铝板带箔冷轧机MFC质量流控制系统研究应用

随着铝加工行业供给侧改革和快速升级转型,电子铝箔以高性能高质量为进一步发展目标,对铝板带箔轧制设备高精度自动控制能力和数字化智能控制能力提出了更高的要求,更加关注于铝板带箔的厚度控制精度和控制能力,本文针对铝板带箔轧制过程中厚差瞬间突跳、低频厚差波动和高频厚差振荡的技术问题,对铝箔冷轧机厚度控制系统进行了较为深入的研究和总结,研究设计了铝板带箔冷轧机MFC质量流控制系统,并在我国某高新技术企业获得了成功的工程应用。有效提升了铝板带箔轧制过程中厚差控制精度。

一种新型控制方式在森基米尔轧机控制系统中的应用

本文对森基米尔轧机在带钢轧制过程中厚度控制进行了分析,针对轧制0.35mm及以上规格带钢时采用传统AGC进行控制,并使用不同的控制组合方式,厚度控制效果良好,在轧制0.35mm以下厚度薄规格带钢过程中,产生了厚度波动问题,为解决该问题,使用速度质量流控制方式,取得了较好的厚度控制效果。

Removal of Lead Ions from Ginseng Ethanol Extracts by Dynamic Adsorption in a Fixed-bed Column

The removal of lead from ginseng ethanol extracts by a fixed-bed column filled with an adsorbent bearing amine and carboxyl groups was investigated. The Pb2+ content was determined by inductively coupled plasma mass spectrometry. When the flowrate increased from 0.12 to 0.34 ml·min-1 , the column exhibited a marked increase in percentage of lead removal from 54.9% to 92.3%. Further increase in the flowrate did not bring evident changes to the lead removal, whereas an increase in the temperature could reinforce adsorption further, suggesting that the adsorption process was controlled by external film diffusion below the flowrate of 0.34 ml·min-1 , and by the intraparticle pore diffusion of lead ions when the flowrate exceeded it. A low remaining lead amount in extracts such as 0.11 mg·kg-1 (extracts powder) was achieved. The adsorbents also adsorbed effective constituents to some extent. But 88% of constituents adsorbed were taken off using a 70% ethanol aqueous solution.

Enhanced exergy cost optimization of operating conditions in FCCU main fractionator

Exergy indicates the maximal energy that can do work effectively. Different from optimization of product quality or calculation of generic energy conservation in most previous studies, the application of exergy analysis and exergy cost optimization in petrochemical industry is of great economic and environmental significance. Based on the main fractionator in Jiujiang Petrochemical Complex No. 2 FCCU, an enhanced exergy cost optimization under different operating conditions by adjusting set points of temperature and valves opening degree for flow control is studied in this paper in order to reduce exergy cost and improve the quality of energy. A steadystate optimization algorithm to enhance exergy availability and an objective function comprehensively considering exergy loss are proposed. On the basis of ensuring the quality of petroleum products, the economic benefits can be improved by optimizing the controllable variables due to the fact that exergy cost is decreased.

Dysfunctional Audit Behaviour： The Effects of Employee Performance, Turnover Intentions and Locus of Control

Dy Ov sfunctional audit behaviour （DAB） and staff turnover are associated with decreased audit quality （Public ersight Board, 2000）. This study develops and tests a theoretical model that turnover intentions and locus of control as antecedents of attitudes toward DAB survey results from 225 auditors support the theoretical model identifies employee performance, Using a path analysis technique,

The ECT System for RAON＇S Cavities

The ECT （eddy current test） system is in use for Nb surface quality control in many laboratories. This system can inspect Nb surthce quickly using high resolution probe. The ECT system for RAON＇s cavity was made with these features： it has a 3-axis acting probe movenlent system, it can inspect a big size of Nb sheet, which is 1,200 mm × 365 mm and it contains the analysis program that can show the result as a 2D and 3D images as well as the relative figure of the surface level. The standard sample was made with various sizes of defects using the same Nb sheet that was used to make RISP （Rare Isotope Science Project） cavity. The ECT system conditioning was carried out to optimize the ECT operation on the frequency of which the range is from 300 KHZ to 2 MHz. The result of 900 KHZ showed the strongest signal. The conditioning experiment on other parameter will be carried out in the near future.

Characterization of turbulent flux transfer over a Gobi surface with quality-controlled observations

This study evaluates the spatial distributions in the quality of momentum and sensible heat fluxes,and determines the turbulent transfer characteristics with quality-controlled observations.The research is based on raw turbulence data collected over a Gobi surface in the Dunhuang area in June 2004.The results indicate that part of the momentum fluxes are of poor quality in the daytime and nighttime.The poor quality of the momentum fluxes in the daytime is mainly attributed to the development of turbulence.The footprint reveals that,in general,the momentum fluxes and sensible heat fluxes can be measured well in the east and west upwind sectors under unstable conditions.The relationship between the non-dimensional standard deviation of the wind components and atmospheric stability follow the "1/3 power law",which supports the Monin-Obukhov similarity theory.Moreover,this study identifies a clear disturbance in the measurements surrounding the Gobi surface.The momentum roughness length of z0m=0.59 mm is determined after excluding such disturbance,and the additional resistance during the daytime is proposed to be an average of 3.1,although its actual value is highly scattered.This study discusses the applicability of several thermodynamic parameterization schemes for the Gobi surface.The results show that the scheme κB-1=3.1 can represent well the summer diurnal turbulent heat transfer.

On the atmospheric movement and the imbalance of observed and calculated energy in the surface layer

Based on existing researches,here we theoretically summarized the characteristics of the atmospheric movement and turbulent transport of energy and substance in the surface layer as well as the ideal and the actual models for the turbulent transport.Then,using the data observed with eddy covariance at the semiarid climate and environment monitoring station(SACOL) in Lanzhou University from May to October during four consecutive years(September 2006-August 2010),we conducted a detailed analysis of the turbulent transport in the surface layer,through introducing the relative vertical turbulence intensity to characterize the turbulence strength,RIw=wn(wn+U),and also by adopting the method for controlling data quality at different levels.Our conclusions are:(1) The turbulent transport of energy and substance in the surface layer must obey the law of conservation of energy and the law of conservation of matter,the observed and calculated energy in the surface layer must be balanced,or closed in theory,but the actual observed and calculated energy just approximates the ideal in some degree and is difficult to achieve the energy balance.(2) The energy closure rate depends much on the atmospheric state in the surface layer,and the energy closure rate increases generally with the relative vertical turbulence intensity.(3) By the way of controlling data quality at different levels,it is found that the degree of data quality control can affect the closure rate,but it does not change the fact that the energy closure rate depends on the atmospheric state.(4) The calculation method of surface soil heat flux can affect energy closure rate,but does not change its dependence on the atmospheric state.

Investigation on 3D flow field induced by a plasma actuator with serrated electrode

This paper presents an experimental investigation on flow field induced by a dielectric barrier discharge(DBD) plasma actuator with serrated electrodes in still air to further improve its flow control effectiveness. For comparison, the actuator with widely used linear electrodes was also studied. Experiments were carried out using 2D particle image velocimetry. Particular attention was given to the flow topology, discharge phenomenon, and vortex formation mechanism. Results showed that a 2D wall jet was induced by the linear actuators, whereas the plasma actuators with serrated electrode introduced a series of streamwise vorticities, which might benefit flow control(e.g., enhancing the momentum transport in the separated boundary flow). In addition, the mechanism of 3D flow topology induced by the serrated DBD actuator was analyzed in detail.

Spatial distribution of 10m firn temperature in the Antarctic Ice Sheet

A database of Antarctic 10 m firn temperature was constructed using available borehole temperature measurements with data quality control to extend knowledge of Antarctic climate. Slopes from a high-resolution digital elevation model and the main ice divide were used to delineate main drainage sectors across Antarctica. In each drainage sector, a quantitative relationship between temperature and latitude, longitude and altitude was established using available tim temperature data. Quantitative relationships incorporating other factors affecting Antarctic air temperature such as atmospheric circulation and small-scale to- pography were used to derive a 10-km resolution grid map of surface temperature. The resulting temperature patterns presented a reasonable depiction of both large and small-scale variations in Antarctic 10 m firn temperature. This map is useful for many spatial variation studies, Antarctic ice sheet models, and comparison with satellite-derived temperature data and outputs of atmospheric general circulation models.