建筑优秀作品也需“二度品评”的研究与思考——为“中设协建筑设计分会2015行业奖学术交流会”所作

2016年2月6日叶中共中央国务院关于进一步加强城市规划建设管理工作的若干意见曳发布,在30条意见条款第一条便提出贯彻"创新、协调、绿色、开放、共享"五大发展理念的"适用、经济、绿色、美观"的八字新建筑方针,无疑这成为发展中国当代建筑设计的理论指南。本文针对"2015年度中国建筑设计行业奖"的学术研讨,从为完善并提升评选目标出发予以理性自审与自省,期望在不断推出中国好建筑的进程中,在把控住评选方向、引导评选品质、增加国内外传播渠道等方面有所突破。因此,特别提出评选与后品评的"二度"思维与发展中国建筑评论等一系列建议。

初中英语教材的二度评价和建议

我国很多学者对英语教材进行了评价研究,但是评价主体主要是教育行政人员和教师,评价主体是学生的研究比较少。为了全面评价教材,本文通过调查问卷和面谈等研究方法从教师和学生两个维度对现行初中英语教材（外语教学与研究出版社）进行评价。在教师评价中,从整体和部分两个方面对教材的优点和缺点进行评价。最后把教师和学生的观点进行比较,找出异同,提出教材改进的建议。

Environmental life cycle assessment of Indian coal-fired power plants

Coal is the backbone of the Indian power sector. The coal-fired power plants remain the largest emitters of carbon dioxide, sulfur dioxide and substantial amounts of nitrogen oxides, which are associated with climate and health impacts. Various CO2 mitigation technologies （carbon capture and storage--CCS） and SO2/NOx mitigation technologies （flue gas desulfurization and selective catalytic reduction） have been employed to reduce the environmental impacts of the coal-fired power plants. Therefore, it is imperative to understand the feasibility of various mitigation technologies employed. This paper attempts to perform environmental life cycle assessment （LCA） of Indian coal-fired power plant with and without CO2, SO2 and NOx mitigation controls. The study develops new normalization factors for India in various damage categories, using the Indian emissions and energy consumption data, coupled with the emissions and particulate emission to come up with a final environmental impact of coal-fired electricity. The results show a large degree of dependence on the perspective of assessment used. The impact of sensitivities of individual substances and the effect of plant efficiency on the final LCA results is also studied.

Experimental assessment of a plasma-catalyst hybrid reformer for hydrogen production via partial oxidation of dimethyl ether

In this work,hydrogen is produced from partial oxidation reforming of dimethyl ether （DME） by a plasma-catalyst hybrid reformer under atmospheric pressure.The plasma-catalyst hybrid reformer which includes both plasma and catalyst reactors is designed.A spark discharge is used as a non-equilibrium plasma source,and it is used to ionize the mixture of DME and air.The performances of the reformer are characterized experimentally in terms of gas concentrations,hydrogen yield,DME conversion ratio,and specific energy consumption.The effects of discharge frequency,reaction temperature,air-to-DME ratio and space velocity are investigated.The experimental results show that the plasma-catalyst hybrid reformer enhances hydrogen yield when reaction temperature drops below 620 ℃.At 450 ℃,hydrogen yield of hybrid reforming is almost three times that of catalyst reforming.When space velocity is 510 h-1,hydrogen yield is 67.7%,and specific energy consumption is 12.2 k J/L-H2.

Evaluation the Effect of Diurnal Temperature Fluctuations on Seed Germination of Pistacia vera L.

This experiment was carried out in order to investigate the effect of diurnal temperature fluctuations on seed germination of Pistacia vera L. The seeds of Badami-e-Zarand and Sarakhs cultivars were treated with the following temperatures： T1 = 24 hr at 25℃, T2= 16 hr at 25 ℃ ＋ 8 hr at 10 ℃, T3= 12 hr at 25 ℃ ＋ 12 hr at 10℃ and T4= 8 hr at 25℃ ＋ 16 hr at 10℃. The germination percentage was increased by diurnal temperature fluctuations, however all of treatments extended MTG compared to control （T1）. Temperature affected the quality of roots, in a matter that high constant temperature resulted in dichotomous （forked） roots during seed germination of pistachio. The response of cultivars was different in this case, so that, Badami-e-Zarand had higher dichotomous root percentage. This disorder can be decreased by diurnal temperature fluctuation.

Evaluation of Heat and Current Characteristics of Bypass Diodes for Fault Detection in Photovoltaic Module

In recent years, PV （photovoltaic） systems have been installed rapidly around the world. However, there is often a delay in the practical application of fault detection in PV systems. In this study, the temperature of BD （bypass diodes） mounted on PV modules was measured for simple and practical fault detection. The temperature of the BD of Module 31 was higher than other modules and a large current passed through one of the BDs. Measuring BD temperatures is easier than other conventional methods of fault detection. From the results of the rise in BD temperature under dark conditions, the increase in temperature increased linearly with increasing current flow. There is a proportional relationship between heat generated and the increasing temperature of the terminal box. The experimental results about surface temperature of the junction box in actual system operation suggested that the electric current through a BD in a terminal box can be known by measuring the surface temperature of the terminal box for PV module fault detection without a system shutdown. Moreover, we tried to evaluate temperature distribution of a terminal box using heat conduction equations. The evaluated results agreed well with the measured results.

Urban Air Quality Assessment of Kathmandu by Passive Sampling Technique

This paper presents an assessment of air quality of the Kathmandu valley, capital city of Nepal. This is the largest urbanized area in the country of about 300 km2. In the last two decades an intensive development of demographic, traffic and industry growth in the region was observed which was reflected on the air quality degradation. In order to evaluate the urban air quality in Kathmandu, a field monitoring network for particle deposition, nitrogen dioxide （NO2） and sulphur dioxide （SO2） by passive sampling with high space resolution was implemented in co-operation with IVL-Sweden. The net work composed of 60 monitoring sites distributed in a grid of 1 × 1 km2 covering all over the main city and some rural valley. Monitoring were carried out for two seasons, rainy and dry as two campaign monitoring. The diffusive samplers were prepared and analyzed in IVL, Sweden. Good agreements in particle deposition between the two campaigns were observed. The particle deposition to the surrogate surface varied between 3 and 608 μg@cm2·monthl for the monitoring periods. The NOz concentrations on the other hand were quite similar in the two campaigns, and the SO2 concentrations were much lower in the first campaign compared to the second. The ranges of NO2 and SO2 concentrations were found to be from 5.6 to 52.6 μg/m3 and 0.6 to 23.4 μg·m-3 respectively. Arc Info/Arc map GIS 9.2 software was used for production of maps of spatial distribution of all the three parameters in the valley. Seasonal variation and traffic influence were also studied. Local meteorological effects in the distribution of pollutants were clearly observed and the NO2 concentrations were strictly related with traffic intensity.

Numerical Modeling of the Solidification Phase Change in a Pipe and Evaluation of the Effect of Boundary Conditions

A numerical solution to a two-dimensional model of flow and transient heat transfer involving solidification in a pipe has been established.Where the temperature of pipe wall is below the freezing point of fluid,phase change of flowing fluid and the influence of different boundary condition,such as pipe wall temperature,initial temperature and inlet velocity has been taken into account.Also it has been investigated to elicit proper non-dimensional numbers to show the solidification proceeding results.Additionally comparing the two acceptable inlet conditions,show distinctions between velocity inlet and pressure inlet boundary condition in such problems,which affect the whole freezing process.

Preparation of a mesoporous sorption complex catalyst and its evaluation in reactive sorption enhanced reforming

A mesoporous sorption complex catalyst was prepared by pore-forming modification and evaluated by the COz reactive sorption enhanced reforming （ReSER） process, which is used to produce hydrogen from methane. Three samples of polyethylene glycol （PEG） with molecular weights between 2000 and 20 000 were added as templates into a mixed slurry to create catalysts with different pore properties by further formation and calcination. The pore characteristics determined by Brunauer- Emmett-Teller （BET） analysis showed that one of the mesoporous catalysts, named M-NiAICa-6000, had a pore size of 9.2 nm and a surface area of 70.52 m2/g and the CO2 sorption capacity of this catalyst was 44% higher than that of the catalyst without the PEG 6000 modification. The catalyst was evaluated in the ReSER process in a fixed-bed reactor system at 0.1 MPa and 600 C with an H20/CH4 molar ratio of 4. An H2 concentration of 94.2% and a CH4 conversion of 86.0% were obtained at a carbon space velocity of 1700 h 1 while CO2 was hardly detected.