Polarization coding is a specific encoding method by using the polarization state of optical signal carrying coded in- formation. It focuses on nonlinear effects, polarization mode dispersion and other issues in high-...Polarization coding is a specific encoding method by using the polarization state of optical signal carrying coded in- formation. It focuses on nonlinear effects, polarization mode dispersion and other issues in high-speed fiber-optic communi- cations. This paper presents a measurement method for polarization state based on elastic-optic modulator. This method not only retains the original advantages of elastic-optic modulator for polarization measurement, but also overcomes the defects of existing methods including high modulation frequency and invalid collection by using array detector. Matlab simulation and experimental verification scheme are given. The feasibility of this method is verified through theoretical analysis, and simulation and experimental results are carried out. The error analysis of the measurement results shows that the method can meet the measurement requirements and provide conditions for using the polarization encoding in high-speed communication.展开更多
The Qinling tunnel with length of 18. 488km is located on the railway line from Xi’ an (Shanxi Province) to Ankan (Sichuan Province) in the middle of Qinling moun- tain. It is the longest double track railway tunnel ...The Qinling tunnel with length of 18. 488km is located on the railway line from Xi’ an (Shanxi Province) to Ankan (Sichuan Province) in the middle of Qinling moun- tain. It is the longest double track railway tunnel in China and takes the third place in the world. According to the design, the break-through error in vertical direction caused by the al- timetric control surveying is limited to 18mm for the case of one piercing face. Because the leveling route reaches over 120km in length and must go over two mountains in 2 800m height, the first-order precise leveling and precise gravity measurement should be carried out in the construction stage. In this paper the field leveling approach, the application of new technology,some experience as well as the office calculation with final results analysis are in- troduced. By meticulous planning, organization and observation, the final accuracy of vertical difference between two tunnel end points is only 8mm, and it provides reliable surveying guarantee for this great tunnel engineering. Finally it is pointed out that this vertical differ- ence distinguishes obviously from the primary measurement result as high as 114mm. It means that the primary result is not accurate enough.展开更多
To better understand the crustal deformation of the South China Sea Basin, we produce a mechanically consistent 2-dimensional model for observing regional velocity field in the South China Sea (SCS). We studied the do...To better understand the crustal deformation of the South China Sea Basin, we produce a mechanically consistent 2-dimensional model for observing regional velocity field in the South China Sea (SCS). We studied the dominating regional tectonic stress field by geodetic measurements and finite element analysis, the spatial variations of velocity field and strain field, and relative movements among different blocks, using a 2-dimensional model describing crustal deformation of the South China Sea Basin. Strain results show that the SCS is extending at present. The western part of SCS is opening gradually in NW- SE direction from its northern margin to the south, but the eastern part of SCS is opening gradually from its central part to the north and south. In addition, we analyzed the plate kinematics to the deformation of the SCS, using a two-dimensional finite element model. Our simulations results are well explained by available geodetic data. The movement of SCS is resulted from interactions among Indian Plate, Pacific Plate, Philippine Sea Plate, and Eurasian Plate.展开更多
To increase accuracy of navigation parameters,a perspective measuring complex with intellectual components is developed.Conception of synthesis optimal structure of the measuring complex is realized basing on a select...To increase accuracy of navigation parameters,a perspective measuring complex with intellectual components is developed.Conception of synthesis optimal structure of the measuring complex is realized basing on a selective method using principles of the functional systems.Selection of measured information is finished by original numeric criterion of observation level of state vector components.Prediction is realized by algorithm of self-organization that makes synthesis of the optimal complication.Therefore mechanism of self-regulation is realized and accuracy of the selective navigation complex is increased.展开更多
The increase of quality consciousness brings about the growth of significance of metrological systems. Besides the significance, the level of automatization, flexibility, accuracy, et al. have advanced. The modern mea...The increase of quality consciousness brings about the growth of significance of metrological systems. Besides the significance, the level of automatization, flexibility, accuracy, et al. have advanced. The modern measuring systems are constructed so that nearly all necessary dimensional characteristics can be measured with them. However, conventional measuring systems are provided for particular mode measurements. This research paper presents and compares several conventional and modem measuring systems and methods. The measured value is roundness, one of the basic shapes of cross section in mechanical engineering. This paper arises in search of answers for the question whether conventional measuring techniques and equipments are made redundant because of the modern ones. In what segments and in which criterion are modem methods preferable？展开更多
文摘Polarization coding is a specific encoding method by using the polarization state of optical signal carrying coded in- formation. It focuses on nonlinear effects, polarization mode dispersion and other issues in high-speed fiber-optic communi- cations. This paper presents a measurement method for polarization state based on elastic-optic modulator. This method not only retains the original advantages of elastic-optic modulator for polarization measurement, but also overcomes the defects of existing methods including high modulation frequency and invalid collection by using array detector. Matlab simulation and experimental verification scheme are given. The feasibility of this method is verified through theoretical analysis, and simulation and experimental results are carried out. The error analysis of the measurement results shows that the method can meet the measurement requirements and provide conditions for using the polarization encoding in high-speed communication.
文摘The Qinling tunnel with length of 18. 488km is located on the railway line from Xi’ an (Shanxi Province) to Ankan (Sichuan Province) in the middle of Qinling moun- tain. It is the longest double track railway tunnel in China and takes the third place in the world. According to the design, the break-through error in vertical direction caused by the al- timetric control surveying is limited to 18mm for the case of one piercing face. Because the leveling route reaches over 120km in length and must go over two mountains in 2 800m height, the first-order precise leveling and precise gravity measurement should be carried out in the construction stage. In this paper the field leveling approach, the application of new technology,some experience as well as the office calculation with final results analysis are in- troduced. By meticulous planning, organization and observation, the final accuracy of vertical difference between two tunnel end points is only 8mm, and it provides reliable surveying guarantee for this great tunnel engineering. Finally it is pointed out that this vertical differ- ence distinguishes obviously from the primary measurement result as high as 114mm. It means that the primary result is not accurate enough.
基金Supported by the National Basic Research Program of China (973 Program) (No. 2007cb411702)
文摘To better understand the crustal deformation of the South China Sea Basin, we produce a mechanically consistent 2-dimensional model for observing regional velocity field in the South China Sea (SCS). We studied the dominating regional tectonic stress field by geodetic measurements and finite element analysis, the spatial variations of velocity field and strain field, and relative movements among different blocks, using a 2-dimensional model describing crustal deformation of the South China Sea Basin. Strain results show that the SCS is extending at present. The western part of SCS is opening gradually in NW- SE direction from its northern margin to the south, but the eastern part of SCS is opening gradually from its central part to the north and south. In addition, we analyzed the plate kinematics to the deformation of the SCS, using a two-dimensional finite element model. Our simulations results are well explained by available geodetic data. The movement of SCS is resulted from interactions among Indian Plate, Pacific Plate, Philippine Sea Plate, and Eurasian Plate.
文摘To increase accuracy of navigation parameters,a perspective measuring complex with intellectual components is developed.Conception of synthesis optimal structure of the measuring complex is realized basing on a selective method using principles of the functional systems.Selection of measured information is finished by original numeric criterion of observation level of state vector components.Prediction is realized by algorithm of self-organization that makes synthesis of the optimal complication.Therefore mechanism of self-regulation is realized and accuracy of the selective navigation complex is increased.
文摘The increase of quality consciousness brings about the growth of significance of metrological systems. Besides the significance, the level of automatization, flexibility, accuracy, et al. have advanced. The modern measuring systems are constructed so that nearly all necessary dimensional characteristics can be measured with them. However, conventional measuring systems are provided for particular mode measurements. This research paper presents and compares several conventional and modem measuring systems and methods. The measured value is roundness, one of the basic shapes of cross section in mechanical engineering. This paper arises in search of answers for the question whether conventional measuring techniques and equipments are made redundant because of the modern ones. In what segments and in which criterion are modem methods preferable？
