In the recent past, experimental studies have shown some advantages of blade lean and sweep in axial compressors. As most of the experimental results are combined with other features, it is difficult to determine the ...In the recent past, experimental studies have shown some advantages of blade lean and sweep in axial compressors. As most of the experimental results are combined with other features, it is difficult to determine the effect of individual parameters on the performance of the compressor. The present numerical studies are aimed at understanding the performance and three-dimensional flow pattern at the exit of swept and unswept rotors. Three rotors, namely; unswept, 200 forward swept and 200 backward swept rotors are analysed with a specific intention of understanding the pattern of the blade boundary layer flow. The analysis was done using a fully three-dimensional viscous CFD code CFX-5. Results indicated reduction in pressure rise with sweep. Backward sweep is detrimental as far as the performance near endwalls is considered. On the other hand total pressure loss in the wake in mid span region is less with backward sweep, which favours its application here. However, backward sweep adversely affects the stall margin. The ability of the forward sweep to deflect the streamlines towards hub gets diminished at low flow rates. Forward sweep changes the streamline pattern in such a way that the suction surface streamlines are deflected towards the hub and the pressure surface streamlines are deflected towards the easing. An opposite behaviour is observed in backward swept rotors.展开更多
LES (Large-Eddy Simulation) computations were preformed to investigate the mechanisms of a kind of spanwisegroove for the passive control of laminar separation bubble on the suction surface of a low-speed highly loade...LES (Large-Eddy Simulation) computations were preformed to investigate the mechanisms of a kind of spanwisegroove for the passive control of laminar separation bubble on the suction surface of a low-speed highly loadedlow-pressure turbine blade at Re = 50,000 (Reynolds number, based on inlet velocity and axial chord length).Compared with the smooth suction surface, the numerical results indicate that: (1) the groove is effective toshorten and thin the separation bubble, which contributes the flow loss reduction on the groove surface, by thinningthe boundary layer behind the groove and promoting earlier transition inception in the separation bubble; (2)upstream movement of the transition inception location on the grooved surface is suggested being the result of thelower frequency at which the highest amplification rate of instability waves occurs, and the larger initial amplitudeof the disturbance at the most unstable frequency before transition; and (3) the viscous instability mode ispromoted on the grooved surface, due to the thinning of the boundary layer behind the groove.展开更多
文摘In the recent past, experimental studies have shown some advantages of blade lean and sweep in axial compressors. As most of the experimental results are combined with other features, it is difficult to determine the effect of individual parameters on the performance of the compressor. The present numerical studies are aimed at understanding the performance and three-dimensional flow pattern at the exit of swept and unswept rotors. Three rotors, namely; unswept, 200 forward swept and 200 backward swept rotors are analysed with a specific intention of understanding the pattern of the blade boundary layer flow. The analysis was done using a fully three-dimensional viscous CFD code CFX-5. Results indicated reduction in pressure rise with sweep. Backward sweep is detrimental as far as the performance near endwalls is considered. On the other hand total pressure loss in the wake in mid span region is less with backward sweep, which favours its application here. However, backward sweep adversely affects the stall margin. The ability of the forward sweep to deflect the streamlines towards hub gets diminished at low flow rates. Forward sweep changes the streamline pattern in such a way that the suction surface streamlines are deflected towards the hub and the pressure surface streamlines are deflected towards the easing. An opposite behaviour is observed in backward swept rotors.
文摘LES (Large-Eddy Simulation) computations were preformed to investigate the mechanisms of a kind of spanwisegroove for the passive control of laminar separation bubble on the suction surface of a low-speed highly loadedlow-pressure turbine blade at Re = 50,000 (Reynolds number, based on inlet velocity and axial chord length).Compared with the smooth suction surface, the numerical results indicate that: (1) the groove is effective toshorten and thin the separation bubble, which contributes the flow loss reduction on the groove surface, by thinningthe boundary layer behind the groove and promoting earlier transition inception in the separation bubble; (2)upstream movement of the transition inception location on the grooved surface is suggested being the result of thelower frequency at which the highest amplification rate of instability waves occurs, and the larger initial amplitudeof the disturbance at the most unstable frequency before transition; and (3) the viscous instability mode ispromoted on the grooved surface, due to the thinning of the boundary layer behind the groove.
