Based on the safety coefficient method,which assigns rock failure criteria to calculate the rock mass unit,the safety coefficient contour of surrounding rock is plotted to judge the distribution form of the fractured ...Based on the safety coefficient method,which assigns rock failure criteria to calculate the rock mass unit,the safety coefficient contour of surrounding rock is plotted to judge the distribution form of the fractured zone in the roadway.This will provide the basis numerical simulation to calculate the surrounding rock fractured zone in a roadway.Using the single factor and multi-factor orthogonal test method,the evolution law of roadway surrounding rock displacements,plastic zone and stress distribution under different conditions is studied.It reveals the roadway surrounding rock burst evolution process,and obtains five kinds of failure modes in deep soft rock roadway.Using the fuzzy mathematics clustering analysis method,the deep soft surrounding rock failure model in Zhujixi mine can be classified and patterns recognized.Compared to the identification results and the results detected by geological radar of surrounding rock loose circle,the reliability of the results of the pattern recognition is verified and lays the foundations for the support design of deep soft rock roadways.展开更多
In this paper, on the basis of the implementation of the national chemical industry standard analytical test methods and analysis of test items, a food additive quality analysis and inspection of network management ap...In this paper, on the basis of the implementation of the national chemical industry standard analytical test methods and analysis of test items, a food additive quality analysis and inspection of network management applications are developed using the development technology of Visual Basic language and computer system operating environment, to achieve a network management software for users on food additives of quality analytical testing. The software sets up an information sharing network platform for enterprise and quality management departments, which is a major innovation in the food additive quality analysis on test management methods and tools.展开更多
A data processing method was proposed for eliminating the end restraint in triaxial tests of soil. A digital image processing method was used to calculate the local deformations and local stresses for any region on th...A data processing method was proposed for eliminating the end restraint in triaxial tests of soil. A digital image processing method was used to calculate the local deformations and local stresses for any region on the surface of triaxial soil specimens. The principle and implementation of this digital image processing method were introduced as well as the calculation method for local mechanical properties of soil specimens. Comparisons were made between the test results calculated by the data from both the entire specimen and local regions, and it was found that the deformations were more uniform in the middle region compared with the entire specimen. In order to quantify the nonuniform characteristic of deformation, the non-uniformity coefficients of strain were defined and calculated. Traditional and end-lubricated triaxial tests were conducted under the same condition to investigate the effects of using local region data for deformation calculation on eliminating the end restraint of specimens. After the statistical analysis of all test results, it was concluded that for the tested soil specimen with the size of 39.1 mm × 80 ram, the utilization of the middle 35 mm region of traditional specimens in data processing had a better effect on eliminating end restraint compared with end lubrication. Furthermore, the local data analysis in this paper was validated through the comparisons with the test results from other researchers.展开更多
The performance of a digging shovel mainly depends on the style of the shovel, while the conventional experiment methods always suffer from the problems of high lost and long period. Aiming at these problems and the c...The performance of a digging shovel mainly depends on the style of the shovel, while the conventional experiment methods always suffer from the problems of high lost and long period. Aiming at these problems and the characteristic that soil is composed of countless small particles, dynamic simulation analysis was performed on the resistance to a bionic digging shovel and crushing rate of the soil during the normal working process of the bionic digging shovel by EDEM through numerical simulation, calculation and comparison. The results showed that compared with the ordinary shovel, the average drag-reducing rate in the X direction was 10.41%, and the average drag-reducing rate in the Y direction was 16.28%, and the soil crushing rate was improved by 2.67%. Therefore, the bionic digging shovel has certain superiority and extension value in structure and performance. Moreover, this analysis case fully demonstrates the unique advantage of DEM method and its generalizability, and provides certain reference for similar studies.展开更多
In this paper, a pilling segmentation method was introduced for objective pilling evaluation. Traditionally, image data collected are photo-sensitive which suffered seriously from the light reflectivity from surface a...In this paper, a pilling segmentation method was introduced for objective pilling evaluation. Traditionally, image data collected are photo-sensitive which suffered seriously from the light reflectivity from surface and color patterns on fabrics. The data used in the article were surface profile in gray level format. In this study, the background approximation by wavelet analysis approach was introduced. The original image was orthogonally decomposed and represented by sets of wavelet coefficients. The approximation coefficients were extracted at various levels and reconstructed to form a background. The results demonstrated a very effective segmentation in all tested fabrics.展开更多
The hypothesis in drug clinical trials is that the drug is better than a placebo in patients suffering from a disease. The unstated assumption is that the drug cures the disease or is a powerful treatment for the dise...The hypothesis in drug clinical trials is that the drug is better than a placebo in patients suffering from a disease. The unstated assumption is that the drug cures the disease or is a powerful treatment for the disease. This is an incorrect assumption. Drugs do not cure or treat diseases. The body heals itself; drugs promote this ability of the body to heal itself. Placebos are assumed to be inactive; however, placebos can also promote the ability of the body to heal itself. Placebos are actually treatments that can stimulate endogenous healing mechanisms. The possible place of placebos in health management is controversial. Clinical trial design should be altered. The hypothesis of clinical trials should be that the drug speeds up or improves the healing of the patient, putting patient healing as the first objective. Placebos should not be used as controls but could be tested as drugs in their own right. The control in clinical trials should be no treatment. Alternatively, new drugs could be compared to existing drugs in clinical trials.展开更多
Steel plates are widely used in various structures, such as the deck and bodies of ships and bridges, and in the aerospace industry. In many instances, these plates are subjected to axial compression loads that predis...Steel plates are widely used in various structures, such as the deck and bodies of ships and bridges, and in the aerospace industry. In many instances, these plates are subjected to axial compression loads that predispose the sheets to instability and buckling. In this study, we investigate the buckling and post-buckling behaviors of steel plates having groove-shaped cutouts of various dimensions and angles using finite element method (FEM) (by ABAQUS software) and experimental tests (by an Instron servohydraulic machine). Boundary conditions were clamped by supports at upper and lower ends and free supports at the other edges. The results of both numerical and experimental analyses are compared, which show a very good agreement between them. Finally, based on the experimental findings, formulas are presented for the determination of the buckling load of such plates.展开更多
A method for static aeroelastic analysis based on the high-order panel method and modal method is presented. The static aeroelastic characteristics of flexible wings are investigated using this method. Three-dimension...A method for static aeroelastic analysis based on the high-order panel method and modal method is presented. The static aeroelastic characteristics of flexible wings are investigated using this method. Three-dimensional aerodynamic models of flexible wings are constructed based on the geometry of wing configuration, and the modal method is adopted to achieve the fluid-structure coupling. The static aeroelastic characteristics of the AGARD445.6 wing and a low-aspect-ratio wing are investigated in this study. The influences of elastic structural deformation on aerodynamic forces are studied with an emphasis analyzing the aerodynamic coefficients, wing root loads, structural deformation and pressure distribution of different sections, and results are compared with the results from wind-tunnel tests and the elastic results based on experimental aerodynamic forces. It is concluded that aerodynamic forces can be accurately calculated with the high-order panel method. The method presented in this study is feasible, credible and efficient. Comprehensive static aeroelastic characteristics can be provided by the method for early phases of aircraft design.展开更多
A new statistical method, the fuzzy analytical method, was introduced in the optimization processes of liposome preparation. It took the full advantage of the information from orthogonal experiments to obtain the opti...A new statistical method, the fuzzy analytical method, was introduced in the optimization processes of liposome preparation. It took the full advantage of the information from orthogonal experiments to obtain the optimal liposome preparation conditions by considering all the evaluation indexes. Liposomes were made by the modified reverse-phase evaporation method and the properties of liposomes including size, encapsulation efficiency and physical stability were selected as the evaluation indexes to indicate the quality of liposomes. The experimental data of these properties were analyzed by three different methods including direct observation, variance analysis and fuzzy analytical method. The optimal preparation conditions obtained from these methods were validated with further experiments. The results of all possible combinations of levels for all factors in orthogonal experiments were acquired by the fuzzy analytical method. All evaluation indexes were taken into account and the optimal preparation condition was obtained. The optimal preparation conditions from direct observation and fuzzy analytical method were different and further validation studies indicated that the optimal conditions obtained from the fuzzy analytical method were in agreement with that from traditional statistical analysis. Fuzzy analytical method avoided the problem resulted from the traditional method, in which different levels of the same factor were obtained when considering different evaluation indexes. More information could be obtained from the fuzzy analytical method and the blind area within the experimental range was eliminated. As a result, fuzzy analytical method can be applied in the optimization processes of liposome preparation.展开更多
基金provided by the National Natural Science Foundation of China(Nos.51322401,51309222,51323004,51579239 and 51574223)the Opening Project Fund of Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation(No.CDPM2014KF03)+2 种基金the State Key Laboratory for GeoMechanics Opening Project Fund of Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and MitigationDeep Underground Engineering,China University of Mining&Technology(No.SKLGDUEK1305)China Postdoctoral Science Foundation(Nos.2014M551700and 2013M531424)
文摘Based on the safety coefficient method,which assigns rock failure criteria to calculate the rock mass unit,the safety coefficient contour of surrounding rock is plotted to judge the distribution form of the fractured zone in the roadway.This will provide the basis numerical simulation to calculate the surrounding rock fractured zone in a roadway.Using the single factor and multi-factor orthogonal test method,the evolution law of roadway surrounding rock displacements,plastic zone and stress distribution under different conditions is studied.It reveals the roadway surrounding rock burst evolution process,and obtains five kinds of failure modes in deep soft rock roadway.Using the fuzzy mathematics clustering analysis method,the deep soft surrounding rock failure model in Zhujixi mine can be classified and patterns recognized.Compared to the identification results and the results detected by geological radar of surrounding rock loose circle,the reliability of the results of the pattern recognition is verified and lays the foundations for the support design of deep soft rock roadways.
文摘In this paper, on the basis of the implementation of the national chemical industry standard analytical test methods and analysis of test items, a food additive quality analysis and inspection of network management applications are developed using the development technology of Visual Basic language and computer system operating environment, to achieve a network management software for users on food additives of quality analytical testing. The software sets up an information sharing network platform for enterprise and quality management departments, which is a major innovation in the food additive quality analysis on test management methods and tools.
基金Supported by Major State Basic Research Development Program of China("973" Program,No.2010CB731502)
文摘A data processing method was proposed for eliminating the end restraint in triaxial tests of soil. A digital image processing method was used to calculate the local deformations and local stresses for any region on the surface of triaxial soil specimens. The principle and implementation of this digital image processing method were introduced as well as the calculation method for local mechanical properties of soil specimens. Comparisons were made between the test results calculated by the data from both the entire specimen and local regions, and it was found that the deformations were more uniform in the middle region compared with the entire specimen. In order to quantify the nonuniform characteristic of deformation, the non-uniformity coefficients of strain were defined and calculated. Traditional and end-lubricated triaxial tests were conducted under the same condition to investigate the effects of using local region data for deformation calculation on eliminating the end restraint of specimens. After the statistical analysis of all test results, it was concluded that for the tested soil specimen with the size of 39.1 mm × 80 ram, the utilization of the middle 35 mm region of traditional specimens in data processing had a better effect on eliminating end restraint compared with end lubrication. Furthermore, the local data analysis in this paper was validated through the comparisons with the test results from other researchers.
文摘The performance of a digging shovel mainly depends on the style of the shovel, while the conventional experiment methods always suffer from the problems of high lost and long period. Aiming at these problems and the characteristic that soil is composed of countless small particles, dynamic simulation analysis was performed on the resistance to a bionic digging shovel and crushing rate of the soil during the normal working process of the bionic digging shovel by EDEM through numerical simulation, calculation and comparison. The results showed that compared with the ordinary shovel, the average drag-reducing rate in the X direction was 10.41%, and the average drag-reducing rate in the Y direction was 16.28%, and the soil crushing rate was improved by 2.67%. Therefore, the bionic digging shovel has certain superiority and extension value in structure and performance. Moreover, this analysis case fully demonstrates the unique advantage of DEM method and its generalizability, and provides certain reference for similar studies.
文摘In this paper, a pilling segmentation method was introduced for objective pilling evaluation. Traditionally, image data collected are photo-sensitive which suffered seriously from the light reflectivity from surface and color patterns on fabrics. The data used in the article were surface profile in gray level format. In this study, the background approximation by wavelet analysis approach was introduced. The original image was orthogonally decomposed and represented by sets of wavelet coefficients. The approximation coefficients were extracted at various levels and reconstructed to form a background. The results demonstrated a very effective segmentation in all tested fabrics.
文摘The hypothesis in drug clinical trials is that the drug is better than a placebo in patients suffering from a disease. The unstated assumption is that the drug cures the disease or is a powerful treatment for the disease. This is an incorrect assumption. Drugs do not cure or treat diseases. The body heals itself; drugs promote this ability of the body to heal itself. Placebos are assumed to be inactive; however, placebos can also promote the ability of the body to heal itself. Placebos are actually treatments that can stimulate endogenous healing mechanisms. The possible place of placebos in health management is controversial. Clinical trial design should be altered. The hypothesis of clinical trials should be that the drug speeds up or improves the healing of the patient, putting patient healing as the first objective. Placebos should not be used as controls but could be tested as drugs in their own right. The control in clinical trials should be no treatment. Alternatively, new drugs could be compared to existing drugs in clinical trials.
文摘Steel plates are widely used in various structures, such as the deck and bodies of ships and bridges, and in the aerospace industry. In many instances, these plates are subjected to axial compression loads that predispose the sheets to instability and buckling. In this study, we investigate the buckling and post-buckling behaviors of steel plates having groove-shaped cutouts of various dimensions and angles using finite element method (FEM) (by ABAQUS software) and experimental tests (by an Instron servohydraulic machine). Boundary conditions were clamped by supports at upper and lower ends and free supports at the other edges. The results of both numerical and experimental analyses are compared, which show a very good agreement between them. Finally, based on the experimental findings, formulas are presented for the determination of the buckling load of such plates.
基金supported by the National Natural Science Foundation of China (Grant Nos. 60736025, 90716006 and 10902006)the Doctoral Program Foundation of Institutions of Higher Education of China (Grant No. 20091102110015)the Major Programs of China National Space Administration (Grant No. D2120060013)
文摘A method for static aeroelastic analysis based on the high-order panel method and modal method is presented. The static aeroelastic characteristics of flexible wings are investigated using this method. Three-dimensional aerodynamic models of flexible wings are constructed based on the geometry of wing configuration, and the modal method is adopted to achieve the fluid-structure coupling. The static aeroelastic characteristics of the AGARD445.6 wing and a low-aspect-ratio wing are investigated in this study. The influences of elastic structural deformation on aerodynamic forces are studied with an emphasis analyzing the aerodynamic coefficients, wing root loads, structural deformation and pressure distribution of different sections, and results are compared with the results from wind-tunnel tests and the elastic results based on experimental aerodynamic forces. It is concluded that aerodynamic forces can be accurately calculated with the high-order panel method. The method presented in this study is feasible, credible and efficient. Comprehensive static aeroelastic characteristics can be provided by the method for early phases of aircraft design.
文摘A new statistical method, the fuzzy analytical method, was introduced in the optimization processes of liposome preparation. It took the full advantage of the information from orthogonal experiments to obtain the optimal liposome preparation conditions by considering all the evaluation indexes. Liposomes were made by the modified reverse-phase evaporation method and the properties of liposomes including size, encapsulation efficiency and physical stability were selected as the evaluation indexes to indicate the quality of liposomes. The experimental data of these properties were analyzed by three different methods including direct observation, variance analysis and fuzzy analytical method. The optimal preparation conditions obtained from these methods were validated with further experiments. The results of all possible combinations of levels for all factors in orthogonal experiments were acquired by the fuzzy analytical method. All evaluation indexes were taken into account and the optimal preparation condition was obtained. The optimal preparation conditions from direct observation and fuzzy analytical method were different and further validation studies indicated that the optimal conditions obtained from the fuzzy analytical method were in agreement with that from traditional statistical analysis. Fuzzy analytical method avoided the problem resulted from the traditional method, in which different levels of the same factor were obtained when considering different evaluation indexes. More information could be obtained from the fuzzy analytical method and the blind area within the experimental range was eliminated. As a result, fuzzy analytical method can be applied in the optimization processes of liposome preparation.
