A novel algorithm based on Radon-Ambiguity Transform (RAT) and Adaptive Signal Decomposition (ASD) is presented for the detection and parameter estimation of multicompo-nent Linear Frequency Modulated (LFM) signals. T...A novel algorithm based on Radon-Ambiguity Transform (RAT) and Adaptive Signal Decomposition (ASD) is presented for the detection and parameter estimation of multicompo-nent Linear Frequency Modulated (LFM) signals. The key problem lies in the chirplet estimation. Genetic algorithm is employed to search for the optimization parameter of chirplet. High estimation accuracy can be obtained even at low Signal-to-Noisc Ratio(SNR). Finally simulation results are provided to demonstrate the performance of the proposed algorithm.展开更多
Due to the limited scenes that synthetic aperture radar(SAR)satellites can detect,the full-track utilization rate is not high.Because of the computing and storage limitation of one satellite,it is difficult to process...Due to the limited scenes that synthetic aperture radar(SAR)satellites can detect,the full-track utilization rate is not high.Because of the computing and storage limitation of one satellite,it is difficult to process large amounts of data of spaceborne synthetic aperture radars.It is proposed to use a new method of networked satellite data processing for improving the efficiency of data processing.A multi-satellite distributed SAR real-time processing method based on Chirp Scaling(CS)imaging algorithm is studied in this paper,and a distributed data processing system is built with field programmable gate array(FPGA)chips as the kernel.Different from the traditional CS algorithm processing,the system divides data processing into three stages.The computing tasks are reasonably allocated to different data processing units(i.e.,satellites)in each stage.The method effectively saves computing and storage resources of satellites,improves the utilization rate of a single satellite,and shortens the data processing time.Gaofen-3(GF-3)satellite SAR raw data is processed by the system,with the performance of the method verified.展开更多
In multi-LFM signal condition, Radon-Ambiguity Transform (RAT) of the strong LFM component has strong suppression effect on that of the weak LFM component. A method named as Recursive Filtering RAT (RFRAT) algorithm i...In multi-LFM signal condition, Radon-Ambiguity Transform (RAT) of the strong LFM component has strong suppression effect on that of the weak LFM component. A method named as Recursive Filtering RAT (RFRAT) algorithm is proposed for solving this problem. By fully using of the Maximum Likelihood (ML) estimation value of the frequency modulation rate got by RAT, RFRAT can detect the noisy multi-LFM signals out step by step. The merit of this new method is validated by an illustrative example in low Signal-to-Noise-Ratio (SNR) condition.展开更多
Error Estimating Code (EEC) is a new channel coding method to estimate the Bit Error Rate (BER) information of the transmitted sequence. However, the estimated BER is not precise enough if the practical value of BER i...Error Estimating Code (EEC) is a new channel coding method to estimate the Bit Error Rate (BER) information of the transmitted sequence. However, the estimated BER is not precise enough if the practical value of BER is high. A weighted EEC estimation method is proposed to improve the accuracy performance of BER estimation by classifying the raw estimation results into intervals and multiplying them by different coefficients separately. The applications of weighted EEC in modulation selection scheme and distributed video coding are discussed. Simulation results show that the EEC-based modulation selection method can achieve better performance at a cost of little redundancy and computation, and the EEC-based rate estimation method in distributed video coding can save the decoding time.展开更多
The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implem...The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implementation method is described as well as AD6620 parameter setting analysis. It also presents a flow chart of the on-line programming with the help of PC. The algorithm for demodulation AM signal is discussed.展开更多
Instantaneous Doppler frequency for squint SAR imaging has been found with ChirpScaling Algorithm (CSA). Because the azimuth sample is not perpendicular to the range sample,the range signal must impact on the azimuth ...Instantaneous Doppler frequency for squint SAR imaging has been found with ChirpScaling Algorithm (CSA). Because the azimuth sample is not perpendicular to the range sample,the range signal must impact on the azimuth signal in the squint SAR data processing, andthe different slant range targets have different Doppler frequencies. From the mathematicalmodel of SAR echo signal, this paper carefully analyzes the instantaneous azimuth frequency, theinstantaneous Doppler frequency component of the azimuth frequency and the impact of rangechirp on azimuth frequency, which explains that Doppler frequency should be properly selected forcorrect SAR imaging in the squint SAR. The results of point target simulation experiments showthat the way is reasonable for the squint SAR and can effectively complete range compressionand azimuth focusing, and improve images' quality.展开更多
文摘A novel algorithm based on Radon-Ambiguity Transform (RAT) and Adaptive Signal Decomposition (ASD) is presented for the detection and parameter estimation of multicompo-nent Linear Frequency Modulated (LFM) signals. The key problem lies in the chirplet estimation. Genetic algorithm is employed to search for the optimization parameter of chirplet. High estimation accuracy can be obtained even at low Signal-to-Noisc Ratio(SNR). Finally simulation results are provided to demonstrate the performance of the proposed algorithm.
基金Project(2017YFC1405600)supported by the National Key R&D Program of ChinaProject(18JK05032)supported by the Scientific Research Project of Education Department of Shaanxi Province,China。
文摘Due to the limited scenes that synthetic aperture radar(SAR)satellites can detect,the full-track utilization rate is not high.Because of the computing and storage limitation of one satellite,it is difficult to process large amounts of data of spaceborne synthetic aperture radars.It is proposed to use a new method of networked satellite data processing for improving the efficiency of data processing.A multi-satellite distributed SAR real-time processing method based on Chirp Scaling(CS)imaging algorithm is studied in this paper,and a distributed data processing system is built with field programmable gate array(FPGA)chips as the kernel.Different from the traditional CS algorithm processing,the system divides data processing into three stages.The computing tasks are reasonably allocated to different data processing units(i.e.,satellites)in each stage.The method effectively saves computing and storage resources of satellites,improves the utilization rate of a single satellite,and shortens the data processing time.Gaofen-3(GF-3)satellite SAR raw data is processed by the system,with the performance of the method verified.
基金Supported by the National 973 Program(No.973-1-12)
文摘In multi-LFM signal condition, Radon-Ambiguity Transform (RAT) of the strong LFM component has strong suppression effect on that of the weak LFM component. A method named as Recursive Filtering RAT (RFRAT) algorithm is proposed for solving this problem. By fully using of the Maximum Likelihood (ML) estimation value of the frequency modulation rate got by RAT, RFRAT can detect the noisy multi-LFM signals out step by step. The merit of this new method is validated by an illustrative example in low Signal-to-Noise-Ratio (SNR) condition.
基金supported bythe 111 Project under Grant No. B08004the major project of Ministry of Industry and Information Technology of the People's Republic of China under Grant No. 2010ZX03002-006China Fundamental Research Funds for the Central Universities
文摘Error Estimating Code (EEC) is a new channel coding method to estimate the Bit Error Rate (BER) information of the transmitted sequence. However, the estimated BER is not precise enough if the practical value of BER is high. A weighted EEC estimation method is proposed to improve the accuracy performance of BER estimation by classifying the raw estimation results into intervals and multiplying them by different coefficients separately. The applications of weighted EEC in modulation selection scheme and distributed video coding are discussed. Simulation results show that the EEC-based modulation selection method can achieve better performance at a cost of little redundancy and computation, and the EEC-based rate estimation method in distributed video coding can save the decoding time.
文摘The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implementation method is described as well as AD6620 parameter setting analysis. It also presents a flow chart of the on-line programming with the help of PC. The algorithm for demodulation AM signal is discussed.
文摘Instantaneous Doppler frequency for squint SAR imaging has been found with ChirpScaling Algorithm (CSA). Because the azimuth sample is not perpendicular to the range sample,the range signal must impact on the azimuth signal in the squint SAR data processing, andthe different slant range targets have different Doppler frequencies. From the mathematicalmodel of SAR echo signal, this paper carefully analyzes the instantaneous azimuth frequency, theinstantaneous Doppler frequency component of the azimuth frequency and the impact of rangechirp on azimuth frequency, which explains that Doppler frequency should be properly selected forcorrect SAR imaging in the squint SAR. The results of point target simulation experiments showthat the way is reasonable for the squint SAR and can effectively complete range compressionand azimuth focusing, and improve images' quality.
