异位性皮炎皮损超微电镜下炎性细胞的接触现象

异位性皮炎 (atopic dermatitis, AD). 又称遗传过敏性皮 炎，是与遗传相关的慢性复发性、瘙痒性和过敏性炎症皮肤病。在发病过程中涉及过敏原、炎性细胞、抗体、受体和介质5个环节。其中炎性细胞在整个发病过程中起着关键性作用，它包括肥大细胞、淋巴细胞和巨噬细胞等。从免疫学角度认为这些细胞之间具有互相呈递作用，但其形态学的表现少见报告。本文应用透射电镜观察17例AD患者皮损部位炎性细胞之间的超微病理变化，探讨炎性细胞之间呈递的形态学表现，即细胞接触现象，为进一步研究AD发病机制提供形态学基础。

脑胶质瘤超微结构及组织形态观察39例

目的探讨脑胶质瘤的超微结构特征及组织形态学特征,辅助肿瘤临床分型与鉴别诊断。方法回顾性分析北京市神经外科研究所2012年12月至2019年2月期间诊断的脑胶质瘤患者39例,观察该组患者肿瘤组织的光镜、透射电子显微镜超微病理特征和免疫组织化学检测结果。结果 39例患者中,低级别胶质瘤14例,WHO分级为Ⅱ级,包括星形细胞瘤5例,少枝胶质细胞瘤9例。高级别胶质瘤25例,WHO分级为Ⅲ～Ⅳ级,包括间变型少枝星形胶质细胞瘤10例,胶质母细胞瘤15例。透射电子显微镜下观察星形细胞源性肿瘤细胞形态相对单一,胞质中均含有多少不等的胶质微丝,Rosenthal纤维是毛细胞型星形细胞瘤的特征结构。胶质母细胞瘤核异型明显,异染色质多且分布不均,核内假包涵体多见,细胞器丰富,瘤巨细胞见多量胶质微丝分布。少枝胶质细胞瘤胞质中缺乏胶质微丝,胞突较少,典型特征是细胞膜在细胞一侧呈板层状折叠,或在细胞旁呈同心圆板层排列。结论光镜、免疫组织化学及透射电子显微镜超微病理三者在胶质瘤的基础研究、诊断与预后判定中的作用是互补的。不同胶质瘤的分类与亚型有各自特殊的超微结构特征与免疫特征。

一营养不良型大疱表皮松解症家系的基因突变

目的 :研究一营养不良型大疱表皮松解症家系的基因突变。方法 :用组织病理 ,超微电镜及免疫荧光方法结合临床表现诊断为显性营养不良型大疱表皮松解症 ,采用聚合酶链反应 ,DNA直接测序以及限制性内切酶反应的方法对一营养不良型大疱表皮松解症家系进行基因突变情况的检测。结果 :家系中患者及其父均存在COL7A1基因上第 6 376位的G突变为A ,导致Ⅶ胶原 2 0 88位的甘氨酸被谷氨酸替代 ,而对照的健康人不存在此突变。结论 :G2 0 88E是引起该家系临床病变的特异突变 ,不是多态性变化。

Nature,Characteristics and Uitrastructure Observation of Fibers of Seven Kinds of Special Animals

[Objective]Aimed to study the nature,characteristics and ultrastructure of fibers of Ovis aries and several kinds of special animals.[Method]Wool,cashmere,alpaca,Bactrian camel hairs,rabbit hair,mohair and yak hair were used as the experimental materials,and scanning electron microscopy was used to observe their scale structure.[Result]The rake angle of wool was large with an average of 33.2°,the scale density was 16.2-34.9 scales/mm,the average height of scale was 12.95 μm,and the average thickness was 0.63 μm;the rake angle of cashmere was smaller than wool with an average of 20.6°,the scale density was of 10.3-15.6 scales/mm,the scale distance was large,the average height of scale was 16.09 μm,and the average thickness was 0.46 μm;the average rake angle of alpaca was 34.6°,with the average scale height of 5.85 μm,and average thickness of 0.33 μm;the average rake angle of camel hair was 33.5°,with the average scale height of 11.30 μm and average thickness of 0.37 μm;the average rake angle of rabbit hair was 31.2°,with average scale height of 7.03 μm and average thickness of 0.36 μm;the rake angle value of mohair was between wool and cashmere,and the average of which was 23.7°,the scale density value was also between the wool and cashmere,with the average scale height of 15.82 μm and average thickness of 0.61 μm;the average rake angle yak hair was 33.2°,with the average height of 9.08 μm and average thickness of 0.46 μm.[Conclusion]The results of this study could provide a basis for the identification of different fiber types.

Electron Microscopic Studies on the Silver-stained Nucleolar Cycle of Physarum polycephalum

The dynamic changes of nucleolar ultrastructure in the cell cycle of Physarum polycephalum Schw. were studied by an en bloc silver-staining method. The results showed that the nucleolus was large in size and situated in the center of the nucleus in late G(2)-phase, and the fibrillar centers, dense fibrillar components and granular components could be observed in the nucleolus. During prophase, the nucleolus moved towards the periphery of the nucleus and in late prophase disintegrated near the nuclear envelope. in metaphase, the disintegrated nucleolar components were dispersed in masses and located at the periphery of the chromosomal region of the nucleus. No specifically silver-stained area and argentophilic protein sheath were observed on the chromosomes, but there were some big dispersed silver particles within the chromosomes. During telophase the nucleolar components moved towards the two poles along with the chromosomes and co-existed with the decondensing chromatin in daughter nuclei. The nucleolar components then gradually converged with one another and separated from the chromatin. A big nucleolus was formed in the nucleus about 120 min after the completion of mitosis.

Scanning Electron Microscopy of Antennae of Aphidoletes aphidimyza (Diptera: Cecidomyiidae)

The morphology of antennae of Aphidoletes aphidimyza was observed with a scanning electron microscope. The results showed that both male and female were fourteen segmented, the male was approximately 2000 μm and the female was 1050μm. Six types of sensillae on the antenna were observed, viz. chaetica （Ch）, trichoidea （Tr）, basiconica （Ba）, cavity （Ca）, styloid （St） and circumfila （Ci） on the antennae of A. aphidimyza. Sensillae Ch had a long external-process, with a base surrounded by membranous sockets and a length of about 67.5 μm. Sensillae Tr were distally curved and inserted into a depression, 61.0μm long. Sensillae Ba were peg-like and 4.7μm long on the antennae. Sensillae Ca were pit-like in appearance and the diameter of the pit was 1.2μm. Sensilla St was found on the second sub-segment flagellum of the male antennae. The length of the sensilla was about 21 μm and the diameter was 1.5μm. The circurnfila, which are a unique type of sensilla found only on cecidomyiid antennae, formed loops around each of the antennal sub-segments, and were attached to the surface by a series of stalks. Sensilla St was only present on male antenna. The number of Ba and Tr was almost the same in both sexes. There were more Sensilla Ca on the male antenna than on the female, while there was more Ch on the female.

Manufacturing of SEM and TEM Samples for Oocyte

[ Objective] The research aimed to explore the manufacturing methods of scanning electron microscope （SEM） and transmission electron microscopy （TEM） for oocyte and provide technical support for related research. [ Method] Based on GV-and MII-stage oocytes, samples of SEM and TEM were prepared respectively, then ultrastructure changes were observed. [ Result] The results showed that the method needed few samples, keep intact cell morphology and can see clear ultrastructure. [Conclusion] The method is suitable for ultrastructural observation of oocyte.

Effect of ultrasonic field on microstructure and mechanical properties of as-cast 7085 aluminum alloy

The effect of an ultrasonic field on the microstructure and mechanical properties of 7085 aluminum alloy during solidification was investigated by optical microscopy, Vickers hardness test, tensile test, scanning electron microscopy （SEM） with energy dispersive X-ray spectrometry, and electron probe micro-analysis （EPMA）. The results showed that the grains of aluminum alloy were significantly refined and secondary phases were dispersed and distributed uniformly at the grain boundaries, due to ultrasonic treatment （UST）. By EPMA, it was observed that the distribution of the main elements A1, Zn, Mg and Cu was more homogeneous in alloys with UST, than in alloys without UST. The mechanical properties of the aluminum alloy also significantly improved. As demonstrated by the SEM fractography of the fractured faces of several castings, fracture of the unrefined specimens occurred in a brittle manner, whereas the cracks of the refined specimens showed quasi-cleavage fracture.

Improving performance of recycled aggregate concrete with superfine pozzolanic powders

Phosphorous slag （PHS）, ground granulated blast-furnace slag （GGBS） and fly ash （FA） were used as replacements of Portland cement to modify the microstruc^xe of recycled aggregate concrete （RAC）. A new manufacturing method named ＂W3T4＂ was proposed to improve the performances of interracial transition zone （ITZ） between recycled aggregate and mortar. The mechanical properties and the durability of RAC were tested, which show that this new manufacturing method improves the properties of RAC, and the GGBS with finest size makes a great contribution to the performance of RAC due to its better filling effect and much earlier pozzolanic reaction. Combined with GGBS, the effects of PHS on the retardation of setting time can be alleviated and the synergistic effect helps to make a more compact RAC. For the RAC with 25% of the recycled aggregate （RA） replacement and 10% PHS ＋ 10% GGBS additives, the compressive strength increases by 25.4%, but the permeability decreases by 64.3% with respect to the reference concrete made with nature aggregates. The micro-mechanisms of these improvements were investigated by the scanning electron microscope （SEM）. The SEM images show that the new manufacturing method, adding superfine pozzolanic powders and super-plasticizer benefits, makes a much denser ITZ in RAC.

Improvement of cardiac function and reversal of gap junction remodeling by Neuregulin-1β in volume-overloaded rats with heart failure

Objective We performed experiments using Neuregulin-1β （NRG-1β） treatment to determine a mechanism for the protective role derived from its beneficial effects by remodeling gap junctions （GJs） during heart failure （HF）. Methods Rat models of I-IF were established by aortocaval fistula. Forty-eight rats were divided randomly into the HF （HF, n = 16）, NRG-1β trealanent （NRG, n = 16）, and sham operation （S, n = 16） group. The rats in the NRG group were administered NRG-1β （10 μg/kg per day） for 7 days via the tail vein, whereas the other groups were injected with the same doses of saline, Twelve weeks after operation, Connexin 43 （Cx43） expression in single myocytes obtained from the left ventricle was determined by immunocytochemistry. Total protein was extracted from frozen left ventricular tissues for immunoblotting assay, and the ultrastmcture of myocytes was observed by transmission electron microscopy. Results Compared with the HF group, the cardiac fimction of rats in the NRG group was markedly improved, irregular distribution and deceased Cx43 expression were relieved. The ultrastmcture of myocytes was seriously damaged in HF rats, and NRG-1β reduced these pathological damages. Conclusions Short-term NRG-1β treatment can rescue pump failure in experimental models of volume overload-induced HF, which is related to the recovery of GJs structure and the improvement of Cx43 expression.

The ultrastructure of the spermatozoon of Octopus ocellatus Gray, 1849 (Cephalopoda: Octopoda)

Morphology of the spermatozoon of Octopus ocellatus was studied by light, scanning electron, and transmission electron microscopes. Sperm are 600-700 um long, with a large number of granules in diameter about 130 um. Each spermatozoon is composed of a head, neck, and tail. The head is made up of an acrosomal complex anterior to the nucleus. The spiral acrosomal complex consists of an electron-lucent vesicle, lacuna, and an electron-dense acrosomal vesicle. Additionally, the spiral acrosomal vesicle has numerous equidistant striations, and is surrounded by many small granules （20 nm diameter）. A long straight nucleus, which is electron-densed, has a deep posterior concavity, the nuclear vacuole. At the terminal end of the nucleus is a sleeve-like structure with a concave posterior nuclear fossa （PNF）. The neck is short connecting the PNF. The basal body is located in the PNF and gives rise to the axoneme. This structure connects the head, neck, and tail. The tail is divided into a middle piece and a principal piece. The middle piece, having a 9＋9＋2 arrangement, is surrounded by a mitochondrial sheath and terminates by an electron-dense fibrous sheath. The principal piece is the longest part of the sperm with coarse fibers tapering posteriorly. The results of this study shall provide some useful information for artificial breeding of this species.

Ultrastructure of spermatozoa of Bullacta exarata （philippi） and its significance on reproductive evolution and physio-ecological adaptation

The morphology and ultrastructure of Bullacta exarata spermatozoa observed by light and transmission electron microscopy are presented in this paper. The spermatozoon is composed of head with a simple acrosomal complex and an elongated nucleus, and tail with a midpiece, principal piece and an end piece. The midpiece consists of a mitochondrial ring, and the principal piece is composed of axoneme and lateral fin. The structure of 5. exarata spermatozoa differs significantly from that of other gastropods, especially in the lateral fin and the principal piece, which was described scarcely before. A comparison is made between B. exarata and other gastropods, and its significance on reproductive evolution and physio-ecological adaptation is preliminarily discussed.

Effects of low-intensity pulsed ultrasound stimulation on porous hydroxyapatite blocks for posterolateral fusion of lumbar spine in rabbits

he effects of porous hydroxyapatite blocks（PHABs） and an adjunct low-intensity pulsed ultrasound stimulation（LIPUS） on the fusion rate in a rabbit spinal posterolateral fusion（PLF） model were evaluated.Twenty rabbits underwent PLF with autograft and PHABs were randomly assigned to two groups：treated group with 20 min LIPUS daily and untreated control group for 4 weeks until euthanasia.The fused motion segments were subjected to manual palpation,gross observation,and radiographic investigation before histomorphologic and scanning electron microscopic analyses.Statistical differences between the LIPUS group and the control group are found in the fusion rate,bone density gray scale,trabecular bone formation,osteoblast-like cells,chondrocytes and positive expression of BMP-2 and TGF-β1 in the junction zone（significance level p〈0.05）.The results suggest that LIPUS can increase fusion rates and accelerate bone in-growth into PHAB.Hence,PHAB and LIPUS may be used together to increase fusion rates in a rabbit spinal fusion model with a promising extension to human application.

Effects of ultrasonic dispersion on structure of electrodeposited Ni coating on AZ91D magnesium alloy

To obtain the refined electrodeposited nickel layer on AZ91D magnesium alloy,ultrasonic technology was applied in the processes of pre-treatment and electrodeposition.The phases of pre-treatment layer and the nickel coating were analyzed by X-ray diffractometry(XRD)and X-ray photoelectron spectroscopy(XPS),and the microstructure was observed by scanning electron microscopy(SEM).Then,the effects of ultrasonic dispersion on the microstructure of pre-treatment layer and the grain refinement of electrodeposited nickel layer were discussed.The results showed that the pre-treatment electrodeposited Cu-Sn layer with compact microstructure could be synthesized in alkaline copper-tin liquid with ultrasonic agitation,as a result,smooth and refined nickel coating formed on AZ91D magnesium alloy.On the other hand,preferred orientation in the coating decreased because of the refined grains.

Sorption and Diffusion Behavior of Carbon Dioxide into Poly（l-lactic acid） Films at Elevated Pressures

Equilibrium sorption amount, desorption diffusion coefficients and sorption diffusion coefficients of CO2 in poly（l-lactic acid） （PLLA） films at elevated pressures were determined by the gravimetric method, in which the Fick＇s diffusion model was applied to analyze both the desorption and sorption processes. The equilibrium sorption amount of CO2 in PLLA increased with lowering temperature and elevating pressure at the temperature range from 40 to 60 ℃ and pressure from 10^4 to 2x10^4 kPa. Desorption diffusion coefficients were greatly influenced by the equilibrium sorption amount, and they were in the same order of magnitude as the sorption diffusion coefficients. The scan electron microscope （SEM） photos demonstrated that there was no foaming phenomenon of the PLLA film during desorption and sorption processes. The XRD spectra implied that the crystalline degree of PLLA film decreased after CO2 processing. It was concluded that PLLA polymer could be well swollen and plasticized by supercritical CO2.

Esophageal cell proliferation in gastroesophageal reflux disease: Clinical-morphological data before and after pantoprazole

AIM: To evaluate esophageal mucosal defense mechanisms at an epithelial level to establish if pantoprazole treatment can induce ultrastructural healing and improvement in the proliferation activity of the esophageal epithelium in gastroesophageal reflux disease (GERD). METHODS: This was a single-blinded study for pHmonitoring, and histological, ultrastructural and MIB1 immunostaining evaluation. Fifty eight patients with GERD were enrolled and underwent 24 h pH-monitoring and endoscopy. Patients were treated for 12 and 24 mo with pantoprazole. Esophageal specimens were taken for histological and ultrastructural evaluation, before and after the treatment. RESULTS: With transmission electron microscopy, all patients with GERD showed ultrastructural signs of damage with dilation of intercellular spaces (DIS). After 3 mo of therapy the mean DIS values showed asignificant reduction and the mean MIB1-LI values of GERD showed an increase in cell proliferation. A further 3 mo of therapy significantly increased cell proliferation only in the erosive esophagitis (ERD) group. CONCLUSION: Three months of pantoprazole therapy induced ultrastructural healing of mucosal damage in 89% and 93% of ERD and non-erosion patients, respectively. Moreover, long-term pantoprazole treatment may be helpful in increasing the capability for esophageal cell proliferation in GERD, particularly in ERD patients.

Method for grinding and delaminating muscovite

A method of dry grinding muscovite based on the use of knife-mills is reported.It was possible to produce mica with a particle size below 100 and 45μm.After grinding,the samples were submitted to sonication treatment,which promoted delamination of the material.The particle size distribution shows that sonicated mica has more particles in the size range 10-50μm than does non-sonicated mica have. This also indicates a decrease in the average particle size.Characterization of the treated muscovite by scanning electron microscopy revealed a highly delaminated material with a plate-like structure.The products were characterized by chemical analysis and X-ray diffraction,too.This mica has already been used for the synthesis of pearlescent pigments.

Fabrication of Super Hydrophobic Surfaces on Copper by Solution-immersion

Super hydrophobic copper wafer was prepared by means of solution immersion and surface self-assembly methods. Different immersion conditions were explored for the best hydrophobic surface. Scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrometer (EDS) and water contact angle measurements were used to investigate the morphologies, microstructures, chemical compositions and hydrophobicity of the produced films on copper substrates, respectively. Results show that the super hydrophobic surface is composed of micro structure of Cu 7 S 4 . The films present a high water contact angle larger than 150°, a low sliding angle less than 3°, good abrasion resistance and storage stability. The molecular dynamics simulation confirms that N-dodecyl mercaptan molecules link up with Cu 7 S 4 admirably, compared with Cu, which contributes to the stable super hydrophobic surface.

Observation of the Ultrastructure in Syphilitic Chancres

Objective: To study the occurrence and development ofprimary syphilis from a morphological and structural aspect.Method: The ultrastructural pathological changes of syphiliticchancre were examined by transmission electron microscopy(TEM). Results: The pathological changes of syphilitic chancreoccur mainly in the dermal layer, manifested as partialthinning or lysis of the capillary basal membrane,proliferation of capillary endothelial cells, thickening of somecollagen fibers and rupture of collagen fibers surrounding Tpallidum, structural disruption of the axons of terminal nerves,disarrangement of the sheath of the myelinated nerve fiberswith separation of laminae and the attachment of T pallidumon its outer membrane, appearance of slightly swollen Tpallidum in the plasma of the capillary endothelial cells andfibroblasts, and infiltration of neutrophils, macrophages andplasma cells containing T pallidum and its debris frequentlylined by a clear sheath. Conclusion: The pathogenesis and injury of mechanism inprimary syphilis can be explained morphologically by itscharacteristic ultrastructural pathological changes.

Study on high speed tension property of B-grade bulletproof steel

In this paper, the high speed tension experiments have been performed on ultra high strength bulletproof steel. The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of 2.3 mm. The mechanical properties at strain rates of 0.001 s^-1, 0.01 s^-1, 0.1 s^-1 and 1 s^-1 were carried out on MTSS10, while those at higher strain rates of 200 s^-1, 500 s^-1 and i 000 s^-1 were tested on HTM5020 high speed tension tester and Hopkinson bar. The data from the high speed tension experiments were fitted via Johnson-Cook constitutive equation, and the fracture surface of each specimen was analyzed by scanning electron microscope （SEM）. The results indicate that, the shoot resistance capability of bulletproof steel is closely related to its strength, thickness and flow behaviors under high strain rate. The shoot resistance will be improved in the case of higher strength and better matching between strength and elongation. The Johnson-Cook constitutive equation fitted via experimental data provides fundament to numerical simulation. With the increase of strain rate, the size and depth of dimple trend to decrease and the depth of dimple changes less in steel with lower strength and higher elongation. The SEM analysis of fracture aspect is of benefit for further understanding of deformation and fracture mode under high strain rate.