La was partially substituted by Ce with the aim of improving the electrochemical hydrogen storage performances ofLa1–xCexMgNi3.5Mn0.5 (x=0, 0.1, 0.2, 0.3, 0.4) alloys, and melt spinning technology was adopted to fabr...La was partially substituted by Ce with the aim of improving the electrochemical hydrogen storage performances ofLa1–xCexMgNi3.5Mn0.5 (x=0, 0.1, 0.2, 0.3, 0.4) alloys, and melt spinning technology was adopted to fabricate the alloys. Theidentification of XRD and SEM reveals that the experimental alloys consist of a major phase LaMgNi4 and a secondary phase LaNi5.The growth of spinning rate results in that the lattice constants and cell volume increase and the grains are markedly refined. Theelectrochemical measurement shows that the as-cast and spun alloys can obtain the maximum discharge capacities just at the firstcycle without any activation needed. With the increase of spinning rate, the discharge capacities of the alloys first increase and thendecline, whereas their cycle stabilities always grow. Moreover, the electrochemical kinetic performances of the alloys first increaseand then decrease with spinning rate growing.展开更多
Nanocrystalline and amorphous LaMg11Ni+x%Ni(x=100,200,mass fraction)alloys were synthesized by mechanicalmilling.The electrochemical hydrogen storage properties of the as-milled alloys were tested by an automatic galv...Nanocrystalline and amorphous LaMg11Ni+x%Ni(x=100,200,mass fraction)alloys were synthesized by mechanicalmilling.The electrochemical hydrogen storage properties of the as-milled alloys were tested by an automatic galvanostatic system.The gaseous hydrogen absorption and desorption properties were investigated by Sievert’s apparatus and differential scanningcalorimeter(DSC)connected with a H2detector.The results indicated that increasing Ni content significantly improves the gaseousand electrochemical hydrogen storage performances of the as-milled alloys.The gaseous hydrogen absorption capacities andabsorption rates of the as-milled alloys have the maximum values with the variation of the milling time.But the hydrogen desorptionkinetics of the alloys always increases with the extending of milling time.In addition,the electrochemical discharge capacity andhigh rate discharge(HRD)ability of the as-milled alloys both increase first and then decrease with milling time prolonging.展开更多
At the molecular mechanic level, the capability of a set of 24 molecular cage-like structures, the spherophanes, to store hydrogen molecules has been studied. Two main factors have been found to govern their storage c...At the molecular mechanic level, the capability of a set of 24 molecular cage-like structures, the spherophanes, to store hydrogen molecules has been studied. Two main factors have been found to govern their storage capacity： the volume of their cavity and the potential energy barriers at the different openings at the surface of the cage. Calculations have shown that 13H2 molecules could be stored inside the thiaspherophane, Th4S, whose mean radius is 10A and the resulting complex （H2）I3@Th4S is found to be stable. The results show that it would be very difficult to store more than 2H2 inside the smallest spherophane, Sp4, whose mean radius is 7.7A. The mean intermolecular distance Hz-Hz and the mean bond length H-H have been found to decrease when the number of imprisoned hydrogen molecules increases. It has also been found that the encapsulated H2 molecules form clusters of different symmetries on which the formation energy depends strongly. Even with 13H2 molecules inside Th4S, the weight percentage is still small, 2.57%. The largest obtained wt% is 3.22% in the case of Th5S（CH3）10.展开更多
基金Projects(51371094,51471054)supported by the National Natural Science Foundation of China
文摘La was partially substituted by Ce with the aim of improving the electrochemical hydrogen storage performances ofLa1–xCexMgNi3.5Mn0.5 (x=0, 0.1, 0.2, 0.3, 0.4) alloys, and melt spinning technology was adopted to fabricate the alloys. Theidentification of XRD and SEM reveals that the experimental alloys consist of a major phase LaMgNi4 and a secondary phase LaNi5.The growth of spinning rate results in that the lattice constants and cell volume increase and the grains are markedly refined. Theelectrochemical measurement shows that the as-cast and spun alloys can obtain the maximum discharge capacities just at the firstcycle without any activation needed. With the increase of spinning rate, the discharge capacities of the alloys first increase and thendecline, whereas their cycle stabilities always grow. Moreover, the electrochemical kinetic performances of the alloys first increaseand then decrease with spinning rate growing.
基金Projects(51161015,51371094,51471054) supported by the National Natural Science Foundation of China
文摘Nanocrystalline and amorphous LaMg11Ni+x%Ni(x=100,200,mass fraction)alloys were synthesized by mechanicalmilling.The electrochemical hydrogen storage properties of the as-milled alloys were tested by an automatic galvanostatic system.The gaseous hydrogen absorption and desorption properties were investigated by Sievert’s apparatus and differential scanningcalorimeter(DSC)connected with a H2detector.The results indicated that increasing Ni content significantly improves the gaseousand electrochemical hydrogen storage performances of the as-milled alloys.The gaseous hydrogen absorption capacities andabsorption rates of the as-milled alloys have the maximum values with the variation of the milling time.But the hydrogen desorptionkinetics of the alloys always increases with the extending of milling time.In addition,the electrochemical discharge capacity andhigh rate discharge(HRD)ability of the as-milled alloys both increase first and then decrease with milling time prolonging.
文摘At the molecular mechanic level, the capability of a set of 24 molecular cage-like structures, the spherophanes, to store hydrogen molecules has been studied. Two main factors have been found to govern their storage capacity： the volume of their cavity and the potential energy barriers at the different openings at the surface of the cage. Calculations have shown that 13H2 molecules could be stored inside the thiaspherophane, Th4S, whose mean radius is 10A and the resulting complex （H2）I3@Th4S is found to be stable. The results show that it would be very difficult to store more than 2H2 inside the smallest spherophane, Sp4, whose mean radius is 7.7A. The mean intermolecular distance Hz-Hz and the mean bond length H-H have been found to decrease when the number of imprisoned hydrogen molecules increases. It has also been found that the encapsulated H2 molecules form clusters of different symmetries on which the formation energy depends strongly. Even with 13H2 molecules inside Th4S, the weight percentage is still small, 2.57%. The largest obtained wt% is 3.22% in the case of Th5S（CH3）10.
