyzes application status of tourism e-commerce in China and the Existing problems, points out that the construction of tourism e-commerce platform is an important part of the development of tourism electronic commerce. The implementation of all business systems of various tourism enterprise data integration and information integration, the travel industry, all kinds of information resources for collaborative centralized management. By connecting the information management system of scattered all corporate travel value chain, realize the unified operation in the tourism e-commerce platform, improve the exchange of information and online transaction speed. According to our country＇ s tourism status and characteristics, from the feasibility analysis, function analysis, performance analysis and service oriented thought, this paper analyzes the system architecture of and data flow diagrams, system flow chart, PAD chart analysis of the system＇ s business processes. And it was analyzed and discussed briefly from the aspects of adaptability, functions, implementation strategy.展开更多
Let A be a von Neumann algebra with no central abelian projections. It is proved that if an additive map δ :A → A satisfies δ([[a, b], c]) = [[δ(a), b], c] + [[a, δ(b)], c] +[[a, b], δ(c)] for any a, b, c∈ A wi...Let A be a von Neumann algebra with no central abelian projections. It is proved that if an additive map δ :A → A satisfies δ([[a, b], c]) = [[δ(a), b], c] + [[a, δ(b)], c] +[[a, b], δ(c)] for any a, b, c∈ A with ab = 0(resp. ab = P, where P is a fixed nontrivial projection in A), then there exist an additive derivation d from A into itself and an additive map f :A → ZA vanishing at every second commutator [[a, b], c] with ab = 0(resp.ab = P) such that δ(a) = d(a) + f(a) for any a∈ A.展开更多
High-pressure ratio and wide operating range are highly required for compressors and blowers. The technical issue of the design is achievement of suppression of flow separation at small flow rate without deteriorating...High-pressure ratio and wide operating range are highly required for compressors and blowers. The technical issue of the design is achievement of suppression of flow separation at small flow rate without deteriorating the efficiency at design flow rate. A numerical simulation is very effective in design procedure, however, cost of the numerical simulation is generally high during the practical design process, and it is difficult to confn＇m the optimal design which is combined with many parameters. A multi-objective optimization technique is the idea that has been proposed for solving the problem in practical design process. In this study, a Low Solidity circular cascade Diffuser （LSD） in a centrifugal blower is successfully designed by means of multi-objective optimization technique. An optimization code with a meta-model assisted evolutionary algorithm is used with a commercial CFD code ANSYS-CFX. The optimization is aiming at improving the static pressure coefficient at design point and at low flow rate condition while constraining the slope of the lift coefficient curve. Moreover, a small tip clearance of the LSD blade was applied in order to activate and to stabilize the secondary flow effect at small flow rate condition. The optimized LSD blade has an extended operating range of 114 % towards smaller flow rate as compared to the baseline design without deteriorating the diffuser pressure recovery at design point. The diffuser pressure rise and operating flow range of the optimized LSD blade are experimentally verified by overall performance test. The detailed flow in the diffuser is also confirmed by means of a Particle Image Velocimeter. Secondary flow is clearly captured by PIV and it spreads to the whole area of LSD blade pitch. It is found that the optimized LSD blade shows good improvement of the blade loading in the whole operating range, while at small flow rate the flow separation on the LSD blade has been successfully suppressed by the secondary flow effect.展开更多
Classical transonic hodograph-based design methods are employed and revitalized using modern numerical tools to illustrate the design of a symmetrical accelerating-decelerating nozzle throat design. The concept of Ell...Classical transonic hodograph-based design methods are employed and revitalized using modern numerical tools to illustrate the design of a symmetrical accelerating-decelerating nozzle throat design. The concept of Elliptic Continuation is applied to solve transonic boundary value problems avoiding the inherently nonlinear nature of the basic equations and obtaining transonic flow examples using the Method of Characteristics in an inverse mode. Purpose of the present paper, besides describing a new special flow example, is to keep these classical methods alive for education of a new generation of creative engineers.展开更多
文摘A low-power-consumption 9bit 10MS/s pipeline ADC,used in a CMOS image sensor,is proposed. In the design, the decrease of power consumption is achieved by applying low-power-consumption and large-output-swing amplifiers with gain boost structure, and biasing all the cells with the same voltage bias source, which requires careful layout design and large capacitors. In addition,capacitor array DAC is also applied to reduce power consumption,and low threshold voltage MOS transistors are used to achieve a large signal processing range. The ADC was implemented in a 0.18μm 4M-1 P CMOS process,and the experimental results indicate that it consumes only 7mW, which is much less than general pipeline ADCs. The ADC was used in a 300000 pixels CMOS image sensor.
文摘this paper analyzes application status of tourism e-commerce in China and the Existing problems, points out that the construction of tourism e-commerce platform is an important part of the development of tourism electronic commerce. The implementation of all business systems of various tourism enterprise data integration and information integration, the travel industry, all kinds of information resources for collaborative centralized management. By connecting the information management system of scattered all corporate travel value chain, realize the unified operation in the tourism e-commerce platform, improve the exchange of information and online transaction speed. According to our country＇ s tourism status and characteristics, from the feasibility analysis, function analysis, performance analysis and service oriented thought, this paper analyzes the system architecture of and data flow diagrams, system flow chart, PAD chart analysis of the system＇ s business processes. And it was analyzed and discussed briefly from the aspects of adaptability, functions, implementation strategy.
基金supported by the National Natural Science Foundation of China(No.11401452)the China Postdoctoral Science Foundation(No.2015M581513)
文摘Let A be a von Neumann algebra with no central abelian projections. It is proved that if an additive map δ :A → A satisfies δ([[a, b], c]) = [[δ(a), b], c] + [[a, δ(b)], c] +[[a, b], δ(c)] for any a, b, c∈ A with ab = 0(resp. ab = P, where P is a fixed nontrivial projection in A), then there exist an additive derivation d from A into itself and an additive map f :A → ZA vanishing at every second commutator [[a, b], c] with ab = 0(resp.ab = P) such that δ(a) = d(a) + f(a) for any a∈ A.
基金financially supported by Japan Society for the Promotion of Science(JSPS) program of"Strategic young researcher overseas visits program for accelerating brain circulation"
文摘High-pressure ratio and wide operating range are highly required for compressors and blowers. The technical issue of the design is achievement of suppression of flow separation at small flow rate without deteriorating the efficiency at design flow rate. A numerical simulation is very effective in design procedure, however, cost of the numerical simulation is generally high during the practical design process, and it is difficult to confn＇m the optimal design which is combined with many parameters. A multi-objective optimization technique is the idea that has been proposed for solving the problem in practical design process. In this study, a Low Solidity circular cascade Diffuser （LSD） in a centrifugal blower is successfully designed by means of multi-objective optimization technique. An optimization code with a meta-model assisted evolutionary algorithm is used with a commercial CFD code ANSYS-CFX. The optimization is aiming at improving the static pressure coefficient at design point and at low flow rate condition while constraining the slope of the lift coefficient curve. Moreover, a small tip clearance of the LSD blade was applied in order to activate and to stabilize the secondary flow effect at small flow rate condition. The optimized LSD blade has an extended operating range of 114 % towards smaller flow rate as compared to the baseline design without deteriorating the diffuser pressure recovery at design point. The diffuser pressure rise and operating flow range of the optimized LSD blade are experimentally verified by overall performance test. The detailed flow in the diffuser is also confirmed by means of a Particle Image Velocimeter. Secondary flow is clearly captured by PIV and it spreads to the whole area of LSD blade pitch. It is found that the optimized LSD blade shows good improvement of the blade loading in the whole operating range, while at small flow rate the flow separation on the LSD blade has been successfully suppressed by the secondary flow effect.
基金supported by the Grant Agency of the Czech Technical University in Prague, grant no. SGS13/180/OHK2/3T/12Support from the project No. CZ.2.16/3.1.00/21569 Centre 3D Volumetric Anemometry
文摘Classical transonic hodograph-based design methods are employed and revitalized using modern numerical tools to illustrate the design of a symmetrical accelerating-decelerating nozzle throat design. The concept of Elliptic Continuation is applied to solve transonic boundary value problems avoiding the inherently nonlinear nature of the basic equations and obtaining transonic flow examples using the Method of Characteristics in an inverse mode. Purpose of the present paper, besides describing a new special flow example, is to keep these classical methods alive for education of a new generation of creative engineers.
