Concrete in reinforced concrete structure (RC) is generally under significant compressive stress load. To guarantee required quality and ductility, various tests have to be conducted to measure the concrete’s compres...Concrete in reinforced concrete structure (RC) is generally under significant compressive stress load. To guarantee required quality and ductility, various tests have to be conducted to measure the concrete’s compressive strength based on ACI (American Concrete Institute) code. Investigations of recent devastating collapses of structures around the world showed that some of the collapses directly resulted from the poor quality of the concrete. The lesson learned from these tragedies is that guaranteeing high quality of concrete is one of the most important factors ensuring the safety of the reinforced concrete structure. In order to ensure high quality of concrete, a new method for analyzing and evaluating the concrete production process is called for. In this paper, the indices of fit and stable degree are proposed as basis to evaluate the fitness and stability of concrete’s compressive strength. These two indices are combined to define and evaluate the quality index of the compressive strength of concrete. Prin-ciples of statistics are used to derive the best estimators of these indices. Based on the outcome of the study, a concrete compres-sive strength quality control chart is proposed as a tool to help the evaluation process. Finally, a new evaluation procedure to assess the quality control capability of the individual concrete manufacturer is also proposed.展开更多
The hourly and daily air quality concentration in the total air pollutant emission amount control zone is not sure to be continuously up to national ambient air quality standard, even though the total annual air pollu...The hourly and daily air quality concentration in the total air pollutant emission amount control zone is not sure to be continuously up to national ambient air quality standard, even though the total annual air pollutant emission is permitted under the total air pollutant emission amount control (TAPEAC) on the basis of A-value method. So the concept of the environmental quality guarantee ratio (EQGR) for TAPEAC is advanced in this paper and its quantitative formula is figured out for both hourly and daily EQGR. It is concluded that the EQGR is related with the yearly arrangement of A-value besides the pollutant type. According to the meteorological data in a lower area along Yangtze River in 2000, the yearly A-value trend is analyzed. Based on the data, the hourly EQGR of SO 2 and NO 2 is respectively 97.4% and 90.2%, and daily EQGR respectively 90.2% and 79.5%.展开更多
Based on advanced computer technology, internet of things （lOT） technology, project management con- cept and professional technology and combined with the innovative theories, methods and techniques in earlier hy- d...Based on advanced computer technology, internet of things （lOT） technology, project management con- cept and professional technology and combined with the innovative theories, methods and techniques in earlier hy- dropower projects, the life-cycle risk management system of high earth-rock dam project for Nuozhadu project was developed. The system mainly includes digital dam, three-dimensional design, construction quality monito- ring, safety assessment and warning, etc, to integrally manage and analyze the dam design, constructional quality and safety monitoring information. It realized the dynamic updates of the comprehensive information and the safe- ty quality monitoring in the project life cycle, and provided the basic platform for the scientific management of the construction and operation safety of high earth-rock dam. Application in Nuozhadu earth-rock dam showed that construction safety monitoring and warning greatly helped accelerate the construction progress and improve project quality, and provided a new way for the quality safety control of high earth-rock dam.展开更多
Sequential chemical extraction procedure has been widely used to partition particulate trace metals into various fractions and to describe the distribution and the statue of trace metals in geo environment. One sequen...Sequential chemical extraction procedure has been widely used to partition particulate trace metals into various fractions and to describe the distribution and the statue of trace metals in geo environment. One sequential chemical extraction procedure was employed here to partition various fractions of Mn in soils. The experiment was designed with quality controlling concept in order to show sampling and analytical error. Experimental results obtained on duplicate analysis of all soil samples demonstrated that the precision was less than 10%(at 95%confidence level). The accuracy was estimated by comparing the accepted total concentration of Mn in standard reference materials (SRMs) with the measured sum of the individual fractions. The recovery of Mn from SRM1 and SRM2 was 94.1%and 98.4%, respectively. The detection limit, accuracy and precision of the sequential chemical extraction procedure were discussed in detailed. All the results suggest that the trueness of the analytical method is satisfactory.展开更多
为满足新型低温预混合燃烧柴油机燃烧模式切换时的瞬态轨压控制的要求,在结合传统PID控制算法的基础上,提出了一种基于模型的共轨轨压控制结构。通过建立包括轨道、喷油器、高压泵和ECU(engine control unit)驱动特性的共轨系统的前馈...为满足新型低温预混合燃烧柴油机燃烧模式切换时的瞬态轨压控制的要求,在结合传统PID控制算法的基础上,提出了一种基于模型的共轨轨压控制结构。通过建立包括轨道、喷油器、高压泵和ECU(engine control unit)驱动特性的共轨系统的前馈物理模型,配合燃油泄漏补偿模块,并应用控制质量评估和切换策略,使得该方法不仅结合了传统PID算法稳定可靠的优点,还具有响应快、不超调以及标定简单等新特点。实验结果表明:该控制算法明显改善了瞬态过程中的轨压控制精度并能保证控制系统在实际应用中安全稳定的要求。目前该算法已应用于中国新一代低温预混合燃烧柴油机产品样机的开发。展开更多
基金Project (No. NSC92-2213-e-167-001) supported by the National Science Council, Taiwan, China
文摘Concrete in reinforced concrete structure (RC) is generally under significant compressive stress load. To guarantee required quality and ductility, various tests have to be conducted to measure the concrete’s compressive strength based on ACI (American Concrete Institute) code. Investigations of recent devastating collapses of structures around the world showed that some of the collapses directly resulted from the poor quality of the concrete. The lesson learned from these tragedies is that guaranteeing high quality of concrete is one of the most important factors ensuring the safety of the reinforced concrete structure. In order to ensure high quality of concrete, a new method for analyzing and evaluating the concrete production process is called for. In this paper, the indices of fit and stable degree are proposed as basis to evaluate the fitness and stability of concrete’s compressive strength. These two indices are combined to define and evaluate the quality index of the compressive strength of concrete. Prin-ciples of statistics are used to derive the best estimators of these indices. Based on the outcome of the study, a concrete compres-sive strength quality control chart is proposed as a tool to help the evaluation process. Finally, a new evaluation procedure to assess the quality control capability of the individual concrete manufacturer is also proposed.
文摘The hourly and daily air quality concentration in the total air pollutant emission amount control zone is not sure to be continuously up to national ambient air quality standard, even though the total annual air pollutant emission is permitted under the total air pollutant emission amount control (TAPEAC) on the basis of A-value method. So the concept of the environmental quality guarantee ratio (EQGR) for TAPEAC is advanced in this paper and its quantitative formula is figured out for both hourly and daily EQGR. It is concluded that the EQGR is related with the yearly arrangement of A-value besides the pollutant type. According to the meteorological data in a lower area along Yangtze River in 2000, the yearly A-value trend is analyzed. Based on the data, the hourly EQGR of SO 2 and NO 2 is respectively 97.4% and 90.2%, and daily EQGR respectively 90.2% and 79.5%.
文摘Based on advanced computer technology, internet of things （lOT） technology, project management con- cept and professional technology and combined with the innovative theories, methods and techniques in earlier hy- dropower projects, the life-cycle risk management system of high earth-rock dam project for Nuozhadu project was developed. The system mainly includes digital dam, three-dimensional design, construction quality monito- ring, safety assessment and warning, etc, to integrally manage and analyze the dam design, constructional quality and safety monitoring information. It realized the dynamic updates of the comprehensive information and the safe- ty quality monitoring in the project life cycle, and provided the basic platform for the scientific management of the construction and operation safety of high earth-rock dam. Application in Nuozhadu earth-rock dam showed that construction safety monitoring and warning greatly helped accelerate the construction progress and improve project quality, and provided a new way for the quality safety control of high earth-rock dam.
文摘Sequential chemical extraction procedure has been widely used to partition particulate trace metals into various fractions and to describe the distribution and the statue of trace metals in geo environment. One sequential chemical extraction procedure was employed here to partition various fractions of Mn in soils. The experiment was designed with quality controlling concept in order to show sampling and analytical error. Experimental results obtained on duplicate analysis of all soil samples demonstrated that the precision was less than 10%(at 95%confidence level). The accuracy was estimated by comparing the accepted total concentration of Mn in standard reference materials (SRMs) with the measured sum of the individual fractions. The recovery of Mn from SRM1 and SRM2 was 94.1%and 98.4%, respectively. The detection limit, accuracy and precision of the sequential chemical extraction procedure were discussed in detailed. All the results suggest that the trueness of the analytical method is satisfactory.
文摘为满足新型低温预混合燃烧柴油机燃烧模式切换时的瞬态轨压控制的要求,在结合传统PID控制算法的基础上,提出了一种基于模型的共轨轨压控制结构。通过建立包括轨道、喷油器、高压泵和ECU(engine control unit)驱动特性的共轨系统的前馈物理模型,配合燃油泄漏补偿模块,并应用控制质量评估和切换策略,使得该方法不仅结合了传统PID算法稳定可靠的优点,还具有响应快、不超调以及标定简单等新特点。实验结果表明:该控制算法明显改善了瞬态过程中的轨压控制精度并能保证控制系统在实际应用中安全稳定的要求。目前该算法已应用于中国新一代低温预混合燃烧柴油机产品样机的开发。
