试析“侯景何以能乱梁”

梁武帝太清二年(548),降将侯景叛变梁朝,最终导致了萧衍梁政权的颠覆。侯景能够成功乱梁内在的原因是梁朝本身腐败统治发展的恶果,而南北政局相互作用则是推动其发展的外部原因。

Scheduling method for single-arm cluster tools of wafer fabrications with residency and continuous reentrancy

In order to enhance the utilization of single-ann cluster tools and optimize the scheduling problems of dynamic reaching wafers with residency time and continuous reentrancy constraints, a structural heuristic scheduling algorithm is presented. A nonlinear programming scheduling model is built on the basis of bounding the scheduling problem domain. A feasible path search scheduling method of single-arm robotic operations is put forward with the objective of minimal makespan. Finally, simulation experiments are designed to analyze the scheduling algorithms. Results indicate that the proposed algorithm is feasible and valid to solve the scheduling problems of multiple wafer types and single-ann clusters with the conflicts and deadlocks generated by residency time and continuous reentrancy constraints.

Effects of Facilities Condition on Occurrence of Freeze Injury and Fresh Pod Yield of Broad Bean

Using Tongxian No.2 as material, the effects of different film-covering time, different sowing time and different planting density on the occurrence of freeze injury and yield of fresh broad beans were investigated. The randomized block design was adopted. The results showed that with the delayed film covering, the incidence of mild freeze injury and number of headless seedlings were increased correspondingly, but the yield was increased; with the delayed sowing, the branch number per plant, effective branch number per plant, incidence of mild freeze injury and number of headless seedlings were all reduced, and the broad beans, sowed on September 30 th, obtained the highest yield; planting density showed on effect on the occurrence of freeze injury, and the yield was increased with the increase of planting density. Under the same film-covering time, the incidence of freeze injury was reduced with the delayed sowing time and it showed no changes when planting density was changed, but the yield was increased with the increase of planting density and it was highest when broad bean seeds were sowed on September 30th;under the same sowing time, the incidence of freeze injury was increased with the delayed film-covering time and it showed no changes when planting density was changed, and the yield was increased with the delayed film-covering time and increased planting density; under the same planting density, the incidence of freeze injury was increased with the delayed film-covering time but was reduced with the delayed sowing time, and the yield was increased with the delayed film-covering time and it was highest when the broad bean seeds were sowed on September30 th. Under same film-covering time and sowing time, the total branch number per plant and effective branch number per plant were reduced, but the yield was increased with the increase of planting density; under same film-covering time and planting density, the incidence of freeze injury was reduced with the delayed sowing time, and the yield was highest when broad bean seeds were sowed on September30th; under same sowing time and planting density, the incidence of freeze injury and the yield were all increased with the delayed film-covering time.

Spatial Planning and Designing for Campuses in the New Era

Current education system reform poses unprecedented opportunities for higher schools. The research proposed components and organization types for uni- versity/college spatial configuration based on campus spaces at home and abroad. In the background of sustainable design, the research took urban space design as references in order to explore effects of higher education theory on campus space design, analyze campus development trend and spatial configuration, as well as pro- vide references for massive urban university/college projects＂ construction and re-de- velopment.

Spatial structural analysis of main saddle for single tower spatial cable self-anchored suspension bridge

Based on the engineering background of the Jiangxinzhou Bridge in Nanjing, issues related to the spatial main saddle of the self-anchored suspension bridge are studied. The refinement finite element model is established by the secondary development technology based on the platform of the general finite element program, and a reasonable load pattern is used in its spatial structural analysis, by which its path of force transference and stress distribution are obtained. Matched with the spatial main cable, the tangency point correction method is also discussed. The results show that the lateral wall stress of the saddle groove is higher than the stress within the wall due to the role of lateral forces in the finished bridge state; the horizontal volume force of the main cable can generate a gradient distributed vertical extrusion pressure on the saddle clamping device and the main saddle body; the geometric nonlinear effect of the self- anchored suspension bridge cable system in the construction process is significant, which can be reflected in the spatial tangent point position of the main cable with the main saddle changes a lot from free cable to finished cable.

An Optimal Model for Carbon Sinks of CDM Project to Build a New Countryside Based on Cyclic Economy under Uncertainty

Based on the status and characteristics of Clean Development Mechanism （CDM） renewable energy project and the mode of cyclic economy, aimed at achieving the maximum capacity of carbon sinks in the system, Lvjin Jiayuan—New Countryside Distripark CDM project in Wuchuan County was taken as an example for developing an interval linear programming （ILP） model to optimize the crops planting scheme and cows breeding scheme by using interval optimal method. The case showed that the optimized crops planting scheme and cows breeding scheme obtained from the optimal model was reasonable with relatively preferable overall performance. In the context of meeting economic benefits and fertilizer, electricity demand, [231 287.8, 273 312.7] t of CO2 could be absorbed and fixed, which had increased by [12.94, 33.46]% compared with the feasibility scheme of case project and provided technical support for making the decision in CDM project.

Study on the Price Design and Contract Stability of "Company + Farmer" Model with Time Preference under Double Moral Hazards

The double moral hazard of ＂company ＋ farmer＂ and the time preference cost of company and farmer was analyzed. According to static game model, it re-vealed that the reason for low compliance rate of ＂company ＋ farmer＂ model was the existence of market risk, namely, the fluctuation of market price, and the stable market price in contracts was actualy a kind of interval, instead of a specific value. Furthermore, the effect of default penalty, market transaction cost and time prefer-ence cost on the stability of contract was studied. The results showed that default penalty, market transaction cost and time preference cost had positive influence on the price interval range of a contract.

Waterfront Spatial Design from the Perspective of Sponge City

Due to environmental awareness, demand for watercourse landscape eco- function is growing domestically. However, flood control and drainage are the only focuses, and the rest functions of water course are slighted. Besides, cross-section biodiversity is falling and wetland self-cleaning capacity is impairing, resulting from river limitation on riverbed, making a straight river bend and revetment. So, water course has to be managed from ecology, economy, culture and social effect, to re- store natural river function and meet human demands. And to return to nature and people first would be the general principles.

Roles and Functions of Tourism Destinations in Tourism Region of South Anhui:A Tourist Flow Network Perspective

Theoretic and practical significance has been highlighted in the research of the roles and functions of destinations,as destinations are restricted by the spatial structure based on tourist flow network from the perspective of relationship.This article conducted an empirical analysis for Tourism Region of South Anhui(TRSA) and revealed the necessity and feasibility of studying the roles and functions of destinations from tourist flow network's perspective.The automorphic equivalence analysis and centrality analysis were used to classify 16 destinations in TRSA into six role types:tourist flow distribution center,hub of tourist flows,passageway destination,common touring destination,attached touring destination,and nearly isolated destination.Some suggestions were given on suitable infrastructure construction and destinations service designs according to their functions in network.This destination role positioning was based on tourist flow network structure in integral and macroscopic way.It provided an important reference for the balanced and harmonious development of all the destinations of TRSA.In addition,this article verified the applicability of social network analysis on tourist flow research in local scale,and expanded this method to destination role and function positioning.

Spatial spillover effects of transport infrastructure on regional economic growth

Spatial spillover effects,either positive or negative,of transport infrastructure,highways/expressways,etc.,on regional economic growth are proposed.Using the panel data for 11 cities of Zhejiang province from 1994 to 2003,a spatial production function is applied to examine the spatial spillovers which can be generated as a positive output spillover from the transport infrastructure between neighboring cities.Some spatial weighted matrices are adopted to define different neighboring cities to measure how easily factors or economic activities can migrate between regions.The estimation results show that the output elasticity of the highway infrastructure in 11 cities are all insignificant at a 5% significance level;hence,highway infrastructure in a region cannot explain the same region's economic growth.On the other hand,the highway infrastructure of other contiguous regions has positive spillover effects on a same region's economic growth.

Scheduling a three-machine no-wait flowshop with separated setup time

In many practical flowshop production environments, there is no intermediate storage space available to keep partially completed jobs between any two machines. The workflow has to be continuous, implying that the no-wait conditions must be abided, which is typical in steel and plastic production. We discuss the three-machine no-wait flowshop scheduling problem where the setup times are considered as separated from processing times and sequence independent. The scheduling goal is to minimize the total flowtime. An optimal property and two heuristic algorithms for this problem are proposed. Evaluated over a large number of problems, the proposed heuristics are found that they can yield good solutions effectively with low computational complexity, and have more obvious advantage for the large size problem compared with the existing one.

Experimental study of destruction to porcine spleen in vivo by microwave ablation

AIM: To discuss the safety, feasibility and regularity of destruction to porcine spleen in vivo with congestion and tumescence by microwave ablation (MWA). METHODS: Ligation of the splenic vein was used to induce congestion and tumescence in vivo in five porcine spleens, and microwave ablation was performed 2-4 h later. A total of 56 ablation points were ablated and the ablation powers were 30-100 W. The ablation time (1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 min) was performed at a power of 60 W. After ablation, the ablation size was measured in pigs A, C, D and E and spleen resection. In pig B, the ablation size was measuredand 2 ablation points were sent for pathology analysis and all tissues were sutured following ablation. Pig B was killed 1 wk later and the ablation points were sent for pathology analysis. Bleeding, tissue carbonization surrounding electrodes, and pathological changes were observed, and the effect on destruction volume relative to different ablation powers, times and positions was analyzed. RESULTS: The incidence of bleeding (only small amounts, < 20 mL) in the course of ablation was 5.4% (3/56) and was attributed to tissue carbonization surrounding electrodes, which also exhibited an incidence of 5.4% (3/56). The destruction volume was influenced by different ablation powers, times and points. It showed that the ablation lesion size increased with increased ablation time, from 1 to 10 min, when the ablation power was 60 W. Also, the ablation lesion size increased with the increase of ablation power, ranging from 30 to 100 W when the ablation time was set to 3 min. A direct correlation was seen between the destruction volume and ablation time by the power of 60 W (r = 0.97542, P < 0.0001, and also between the destruction volume and ablation powers at an ablation time of 3 min (r = 0.98258, P < 0.0001). The destruction volume of zone Ⅱ (the extra-2/3 part of the spleen, relative to the fi rst or second class vascular branches), which was near the hilum of the spleen, was noteably larger than the destruction volume of zoneⅠ(the intra-1/3 part of the spleen) which was distal from the hilum of the spleen (P = 0.0015). Pathological changes of ablation occurring immediately and 1 wk after MWA showed large areas of coagulation. Immediately following ablation, intact spleen tissues were observed in the areas of coagulation necrosis, mainly around arterioles, and there were no obvious signs of hydropsia and inflammation, while 1 wk following the ablation, the coagulation necrosis was well distributed and complete, as many nuclear fragmentations were detected, and there were obvious signs of hydropsia and inflammation.CONCLUSION: In vivo treatment of congestion and tumescence in the spleen using microwave ablation of water-cooled antenna is a safe and feasible method that is minimally invasive.

Space Drive Propulsion Principle from the Aspect of Cosmology

This paper describes the propulsion principle using the concept of space drive and the pressure of the field induced by local rapid expansion of space based on the latest cosmology. Assuming that space vacuum is an infinite continuum, the propulsion principle utilizes the pressure field derived from the geometrical structure of space, by applying both continuum mechanics and general relativity to space. The propulsive force is a pressure thrust that arises from the interaction of space-time around the spaceship external environment and the spaceship itself; the spaceship is propelled by the pressure used against the space-time structure. As is well known in cosmology, the expansion rule of the universe is governed by the Friedman＇s equations and the Robertson-Walker metric. In this time, the propulsion principle of space drive is introduced from another angle （cosmology）, that is, the pressure of the field induced by local expansion of space is completely considered in the propulsion principle.

Spatial Process of Green Infrastructure Changes Associated with Rapid Urbanization in Shenzhen,China

Through a case study of Shenzhen City,China,this study focused on a quantitative method for analyzing the spatial processes involved in green infrastructure changes associated with rapid urbanization.Based on RS,GIS and SPSS statistics software,the approach includes selection of the square analysis units and representative landscape metrics,quantification of the change types of landscape metrics in all analysis units through two indices and hierarchical cluster analysis of the above analysis units with different landscape metric change types(i.e.spatial attributes).The analyses verify that there is a significant sequence of continuous changes in green infrastructure in Shenzhen.They are the perforation,the segmentation,the fragmentation,the evanescence and the filling-in processes,which have a good spatio-temporal correspondence with urbanization and reflect the synthetic influence of urban planning,government policies and landforms.Compared with other studies on quantifying the spatial pattern,this study provides an alternative probe into linking the spatial pattern to spatial processes and the corresponding ecological processes in the future.These spatio-temporal processes offer many opportunities for identifying,protecting and restoring key elements in an urban green infrastructure network for areas in the early stages of urbanization or for non-urbanized areas.

Achievement of Interference Alignment in General Underlay Cognitive Radio Networks: Scenario Classification and Adaptive Spectrum Sharing

Interference alignment(IA) is suitable for cognitive radio networks(CRNs).However, in IA spectrum sharing(SS) process of general underlay CRNs, transmit power of cognitive radio transmitters usually should be reduced to satisfy interference constraint of primary user(PU), which may lead to low signalto-noise-ratio at cognitive radio receivers(CRRs). Consequently, sum rate of cognitive users(CUs) may fall short of the theoretical maximum through IA. To solve this problem,we propose an adaptive IA SS method for general distributed multi-user multi-antenna CRNs. The relationship between interference and noise power at each CRR is analyzed according to channel state information, interference requirement of PU, and power budget of CUs. Based on the analysis, scenarios of the CRN are classified into 4 cases, and corresponding IA SS algorithms are properly designed. Transmit power adjustment, CU access control and adjusted spatial projection are used to realize IA among CUs. Compared with existing methods, the proposed method is more general because of breaking the restriction that CUs can only transmit on the idle sub-channels. Moreover, in comparison to other five IA SS methods applicable in general CRN, the proposed method leads to improved achievable sum rate of CUs while guarantees transmission of PU.

An Indoor Ubiquitous Computing Environment Based on Location-awareness

To provide the right services or information to the right users, at the right time and in the right place in ubiquitous computing environment, an Indoor Ubiquitous Computing Environment based on Location-Awareness, IUCELA, is presented in this paper. A general architecture of IUCELA is designed to connect multiple sensing devices with locationaware applications. Then the function of location-aware middleware which is the core componnet of the proposed architecture is elaborated. Finally an indoor forum is taken as an example scenario to demonstrate the security, usefulness, flexibiltity and robustness of IUCELA.

Robust PID controller design for time delay processes with peak of maximum sensitivity criteria

The motivation of this work is to obtain single PI/PID tuning formula for different types of processes with enhanced disturbance rejection performance. The proposed tuning formula consistently gives better performance in comparison to several well-known methods at the same degree of robustness for stable, integrating and unstable processes. For the selection of the closed-loop time constant(τc), a guideline is provided over a broad range of time-delay/time-constant ratios on the basis of the peak of maximum sensitivity(Ms). An analysis has been performed for the uncertainty margin with the different process parameters for the robust controller design. It gives the guideline of the Ms-value settings for the PI controller designs based on the process parameters uncertainty. Furthermore, a relationship has been developed between Ms-value and uncertainty margin with the different process parameters(k, τ and θ). Simulation study has been conducted for the broad class of processes and the controllers are tuned to have the same degree of robustness by measuring the maximum sensitivity, Ms, in order to obtain a reasonable comparison.

Color control of the multi-color printing device

Conventional color-printing systems often use inks of three hues, such as CMY, CMYK and CMYKLcLm, but in order to obtain more realistic color reproductions, the ink set of more than three hues has been adopted by some color-printing systems. It is difficult, however, to model the composed color with the multiple inks when the number of the output ink hues exceeds three due to the none-unique mapping between the color spaces of the CIE Lab and the multi-color printing device. In this paper, we propose a fine color-printing method for multi-color printing device with the ink set of more than three hues. The proposed approach has good color expression ability and provides fine control of the printed color. By dividing the output color space into several subspaces, our method allows one-to-one mapping between the standard color space and the multi-color output color space. It has been proved effective when applied to the digital inkjet printer—Mutoh8000.

Continuum Mechanics of Space Seen from the Aspect of General Relativity An Interpretation of the Gravity Mechanism

A mechanical structure of space is suggested. On the supposition that a space as vacuum has a physical fine structure like continuum, it enables us to apply a continuum mechanics to the so-called ＂vacuum＂ of space. A space is an infinite continuum and its structure is determined by Riemannian geometry. Assuming that space is an infmite continuum, the pressure field derived from the geometrical structure of space is newly obtained by applying both continuum mechanics and General Relativity to space. A fundamental concept of space-time is described that focuses on theoretically innate properties of space including strain and curvature. As a trial consideration, gravity can be explained as a pressure field induced by the curvature of space.

SPATIAL GRADIENT ANALYSIS OF URBAN GREEN SPACES COMBINED WITH LANDSCAPE METRICS IN JINAN CITY OF CHINA

Urban green spaces have been arisen growing concern responded to the social and environmental costs of urban sprawl. A wide range of planning and policies has been and/or will be designed to protect urban green spaces and optimize their spatial pattern. A better design or planning of urban green space can make a major contribution to quality of environment and urban life, and furthermore can decide whether we can have a sustainable development in the urban area. Information about the status quo of urban green spaces can help planners design more effectively. However, how to quantify and capture such information will be the essential question we face. In this paper, to quantify the urban green space, a new method comprising gradient analysis, landscape metrics and GIS was developed through a case of Jinan City. The results demonstrate: 1) the gradient analysis is a valid and reliable instrument to quantify the urban green space spatial pattern precisely; 2) using moving window, explicit landscape metrics were spatially realized. Compared with quantifying metrics in the entire landscape, it would be better to link pattern with process and establish an important basis for analyzing the ecological and socioeconomic functions of green spaces.