期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
金属板坯道次间变进给率普通旋压方法 被引量:1
1
作者 过海 王进 陆国栋 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2016年第9期1646-1653,共8页
为了解决由固定进给率导致的加工效率和产品质量之间的矛盾,提出针对普通旋压多道次特征的道次间变进给率旋压(VFS)方法.通过建立有限元分析(FEA)模型分析调整道次进给率对应力、应变和旋压力的影响.通过加工实验对VFS的实际效果进行验... 为了解决由固定进给率导致的加工效率和产品质量之间的矛盾,提出针对普通旋压多道次特征的道次间变进给率旋压(VFS)方法.通过建立有限元分析(FEA)模型分析调整道次进给率对应力、应变和旋压力的影响.通过加工实验对VFS的实际效果进行验证.结果表明:通过调整道次间的进给率,加工效率提高了14.3%;在保持加工效率不变的情况下,起皱度减少了95%.根据各道次的加工特性,终道次减速能有效抑制起皱,提高产品表面质量;而首道次减速能降低旋压力径向和切向分力. 展开更多
关键词 变进给率 普通旋压 多道次旋压 加工效率 起皱度
下载PDF
基于Dynaform的L形件弯曲工艺参数优化分析 被引量:3
2
作者 缪军 姜天亮 龚红英 《上海工程技术大学学报》 CAS 2018年第3期234-239,共6页
回弹与起皱是弯曲件成形过程中最大的质量问题.以典型的L形件弯曲成形工艺参数为研究对象,设计正交试验,并利用Dynaform有限元分析软件对弯曲件成形过程进行数值模拟,分析压边力变化时长占比、最小压边力、最大压边力以及凹模圆角半径... 回弹与起皱是弯曲件成形过程中最大的质量问题.以典型的L形件弯曲成形工艺参数为研究对象,设计正交试验,并利用Dynaform有限元分析软件对弯曲件成形过程进行数值模拟,分析压边力变化时长占比、最小压边力、最大压边力以及凹模圆角半径对弯曲件成形质量的影响规律.以成形裕度为约束条件,回弹角、起皱波纹度为参考指标,基于数值模拟与极差计算结果,得到弯曲成形最优工艺参数.模拟验证结果为回弹角控制在0.3°以内,波纹度控制在0.773%左右,最大限度地减少了工件形位尺寸误差. 展开更多
关键词 L形件 正交试验 数值模拟 回弹角 起皱波纹
下载PDF
Loading and wrinkling analysis of membrane structures 被引量:4
3
作者 YANG QingShan TAN Feng WANG XiaoFeng 《Science China(Technological Sciences)》 SCIE EI CAS 2011年第10期2597-2604,共8页
Loading analysis,as one of the most crucial procedures in the assessment of safety of the membrane structures,is to check the adequacy of structural stiffness and the extent of membrane stress and deformation,thus ens... Loading analysis,as one of the most crucial procedures in the assessment of safety of the membrane structures,is to check the adequacy of structural stiffness and the extent of membrane stress and deformation,thus ensuring the structural stability and avoiding the wrinkling of membrane structures.In this paper,the analysis procedures are presented and the wrinkling of membrane structure,representing a major behavioral performance of the structure,is included with the modified constitutive relationship method.As for the judgment of the membrane wrinkling,the principal stress-strain criteria are incorporated.Thereafter,an integrated algorithm is developed,in which the Newton-Raphson method and updated Lagrange formulation are adopted.With the proposed algorithm,two fabric roof structures are analyzed.Results show that the presented method is feasible and reliable. 展开更多
关键词 membrane structure loading analysis wrinkling analysis modified constitutive relationship
原文传递
Spontaneous wrinkling of layer-by-layer assembled polyelectrolyte films for humidity-responsive superhydrophobicity
4
作者 Yang Li Xiang Li +2 位作者 Wenjin Guo Mengchun Wu Junqi Sun 《Science China Chemistry》 SCIE EI CAS CSCD 2016年第12期1568-1573,共6页
The fabrication of smart films with reversible wettability enabled by the stimulus-induced morphology changes has attracted growing interest but remains a challenge. Here we report a smart film that can reversibly cha... The fabrication of smart films with reversible wettability enabled by the stimulus-induced morphology changes has attracted growing interest but remains a challenge. Here we report a smart film that can reversibly changes its wettability between transparent hydrophobicity to translucent superhydrophobicity through the humidity-induced wrinkling/de-wrinkling process.The film was fabricated by depositing hydrophobic SiO2 nanoparticles(NPs) on poly(acrylic acid)(PAA)/poly(allylamine hydrochloride)(PAH) films, followed by partially exfoliating the films from the underlying substrates. The partially exfoliated PAA/PAH film can reversibly wrinkle and de-wrinkle when being alternately subjected to humid and dry environments. The deposition of hydrophobic SiO2 NPs on the wrinkling PAA/PAH film does not hinder the humidity-enabled wrin-kling/de-wrinkling ability of the composite film. The hydrophobic SiO2 NPs and the underlying humidity-wrinkling PAA/PAH film enable the composite film to spontaneously change from hydrophobic and transparent to superhydrophobic and translucent with the rise of environmental humidity. 展开更多
关键词 humidity responsive SUPERHYDROPHOBIC reversible WRINKLE layer-by-layer
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部