The un-coincide coordinate error in the single-axis rotating fiber optic strap-down inertial navigation system（SINS） is analyzed. Firstly, a rotating modulation technology is presented for SINS. The method provides ...The un-coincide coordinate error in the single-axis rotating fiber optic strap-down inertial navigation system（SINS） is analyzed. Firstly, a rotating modulation technology is presented for SINS. The method provides the enhanced property of SINS when using the same-leveled inertial measurement units. Then, the rotating struc- ture modification is derived and augmented to resolve the un-modulated error-accumulated problem. As the insuf- ficient machine processing, the horizontal and the vertical errors on the machine surface are inevitable, and the in- volved coordinates are difficult to get the exact coincident. So, two major kinds of coordinate situation are stud- ied. The equivalent error models on gyro and acceleration outputs are built for each situation, and the impact is analyzed for compensation. The part of attitude and position error models caused by the built angle-rate error is established to calculate the un-eoincident impact. Considering these conditions of different gyro accuracy and mo- tion states simultaneously, numerical simulations are implemented. Results indicate that the SINS modulation ac- curacy is seriously affected by the combined factors on gyro accuracy and motion conditions.展开更多
Abstract： With a determinate danger zone and evacuation demand caused by an emergency, an optimization method for the evacuation zone with network reconfiguration based on dynamic simulation is proposed. The method c...Abstract： With a determinate danger zone and evacuation demand caused by an emergency, an optimization method for the evacuation zone with network reconfiguration based on dynamic simulation is proposed. The method contains three modules. First, the network in the evacuation zone is optimized by a model with the integrated strategy of lane reversal and intersection conflict elimination. Secondly, the dynamic evacuation simulation model based on the cell transmission model is applied to simulate the dynamic propagation process of evacuated vehicles in the network in the evacuation zone. The evacuation time for all evacuated vehicles leaving the danger zone is obtained and the setting of the current evacuation zone is fed back. Thirdly, the arrival distributions of evacuated vehicles at critical intersections of the evacuation zone are also obtained to estimate the delay at critical intersection to determine whether the intersection should be taken as the critical intersection in the next iteration. The evacuation zone is expanded gradually through iteration, and the reasonable evacuation zone and the optimal evacuation network is confirmed. Based on the survey of the parking lot and urban street network around Nanjing Olympic Sports Center, the models and the iterative algorithm were applied to obtain the optimal plan of the evacuation zone with network reconfiguration in an evacuation situation to verify the validity of the proposed method.展开更多
In this paper we address the dynamics of compensation cutting process from both Laplace s frequency domain and the time domain of the first time, using the two computer aided analyzing softwares: MATLAB and SIMULI...In this paper we address the dynamics of compensation cutting process from both Laplace s frequency domain and the time domain of the first time, using the two computer aided analyzing softwares: MATLAB and SIMULINK. Theoretical analysis and simulation experiments firstly show that not only the systematical stiffness of workpiece, spindle and tools, but also the regenerated coefficient affects the compensation displacement effect. The results show that the SREC is practicable in reality to decease the spindle induced errors in many engineering applications such as hard boring through simulation and the preliminary experiment results.展开更多
Since real world communication channels are not error free, the coded data transmitted on them may be corrupted, and block based image coding systems are vulnerable to transmission impairment. So the best neighborh...Since real world communication channels are not error free, the coded data transmitted on them may be corrupted, and block based image coding systems are vulnerable to transmission impairment. So the best neighborhood match method using genetic algorithm is used to conceal the error blocks. Experimental results show that the searching space can be greatly reduced by using genetic algorithm compared with exhaustive searching method, and good image quality is achieved. The peak signal noise ratios(PSNRs) of the restored images are increased greatly.展开更多
基金Supported by the National Natural Science Foundation of China(60702003)the Aviation Science Foundation(20080852011)+1 种基金the Specialized Research Fund for the Doctoral Program of Higher Education of China(20070287045)the NUAA Research Fundation(NS2010066)~~
文摘The un-coincide coordinate error in the single-axis rotating fiber optic strap-down inertial navigation system（SINS） is analyzed. Firstly, a rotating modulation technology is presented for SINS. The method provides the enhanced property of SINS when using the same-leveled inertial measurement units. Then, the rotating struc- ture modification is derived and augmented to resolve the un-modulated error-accumulated problem. As the insuf- ficient machine processing, the horizontal and the vertical errors on the machine surface are inevitable, and the in- volved coordinates are difficult to get the exact coincident. So, two major kinds of coordinate situation are stud- ied. The equivalent error models on gyro and acceleration outputs are built for each situation, and the impact is analyzed for compensation. The part of attitude and position error models caused by the built angle-rate error is established to calculate the un-eoincident impact. Considering these conditions of different gyro accuracy and mo- tion states simultaneously, numerical simulations are implemented. Results indicate that the SINS modulation ac- curacy is seriously affected by the combined factors on gyro accuracy and motion conditions.
基金The National Natural Science Foundation of China(No.51408190)
文摘Abstract： With a determinate danger zone and evacuation demand caused by an emergency, an optimization method for the evacuation zone with network reconfiguration based on dynamic simulation is proposed. The method contains three modules. First, the network in the evacuation zone is optimized by a model with the integrated strategy of lane reversal and intersection conflict elimination. Secondly, the dynamic evacuation simulation model based on the cell transmission model is applied to simulate the dynamic propagation process of evacuated vehicles in the network in the evacuation zone. The evacuation time for all evacuated vehicles leaving the danger zone is obtained and the setting of the current evacuation zone is fed back. Thirdly, the arrival distributions of evacuated vehicles at critical intersections of the evacuation zone are also obtained to estimate the delay at critical intersection to determine whether the intersection should be taken as the critical intersection in the next iteration. The evacuation zone is expanded gradually through iteration, and the reasonable evacuation zone and the optimal evacuation network is confirmed. Based on the survey of the parking lot and urban street network around Nanjing Olympic Sports Center, the models and the iterative algorithm were applied to obtain the optimal plan of the evacuation zone with network reconfiguration in an evacuation situation to verify the validity of the proposed method.
文摘In this paper we address the dynamics of compensation cutting process from both Laplace s frequency domain and the time domain of the first time, using the two computer aided analyzing softwares: MATLAB and SIMULINK. Theoretical analysis and simulation experiments firstly show that not only the systematical stiffness of workpiece, spindle and tools, but also the regenerated coefficient affects the compensation displacement effect. The results show that the SREC is practicable in reality to decease the spindle induced errors in many engineering applications such as hard boring through simulation and the preliminary experiment results.
文摘Since real world communication channels are not error free, the coded data transmitted on them may be corrupted, and block based image coding systems are vulnerable to transmission impairment. So the best neighborhood match method using genetic algorithm is used to conceal the error blocks. Experimental results show that the searching space can be greatly reduced by using genetic algorithm compared with exhaustive searching method, and good image quality is achieved. The peak signal noise ratios(PSNRs) of the restored images are increased greatly.
