Carbon quantum dots(CQDs)are fluorescent carbon nanomaterials that have been applied to biology,medicine,and optoelectronics,owing to their significant advantages such as simple synthesis methods,low cost,and widely a...Carbon quantum dots(CQDs)are fluorescent carbon nanomaterials that have been applied to biology,medicine,and optoelectronics,owing to their significant advantages such as simple synthesis methods,low cost,and widely available sources of raw synthesis materials.This review summarizes CQD preparation methods,which include hydrothermal and microwave-assisted synthesis methods,as well as separation methods such as centrifugation,dialysis,and filtration.Additionally,we review the application of CQDs in the detection of active ingredients,primarily phenolic compounds,in traditional Chinese medicine.We also discuss the quenching mechanism of CQD fluorescence using the active ingredients of traditional Chinese medicine.Limitations such as insufficient test selectivity,weak fluorescence intensity,and an unclear quantitative relationship between preparation methods and properties should be resolved for the efficient use of CQDs to detect active ingredients in Chinese medicine.展开更多
Product quality and operation cost control obtain increasing emphases in modern chemical system engineering. To improve the fault detection power of the partial least square (PLS) method for quality control, a new QRP...Product quality and operation cost control obtain increasing emphases in modern chemical system engineering. To improve the fault detection power of the partial least square (PLS) method for quality control, a new QRPV statistic is proposed in terms of the VP (variable importance in projection) indices of monitored process variables, which is significantly advanced over and different from the conventional Q statistic. QRPV is calculated only by the residuals of the remarkable process variables (RPVs). Therefore, it is the dominant relation between quality and RPV not all process variables (as in the case of the conventional PLS) that is monitored by this new VP-PLS (VPLS) method. The combination of QRPV and T2 statistics is applied to the quality and cost control of the Tennessee Eastman (TE) process, and weak faults can be detected as quickly as possible. Consequently, the product quality of TE process is guaranteed and operation costs are reduced.展开更多
Aquilaria sinensis(Thymelaeaceae)is widely cultivated in southern China for its significant medicinal usage.The resinous wood,the most used part of the plant as traditional Chinese medicine(TCM),locally called“Chen X...Aquilaria sinensis(Thymelaeaceae)is widely cultivated in southern China for its significant medicinal usage.The resinous wood,the most used part of the plant as traditional Chinese medicine(TCM),locally called“Chen Xiang(沉香)”or Chinese agarwood,has been traditionally used for the treatment of circulatory disorders,abdominal pain,vomiting,and dyspnea.Till date,over 249 compounds have been isolated and identified from this plant.A range of bioactivities,including α-glucosidase inhibitory effects,anti-inflammatory,cytotoxicity,neuroprotective,anti-neuroinflammatory,antimicrobial and acetylcholinesterase inhibitory effects,along with some of the pharmacological mechanisms have been reported for the pure compounds or extracts of Aquilaria sinensis.For the purpose of quality control and clinical safety of drug usage,modern analytical instruments and chemical analysis methods have been applied for analyses of Aquilaria sinensis.In order to comprehensively understand the medicinal application and to fully utilize the plant,a literature search on the herb based on databases including SciFinder,Web of Science,Pubmed,Google Scholar and others was performed and the information regarding to the phytochemistry investigations,pharmacological studies and quality control was summarized in this paper.展开更多
Sequential chemical extraction procedure has been widely used to partition particulate trace metals into various fractions and to describe the distribution and the statue of trace metals in geo environment. One sequen...Sequential chemical extraction procedure has been widely used to partition particulate trace metals into various fractions and to describe the distribution and the statue of trace metals in geo environment. One sequential chemical extraction procedure was employed here to partition various fractions of Mn in soils. The experiment was designed with quality controlling concept in order to show sampling and analytical error. Experimental results obtained on duplicate analysis of all soil samples demonstrated that the precision was less than 10%(at 95%confidence level). The accuracy was estimated by comparing the accepted total concentration of Mn in standard reference materials (SRMs) with the measured sum of the individual fractions. The recovery of Mn from SRM1 and SRM2 was 94.1%and 98.4%, respectively. The detection limit, accuracy and precision of the sequential chemical extraction procedure were discussed in detailed. All the results suggest that the trueness of the analytical method is satisfactory.展开更多
High-resolution ice core records covering long time spans enable reconstruction of the past climatic and environmental conditions allowing the investigation of the earth system's evolution. Preprocessing of ice co...High-resolution ice core records covering long time spans enable reconstruction of the past climatic and environmental conditions allowing the investigation of the earth system's evolution. Preprocessing of ice cores has direct impacts on the data quality control for further analysis since the conventional ice core processing is time-consuming, produces qualitative data, leads to ice mass loss, and leads to risks of potential secondary pollution. However, over the past several decades, preprocessing of ice cores has received less attention than the improvement of ice drilling, the analytical methodology of various indices, and the researches on the climatic and environmental significance of ice core records. Therefore, this papers reviews the development of the processing for ice cores including framework, design as well as materials, analyzes the technical advantages and disadvantages of the different systems. In the past, continuous flowanalysis(CFA) has been successfully applied to process the polar ice cores. However, it is not suitable for ice cores outside polar region because of high level of particles, the memory effect between samples, and the filtration before injection. Ice core processing is a subtle and professional operation due to the fragility of the nonmetallic materials and the random distribution of particles and air bubbles in ice cores, which aggravates uncertainty in the measurements. The future developments of CFA are discussed in preprocessing, memory effect, challenge for brittle ice, coupling with real-time analysis and optimization of CFA in the field. Furthermore, non-polluting cutters with many different configurations could be designed to cut and scrape in multiple directions and to separate inner and outer portions of the core. This system also needs to be coupled with streamlined operation of packaging, coding, and stacking that can be implemented at high resolution and rate, avoiding manual intervention. At the same time, information of the longitudinal sections could be scanned andidentified, and then classified to obtain quantitative data. In addition, irregular ice volume and weight can also be obtained accurately. These improvements are recorded automatically via user-friendly interfaces. These innovations may be applied to other paleomedias with similar features and needs.展开更多
Exergy indicates the maximal energy that can do work effectively. Different from optimization of product quality or calculation of generic energy conservation in most previous studies, the application of exergy analys...Exergy indicates the maximal energy that can do work effectively. Different from optimization of product quality or calculation of generic energy conservation in most previous studies, the application of exergy analysis and exergy cost optimization in petrochemical industry is of great economic and environmental significance. Based on the main fractionator in Jiujiang Petrochemical Complex No. 2 FCCU, an enhanced exergy cost optimization under different operating conditions by adjusting set points of temperature and valves opening degree for flow control is studied in this paper in order to reduce exergy cost and improve the quality of energy. A steadystate optimization algorithm to enhance exergy availability and an objective function comprehensively considering exergy loss are proposed. On the basis of ensuring the quality of petroleum products, the economic benefits can be improved by optimizing the controllable variables due to the fact that exergy cost is decreased.展开更多
To minimize losses between harvest and retail display, a system is needed to track temperature and RH exposure of fresh produce and predict its quality at each step of the distribution chain. With accurate models, suc...To minimize losses between harvest and retail display, a system is needed to track temperature and RH exposure of fresh produce and predict its quality at each step of the distribution chain. With accurate models, such system could （1） identify problematic situations before losses occur; （2） become a management tool for decision makers; and （3） help quantify the real impact of individual inappropriate conditions. A project was initiated to develop models required for such a decision system. Because the data required to develop models were not available for most fruit and vegetables, a series of storage trials was planned for measuring changes in physiological and microbial quality, and development of physiological disorders and/or diseases, as a function of time, temperature and RH. To meet this objective, controlled environment mini-chambers were designed, built and instrumented for measuring the effect of traceable environmental conditions encountered during storage and transportation of fresh horticultural produce of similar size and shape as tomato. Detailed design and performance evaluation of these mini-chambers are presented.展开更多
The objective of this work is to develop an automation system for quality control （QC） in the production of Iodine-125 sealed sources, after undergoing the process of laser beam welding （LBW）. These sources, also ...The objective of this work is to develop an automation system for quality control （QC） in the production of Iodine-125 sealed sources, after undergoing the process of laser beam welding （LBW）. These sources, also known as Iodine-125 seeds are used, successfully, in the treatment of cancer by brachytherapy, with low-dose rates. Each small seed is composed of a welded titanium capsule with 0.8 mm diameter and 4.5 mm in length, containing Iodine-125 adsorbed on an internal silver wire. The seeds are implanted in the human prostate to irradiate the tumor and treat the cancerous cells. The technology to automate the quality control system in the manufacture of lodine-125 seeds consists in developing and associate mechanical parts, electronic components and pneumatic circuits to control machines and processes. The automation technology for Iodine-125 seed production developed in this work employs programmable logic controller （PLC）, step motors, drivers of control, electrical-electronic interfaces, photoelectric sensors, interfaces of communication and software development. Industrial automation plays an important role in the production of Iodine-125 seeds, with higher productivity and high standard of quality, facilitating the implementation and operation of processes with good manufacturing practices （GMP）. Nowadays, the Radiation Technology Centre at IPEN-CNEN/SP imports and distributes 36,000 lodine-125 seeds per year for clinics and hospitals in the whole country. However, the Brazilian potential market is of 8,000 lodine-125 seeds per month. Therefore, the local production of these radioactive seeds has become a priority for the Institute, aiming to reduce the price and increase the supply to the population in Brazil.展开更多
This paper empirically evaluates container terminal service attributes. The methodology proposed focuses on statistical control, Based on the concept of service segmentation, the authors employed control charts to cla...This paper empirically evaluates container terminal service attributes. The methodology proposed focuses on statistical control, Based on the concept of service segmentation, the authors employed control charts to classify container terminal services. The purpose of control charts is to allow simple detection of events that are indicative of actual process change. This simple decision can be difficult where the process characteristic is continuously varying, the control chart provides statistically objective criteria of change. When change is detected and considered good its cause should be identified and possibly become the new way of working, where the change is bad then its cause should be identified and eliminated. Both theoretical and practical implications of the research findings are discussed in this paper.展开更多
基金supported by the National S&T Major Project of China(2018ZX09201011-003)the National Project for Standardization of Chinese Materia Medica(ZYBZH-C-GD-04).
文摘Carbon quantum dots(CQDs)are fluorescent carbon nanomaterials that have been applied to biology,medicine,and optoelectronics,owing to their significant advantages such as simple synthesis methods,low cost,and widely available sources of raw synthesis materials.This review summarizes CQD preparation methods,which include hydrothermal and microwave-assisted synthesis methods,as well as separation methods such as centrifugation,dialysis,and filtration.Additionally,we review the application of CQDs in the detection of active ingredients,primarily phenolic compounds,in traditional Chinese medicine.We also discuss the quenching mechanism of CQD fluorescence using the active ingredients of traditional Chinese medicine.Limitations such as insufficient test selectivity,weak fluorescence intensity,and an unclear quantitative relationship between preparation methods and properties should be resolved for the efficient use of CQDs to detect active ingredients in Chinese medicine.
文摘Product quality and operation cost control obtain increasing emphases in modern chemical system engineering. To improve the fault detection power of the partial least square (PLS) method for quality control, a new QRPV statistic is proposed in terms of the VP (variable importance in projection) indices of monitored process variables, which is significantly advanced over and different from the conventional Q statistic. QRPV is calculated only by the residuals of the remarkable process variables (RPVs). Therefore, it is the dominant relation between quality and RPV not all process variables (as in the case of the conventional PLS) that is monitored by this new VP-PLS (VPLS) method. The combination of QRPV and T2 statistics is applied to the quality and cost control of the Tennessee Eastman (TE) process, and weak faults can be detected as quickly as possible. Consequently, the product quality of TE process is guaranteed and operation costs are reduced.
基金support from the Administration of Traditional Chinese Medicine of Hunan Province(201673)Hunan Province Universities 2011 Collaborative Innovation Center of Protection and Utilization of Hu-xiang Chinese Medicine Resources(HXZY-2015-005 and HXZY-2015-012)+1 种基金the State Key Subject of TCM Diagnostics in Hunan University of Chinese Medicine(2015ZYZD06)Hunan Provincial Key Laboratory of Dong Medicine(2015TP1020-02)
文摘Aquilaria sinensis(Thymelaeaceae)is widely cultivated in southern China for its significant medicinal usage.The resinous wood,the most used part of the plant as traditional Chinese medicine(TCM),locally called“Chen Xiang(沉香)”or Chinese agarwood,has been traditionally used for the treatment of circulatory disorders,abdominal pain,vomiting,and dyspnea.Till date,over 249 compounds have been isolated and identified from this plant.A range of bioactivities,including α-glucosidase inhibitory effects,anti-inflammatory,cytotoxicity,neuroprotective,anti-neuroinflammatory,antimicrobial and acetylcholinesterase inhibitory effects,along with some of the pharmacological mechanisms have been reported for the pure compounds or extracts of Aquilaria sinensis.For the purpose of quality control and clinical safety of drug usage,modern analytical instruments and chemical analysis methods have been applied for analyses of Aquilaria sinensis.In order to comprehensively understand the medicinal application and to fully utilize the plant,a literature search on the herb based on databases including SciFinder,Web of Science,Pubmed,Google Scholar and others was performed and the information regarding to the phytochemistry investigations,pharmacological studies and quality control was summarized in this paper.
文摘Sequential chemical extraction procedure has been widely used to partition particulate trace metals into various fractions and to describe the distribution and the statue of trace metals in geo environment. One sequential chemical extraction procedure was employed here to partition various fractions of Mn in soils. The experiment was designed with quality controlling concept in order to show sampling and analytical error. Experimental results obtained on duplicate analysis of all soil samples demonstrated that the precision was less than 10%(at 95%confidence level). The accuracy was estimated by comparing the accepted total concentration of Mn in standard reference materials (SRMs) with the measured sum of the individual fractions. The recovery of Mn from SRM1 and SRM2 was 94.1%and 98.4%, respectively. The detection limit, accuracy and precision of the sequential chemical extraction procedure were discussed in detailed. All the results suggest that the trueness of the analytical method is satisfactory.
基金supported by the National Natural Science Foundation of China(Grant No.41630754)the State Key Laboratory of Cryospheric Science(SKLCS-ZZ-2017)CAS Key Technology Talent Program and Open Foundation of State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering(2017490711)
文摘High-resolution ice core records covering long time spans enable reconstruction of the past climatic and environmental conditions allowing the investigation of the earth system's evolution. Preprocessing of ice cores has direct impacts on the data quality control for further analysis since the conventional ice core processing is time-consuming, produces qualitative data, leads to ice mass loss, and leads to risks of potential secondary pollution. However, over the past several decades, preprocessing of ice cores has received less attention than the improvement of ice drilling, the analytical methodology of various indices, and the researches on the climatic and environmental significance of ice core records. Therefore, this papers reviews the development of the processing for ice cores including framework, design as well as materials, analyzes the technical advantages and disadvantages of the different systems. In the past, continuous flowanalysis(CFA) has been successfully applied to process the polar ice cores. However, it is not suitable for ice cores outside polar region because of high level of particles, the memory effect between samples, and the filtration before injection. Ice core processing is a subtle and professional operation due to the fragility of the nonmetallic materials and the random distribution of particles and air bubbles in ice cores, which aggravates uncertainty in the measurements. The future developments of CFA are discussed in preprocessing, memory effect, challenge for brittle ice, coupling with real-time analysis and optimization of CFA in the field. Furthermore, non-polluting cutters with many different configurations could be designed to cut and scrape in multiple directions and to separate inner and outer portions of the core. This system also needs to be coupled with streamlined operation of packaging, coding, and stacking that can be implemented at high resolution and rate, avoiding manual intervention. At the same time, information of the longitudinal sections could be scanned andidentified, and then classified to obtain quantitative data. In addition, irregular ice volume and weight can also be obtained accurately. These improvements are recorded automatically via user-friendly interfaces. These innovations may be applied to other paleomedias with similar features and needs.
基金Supported by the National Natural Science Foundation of China(61590924,61673273,61521063)
文摘Exergy indicates the maximal energy that can do work effectively. Different from optimization of product quality or calculation of generic energy conservation in most previous studies, the application of exergy analysis and exergy cost optimization in petrochemical industry is of great economic and environmental significance. Based on the main fractionator in Jiujiang Petrochemical Complex No. 2 FCCU, an enhanced exergy cost optimization under different operating conditions by adjusting set points of temperature and valves opening degree for flow control is studied in this paper in order to reduce exergy cost and improve the quality of energy. A steadystate optimization algorithm to enhance exergy availability and an objective function comprehensively considering exergy loss are proposed. On the basis of ensuring the quality of petroleum products, the economic benefits can be improved by optimizing the controllable variables due to the fact that exergy cost is decreased.
文摘To minimize losses between harvest and retail display, a system is needed to track temperature and RH exposure of fresh produce and predict its quality at each step of the distribution chain. With accurate models, such system could （1） identify problematic situations before losses occur; （2） become a management tool for decision makers; and （3） help quantify the real impact of individual inappropriate conditions. A project was initiated to develop models required for such a decision system. Because the data required to develop models were not available for most fruit and vegetables, a series of storage trials was planned for measuring changes in physiological and microbial quality, and development of physiological disorders and/or diseases, as a function of time, temperature and RH. To meet this objective, controlled environment mini-chambers were designed, built and instrumented for measuring the effect of traceable environmental conditions encountered during storage and transportation of fresh horticultural produce of similar size and shape as tomato. Detailed design and performance evaluation of these mini-chambers are presented.
文摘The objective of this work is to develop an automation system for quality control （QC） in the production of Iodine-125 sealed sources, after undergoing the process of laser beam welding （LBW）. These sources, also known as Iodine-125 seeds are used, successfully, in the treatment of cancer by brachytherapy, with low-dose rates. Each small seed is composed of a welded titanium capsule with 0.8 mm diameter and 4.5 mm in length, containing Iodine-125 adsorbed on an internal silver wire. The seeds are implanted in the human prostate to irradiate the tumor and treat the cancerous cells. The technology to automate the quality control system in the manufacture of lodine-125 seeds consists in developing and associate mechanical parts, electronic components and pneumatic circuits to control machines and processes. The automation technology for Iodine-125 seed production developed in this work employs programmable logic controller （PLC）, step motors, drivers of control, electrical-electronic interfaces, photoelectric sensors, interfaces of communication and software development. Industrial automation plays an important role in the production of Iodine-125 seeds, with higher productivity and high standard of quality, facilitating the implementation and operation of processes with good manufacturing practices （GMP）. Nowadays, the Radiation Technology Centre at IPEN-CNEN/SP imports and distributes 36,000 lodine-125 seeds per year for clinics and hospitals in the whole country. However, the Brazilian potential market is of 8,000 lodine-125 seeds per month. Therefore, the local production of these radioactive seeds has become a priority for the Institute, aiming to reduce the price and increase the supply to the population in Brazil.
文摘This paper empirically evaluates container terminal service attributes. The methodology proposed focuses on statistical control, Based on the concept of service segmentation, the authors employed control charts to classify container terminal services. The purpose of control charts is to allow simple detection of events that are indicative of actual process change. This simple decision can be difficult where the process characteristic is continuously varying, the control chart provides statistically objective criteria of change. When change is detected and considered good its cause should be identified and possibly become the new way of working, where the change is bad then its cause should be identified and eliminated. Both theoretical and practical implications of the research findings are discussed in this paper.
