This paper proposes a new Energyefficient Survivable Routing Protocol(ESRP)based on solar energy and wind mixed for power supply in green wireless mesh networks(WMNs).The ESRP combines hop penalty strategy and floodin...This paper proposes a new Energyefficient Survivable Routing Protocol(ESRP)based on solar energy and wind mixed for power supply in green wireless mesh networks(WMNs).The ESRP combines hop penalty strategy and flooding delaying strategy to improve the performances of traditional routing protocol.This paper uses QualNet to simulate and verify the performances of proposed ESRP.Compared with the traditional routing protocol,the simulation results show that the energy utilization of ESRP is more efficient by 13%.At the same time,ESRP is more load-balanced to postpone the appearance of the first energy depletion node and reduce the number of energy depletion nodes,and thus it effectively improves network survivability.展开更多
This paper performs an experimental study for inverse load reconstruction. By measuring and analyzing the load characteristics of different home and office electric devices, the author shows that a reconstruction of t...This paper performs an experimental study for inverse load reconstruction. By measuring and analyzing the load characteristics of different home and office electric devices, the author shows that a reconstruction of the individual power consumption of different loads from the total measurement of a single power meter is possible.展开更多
This paper presents a nonlinear approach to estimate the consumed energy in electric power distribution feeders. The proposed method uses the statistical solution algorithm to analyze the active energy monthly consump...This paper presents a nonlinear approach to estimate the consumed energy in electric power distribution feeders. The proposed method uses the statistical solution algorithm to analyze the active energy monthly consumption, which enables one to estimate the energy consumption during any period of the year. The energy readings and the normalized accumulated energy profile are used to estimate the hourly consumed active power, which can be used for future planning and sizing the equipment of the electrical system. The effectiveness of the proposed method is demonstrated by comparing the simulated results with that of real measured data.展开更多
In the last few decades, in the world and also in the European Union, considerable resources had been invested in the rapid development of renewable energy sources and distributed generation in general. At the same ti...In the last few decades, in the world and also in the European Union, considerable resources had been invested in the rapid development of renewable energy sources and distributed generation in general. At the same time, power consumption is continuously increasing, and consumers are becoming more complex, which ultimately requires new investments in the distribution network. Concept of smart grids is generally accepted as a possible solution. Smart grid is a concept with many elements, where monitoring and control of every element in the chain of production, transmission, distribution and final consumption enable much more efficient delivery and use of electricity. One of the elements of smart grid efficiency is the ability of real-time demand-supply balancing. This balancing is carried out by monitoring of consumption and redistribution of electricity among individual end users, according to their needs. The aim of this paper is creating algorithm for real-time load management using power measurements. Algorithm for real-time load management at the ETFOS （Faculty of Electrical Engineering in Osijek）, Croatia is created based on measurements of photovoltaic power plant production, the power consumption of air conditioning system and the faculty building total electricity consumption. Expected result of real-time re-dispatching of air conditioners consumption, depending on the level of electricity production in photovoltaic power plant is decreasing peak demand of the faculty.展开更多
基金This work was supported in part by the National Natural Science Foundation of China （61172051, 61071124）, the Fok Ying Tung Education Foundation （121065）, the Program for New Century Excellent Talents in University （11-0075）, the Fundamental Research Funds for the Central Universities （N110204001, N110604008）, and the Specialized Research Fund for the Doctoral Program of Higher Education （20110042110023, 20110042120035）.
文摘This paper proposes a new Energyefficient Survivable Routing Protocol(ESRP)based on solar energy and wind mixed for power supply in green wireless mesh networks(WMNs).The ESRP combines hop penalty strategy and flooding delaying strategy to improve the performances of traditional routing protocol.This paper uses QualNet to simulate and verify the performances of proposed ESRP.Compared with the traditional routing protocol,the simulation results show that the energy utilization of ESRP is more efficient by 13%.At the same time,ESRP is more load-balanced to postpone the appearance of the first energy depletion node and reduce the number of energy depletion nodes,and thus it effectively improves network survivability.
文摘This paper performs an experimental study for inverse load reconstruction. By measuring and analyzing the load characteristics of different home and office electric devices, the author shows that a reconstruction of the individual power consumption of different loads from the total measurement of a single power meter is possible.
文摘This paper presents a nonlinear approach to estimate the consumed energy in electric power distribution feeders. The proposed method uses the statistical solution algorithm to analyze the active energy monthly consumption, which enables one to estimate the energy consumption during any period of the year. The energy readings and the normalized accumulated energy profile are used to estimate the hourly consumed active power, which can be used for future planning and sizing the equipment of the electrical system. The effectiveness of the proposed method is demonstrated by comparing the simulated results with that of real measured data.
文摘In the last few decades, in the world and also in the European Union, considerable resources had been invested in the rapid development of renewable energy sources and distributed generation in general. At the same time, power consumption is continuously increasing, and consumers are becoming more complex, which ultimately requires new investments in the distribution network. Concept of smart grids is generally accepted as a possible solution. Smart grid is a concept with many elements, where monitoring and control of every element in the chain of production, transmission, distribution and final consumption enable much more efficient delivery and use of electricity. One of the elements of smart grid efficiency is the ability of real-time demand-supply balancing. This balancing is carried out by monitoring of consumption and redistribution of electricity among individual end users, according to their needs. The aim of this paper is creating algorithm for real-time load management using power measurements. Algorithm for real-time load management at the ETFOS （Faculty of Electrical Engineering in Osijek）, Croatia is created based on measurements of photovoltaic power plant production, the power consumption of air conditioning system and the faculty building total electricity consumption. Expected result of real-time re-dispatching of air conditioners consumption, depending on the level of electricity production in photovoltaic power plant is decreasing peak demand of the faculty.
