修正的ECMWF质量通量积云参数化方案的预报试验

用一个有限区域业务预报模式，以１９９５年７—８月西北地区几次大范围的降水天气过程为试验个例，对经过修改的ＥＣＭＷＦ质量通量积云参数化方案和模式中的原Ｋｕｏ型积云参数化方案进行了共１３例４８ｈ的批量对比预报试验。结果显示：质量通量方案能给出比Ｋｕｏ型方案更合理的积云降水落区；质量通量方案对模式预报≥１０．０ｍｍ的降水有一定的改进。

Numerical Simulation of CO_2 Concentrations in East Asia with RAMS-CMAQ

The regional air quality modeling system RAMS-CMAQ(Regional Atmospheric Modeling System and Models-3 Community Multi-scale Air Quality) was developed by incorporating a vegetation photosynthesis and respiration module(VPRM) and used to simulate temporal-spatial variations in atmospheric CO2 concentrations in East Asia,with prescribed surface CO2 fluxes(i.e.,fossil fuel emission,biomass burning,sea-air CO2 exchange,and terrestrial biosphere CO2 flux).Comparison of modeled CO2 mixing ratios with eight ground-based in-situ measurements demonstrated that the model was able to capture most observed CO2 temporal-spatial features.Simulated CO2 concentrations were generally in good agreement with observed concentrations.Results indicated that the accumulated impacts of anthropogenic emissions contributed more to increased CO2 concentrations in urban regions relative to remote locations.Moreover,RAMS-CMAQ analysis demonstrates that surface CO2 concentrations in East Asia are strongly influenced by terrestrial ecosystems.

A Reynolds mass flux model for gas separation process simulation:Ⅰ. Modeling and validation

Separation process undertaken in packed columns often displays anisotropic turbulent mass diffusion. The anisotropic turbulent mass diffusion can be characterized rigorously by using the Reynolds mass flux(RMF) model.With the RMF model, the concentration and temperature as well as the velocity distributions can be simulated numerically. The modeled Reynolds mass flux equation is adopted to close the turbulent mass transfer equation,while the modeled Reynolds heat flux and Reynolds stress equations are used to close the turbulent heat and momentum transfer equations, so that the Boussinesq postulate and the isotropic assumption are abandoned. To validate the presented RMF model, simulation is carried out for CO2 absorption into aqueous Na OH solutions in a packed column(0.1 m id, packed with 12.7 mm Berl saddles up to a height of 6.55 m). The simulated results are compared with the experimental data and satisfactory agreement is found both in concentration and temperature distributions. The sequel Part II extends the model application to the simulation of an unsteady state adsorption process in a packed column.

Sand flux and wind profiles in the saltation layer above a rounded dune top

The near-bed airflow and the movement of sand dune sediments by wind are fundamental dune geomorphological processes.This research measured the wind profiles and sand mass flux on the rounded top of a transverse dune at the southern edge of the Tengger Desert to examine how to best predict the vertical profile of sand flux.This work also tested the accuracy of previously developed models in predicting the apparent roughness length during saltation.Results show that mass flux vertical distribution over the dune top is underestimated by an exponential function,overestimated by a power function,but closely matches the predictions made using the LgstcDoseRsp function.Given suitable values ofα,βandγaccording to the grain size composition,S?rensen equation with the peaked shape of the mass transport curve will well predict the dimensionless mass flux qg/ρu*3against dimensionless shear velocity u*/u*t.The modified Charnock model works best of the previously published models tested,with an R2of 0.783 in predicting the enhanced roughness over the moving sand surface,as opposed to an R2of0.758 for the Owen model and an R2of 0.547 for the Raupach model.For the rounded dune top in this study,C m=0.446±0.016.

Visualization on Flow Patterns during Condensation of R410A in a Vertical Rectangular Channel

The visualization experiments on HFC R410A condensation in a vertical rectangular channel （14.34mm hydraulic diameter, 160mm length） were investigated. The flow patterns and heat transfer coefficients of condensation in the inlet region were presented in this paper. Better heat transfer performance can be obtained in the inlet region, and flow regime transition in other regions of the channel was also observed. Condensation experiments were carried out at different mass fluxes （ from 1.6 kg/h to 5.2 kg/h） and at saturation temperature 28~ C. It was found that the flow patterns were mainly dominated by gravity at low mass fluxes. The effects of interfacial shear stress on condensate fluctuation are significant for the film condensation at higher mass flux in vertical flow, and con- sequently, the condensation heat transfer coefficient increases with the mass flux in the experimental conditions, The drop formation and growth process of condensation were also observed at considerably low refrigerant vapor flow rate.