A Y-band frequency doubler is analyzed and designed with GaAs planar Schottky diode, which is flip-chip solded into a 50 μm thick quartz substrate. Diode embedding impedance is found by full- wave analysis with lumpe...A Y-band frequency doubler is analyzed and designed with GaAs planar Schottky diode, which is flip-chip solded into a 50 μm thick quartz substrate. Diode embedding impedance is found by full- wave analysis with lumped port to model the nonlinear junction for impedance matching without the need of diode equivalent circuit model. All the matching circuit is designed ＂on-chip＂ and the mul- tiplier is self-biasing. To the doubler, a conversion efficiency of 6.1% and output power of 5.4mW are measured at 214GHz with input power of 88mW, and the typical measured efficiency is 4.5% in 200 - 225 GHz.展开更多
In order to investigate the enhancement of data privacy by distributing data packets via multiple paths, this paper fommlates a security model and analyzes the privacy problem in mul- tipath scenarios leveraging infor...In order to investigate the enhancement of data privacy by distributing data packets via multiple paths, this paper fommlates a security model and analyzes the privacy problem in mul- tipath scenarios leveraging inforrmtion theoretic concept. Based on proposed model, a privacy function related to the path number is discussed. We heuristically recommend the optin^al path num- ber and analyze the tradeoff among the perform- ance, resource consumption and privacy. For re- ducing the inforlmtion leakage, the data schedule algorithms are also proposed. The analytical model can provide guidelines for the multipath protocol design.展开更多
This paper presents practical distribution system equipment models such as various distributed generators, voltage regulators, and loads for fast three phase unbalanced load flow calculation in distribution systems. T...This paper presents practical distribution system equipment models such as various distributed generators, voltage regulators, and loads for fast three phase unbalanced load flow calculation in distribution systems. The method can calculate voltage and current of distribution systems, in which distributed generators are introduced. The calculation time of the proposed method is about 40 times faster than that of the Newton-Raphson method. Moreover, an introduction effect evaluation tool for distributed generators using the proposed three phase unbalanced load flow calculation is presented. It provides various functions such as a power system network diagram creation function and a voltage profile chart display function. Therefore, the introduction effect evaluation of distributed generators in distribution systems can be evaluated quite easily.展开更多
The first medical high intensity cyclotron CYCIAE-30 and its beam line for the isotope production were built in 1994 at China Institute of Atomic Energy.Now,an upgrading beam line system is designed based on the exist...The first medical high intensity cyclotron CYCIAE-30 and its beam line for the isotope production were built in 1994 at China Institute of Atomic Energy.Now,an upgrading beam line system is designed based on the existing beam line of CYCIAE-30 to transport the beam extracted from the cyclotron to a gas target for the new isotope production,including elements location design,optics simulation and magnet design.The machining and installation of all the elements are accomplished based on the design.The beam tuning is finished and the transmission of 96.5% is obtained.展开更多
基金Supported by the 12th Five-year Defense Pre-research Fund of China(No.51308030509)
文摘A Y-band frequency doubler is analyzed and designed with GaAs planar Schottky diode, which is flip-chip solded into a 50 μm thick quartz substrate. Diode embedding impedance is found by full- wave analysis with lumped port to model the nonlinear junction for impedance matching without the need of diode equivalent circuit model. All the matching circuit is designed ＂on-chip＂ and the mul- tiplier is self-biasing. To the doubler, a conversion efficiency of 6.1% and output power of 5.4mW are measured at 214GHz with input power of 88mW, and the typical measured efficiency is 4.5% in 200 - 225 GHz.
基金This paper was partially supported by the National Basic Re-search Program of China under Grant No. 2007CB307100 the National Natural Science Foundation of China under Crant No 60972010 the Fundamental Research Funds for the Central U- niversities under Grant No. 2011JBM018.
文摘In order to investigate the enhancement of data privacy by distributing data packets via multiple paths, this paper fommlates a security model and analyzes the privacy problem in mul- tipath scenarios leveraging inforrmtion theoretic concept. Based on proposed model, a privacy function related to the path number is discussed. We heuristically recommend the optin^al path num- ber and analyze the tradeoff among the perform- ance, resource consumption and privacy. For re- ducing the inforlmtion leakage, the data schedule algorithms are also proposed. The analytical model can provide guidelines for the multipath protocol design.
文摘This paper presents practical distribution system equipment models such as various distributed generators, voltage regulators, and loads for fast three phase unbalanced load flow calculation in distribution systems. The method can calculate voltage and current of distribution systems, in which distributed generators are introduced. The calculation time of the proposed method is about 40 times faster than that of the Newton-Raphson method. Moreover, an introduction effect evaluation tool for distributed generators using the proposed three phase unbalanced load flow calculation is presented. It provides various functions such as a power system network diagram creation function and a voltage profile chart display function. Therefore, the introduction effect evaluation of distributed generators in distribution systems can be evaluated quite easily.
文摘The first medical high intensity cyclotron CYCIAE-30 and its beam line for the isotope production were built in 1994 at China Institute of Atomic Energy.Now,an upgrading beam line system is designed based on the existing beam line of CYCIAE-30 to transport the beam extracted from the cyclotron to a gas target for the new isotope production,including elements location design,optics simulation and magnet design.The machining and installation of all the elements are accomplished based on the design.The beam tuning is finished and the transmission of 96.5% is obtained.
