Two-dimensional and three-dimensional shock control contour bumps are designed for a supercritical wing section with the aim of transonic wave drag reduction. The supercritical airfoil （NASA SC （02）-0714） is selec...Two-dimensional and three-dimensional shock control contour bumps are designed for a supercritical wing section with the aim of transonic wave drag reduction. The supercritical airfoil （NASA SC （02）-0714） is selected considering the fact that most modern jet transport aircrafts that operate in the transonic flow regime （cruise at transonic speeds） employ supercritical airfoil sections. Here it is to be noted that a decrease in the transonic wave drag without loss in lift would result in an increased lift to drag ratio, which is a key range parameter that can potentially increase both the range and endurance of the aircraft. The major geometric bump parameters such as length, height and span are altered for both the two-dimensional and three-dimensional bumps in order to obtain the optimum location and shape of the bump. Once an optimum standalone three-dimensional bump is acquired, an array of bumps is manually placed spanwise of an unswept supercritical wing and analyzed under fully turbulent flow conditions. Different configurations are tested with varying three-dimensional bump spacing in order to determine the contribution of bump spacing on overall performance. The results show a 14% drag reduction and a consequent 16% lift to drag ratio rise at the design Mach number for the optimum arrangement of bumps along the wing span.展开更多
文摘Two-dimensional and three-dimensional shock control contour bumps are designed for a supercritical wing section with the aim of transonic wave drag reduction. The supercritical airfoil （NASA SC （02）-0714） is selected considering the fact that most modern jet transport aircrafts that operate in the transonic flow regime （cruise at transonic speeds） employ supercritical airfoil sections. Here it is to be noted that a decrease in the transonic wave drag without loss in lift would result in an increased lift to drag ratio, which is a key range parameter that can potentially increase both the range and endurance of the aircraft. The major geometric bump parameters such as length, height and span are altered for both the two-dimensional and three-dimensional bumps in order to obtain the optimum location and shape of the bump. Once an optimum standalone three-dimensional bump is acquired, an array of bumps is manually placed spanwise of an unswept supercritical wing and analyzed under fully turbulent flow conditions. Different configurations are tested with varying three-dimensional bump spacing in order to determine the contribution of bump spacing on overall performance. The results show a 14% drag reduction and a consequent 16% lift to drag ratio rise at the design Mach number for the optimum arrangement of bumps along the wing span.
