细菌纤维素发酵培养基的优化及超微观结构分析

为了提高细菌纤维素的产量,本研究对一株氧化葡糖杆菌菌株J2液体发酵生产细菌纤维素的培养基进行了优化,并对其代谢的细菌纤维的超微观结构进行了观察。运用Plackett-Burman试验设计法对8个相关影响因素的效应进行了评价,筛选出了有显著效应的3个因素:酵母膏、ZnSO4、无水乙醇,其他5个因素的影响未达到显著水平(P>0.05)。然后采用Box-Behnken的中心组合试验设计和响应面分析方法(RSM)确定了上述三个因素的最佳浓度,并且以棉纤维为对照,运用扫描电镜观察了细菌纤维素的超微观结构,结果表明:菌株J2利用优化后的发酵培养基生产细菌纤维素的产量为11.52g/100mL,是优化前的1.35倍,电镜照片显示细菌纤维素微纤维丝直径<0.1μm,比棉纤维细很多,NaOH处理可以除去纤维网络结构中的菌体。

线粒体H^+-ATPase超分子结构及其催化机制的研究现状

质子泵H^+-ATPase广泛存在于线粒体,叶绿体,异养菌和光合细菌中,是生物体能量转换的核心酶,有极为重要的生理作用。近几年来,对H^+-ATPase的结构、功能和调控机制的研究进展很快,对复合体的组装有了进一步的认识。对H^+-ATPase的主要亚基已经完成序列测定及分析,对各亚基生理功能也进行了较为深入的研究。生物化学及分子生物学工作揭示:生物体内以多种方式对编码H^+-ATPase主要亚基的基因表达和该酶的活力进行调控。其中,对于线粒体H^+-ATPasc的研究显得尤为突出。本文综述了线粒体H^+-ATPase的结构、功能、和调节方面的研究现状,并进一步提出了一些值得深入探讨的问题。

A new electromagnetic functional material composed of metallic hollow micro-spheres

This paper presents a new electromagnetic functional material developed byelectron-less nickel deposition technique, with a single hollow micro-sphere as the core templateand a thin nickel layer as the shell. The micrograph taken by a scanning electron microscope showsthe microstructures of the materials in detail. Scattering parameters of the waveguide sample holderfilled with the materials have been obtained over X band. The electromagnetic parameters computedfrom the measured S parameters show that the material with metallic hollow spheres has as highrelative permeability μ'_r as 19.0 with about 0.6 magnetic loss tangent over the whole bandwidth.Compared to the material with non-metallic spheres, the permeability μ'_r and the magnetic losstangent μ'_r increase greatly, while the permittivity remains lower than 1.8.

Observation of Ultrastructure in Lesions of Condyloma Acuminatum

Objective: To explore the effect of morphological changes in the development of condyloma acuminatum (CA) Materials and Methods: Lesions in five patients with CA were observed . Results: Upon electron microscopy, the most characteristic feature of the lesions important for diagnosis, was the presence of distinct perinuclear vacuolizations, or so-called koilocytes, among some epithelial cells. These cells possessed hyperchromatic nuclei, swollen mitochondria, dilated endoplasmic reticulum and dissolved glycogen. There were interchromatin granules and perichromatin granules in some nuclei. Moreover some virus particles were also seen in the nuclei of some infected cells. Conclusions: The ultrastructural findings may be used to histopathologically explain the pathogenesis and mechanism of this disease, and it is helpful for diagnosis of CA .

Effect of electromagnetic and ultrasonic cast rolling on microstructure and properties of 1050 aluminum substrate for presensitized plate

The 1050 aluminum alloy strip was prepared by means of electromagnetic and ultrasonic cast rolling on the modified asymmetric twin roll caster, and then the aluminum substrate for presensitized plate was prepared through cold rolling and annealing.The effects of electromagnetic and ultrasonic cast rolling on microstructure, mechanical properties, surface roughness and electrolytic corrosion properties of 1050 aluminum substrate were studied. The results show that electromagnetic and ultrasonic cast rolling can decrease the average crystallite size of aluminum substrate by 5 μm, increase the crystal boundaries with uniform distribution, and make the second-phase particles with smaller size distributed dispersively in the substrate, meanwhile, it can increase the tensile strength, elongation and micro-hardness by 4.58%, 9.85% and HV 2, respectively, reduce the surface roughness, make the surface appearance more even, electrolytic corrosion polarization curve of aluminum substrate more smooth and the surface corrosion pits with regular shape more dispersive.

Microstructure and properties of ultra-fine tungsten heavy alloys prepared by mechanical alloying and electric current activated sintering

The microstructure and properties of the 93W-4Ni-2Co-1Fe(mass fraction,%) tungsten heavy alloys prepared by mechanical alloying and electric current activated sintering from mixed elemental powders were investigated.After 15 h milling,the average W grain size in the powders is decreased to 120 nm.For the powders milled for 15 h,the density,hardness and transverse rupture strength of the alloys sintered only by an intensive pulse electric current are the maximum.When the total sintering time keeps constant,the properties of the sintered alloys can be obviously improved by optimizing the sintering time of pulse-and constant-currents.A bulk ultrafine alloy with an average W grain size of about 340 nm can be obtained by sintering 15 h-milled powders in a total sintering time of 6 min.The corresponding sintered density,hardness and transverse rupture strength reach 16.78 g /cm3,HRA84.3 and 968 MPa,respectively.

Effect of ultrasonic field on microstructure and mechanical properties of as-cast 7085 aluminum alloy

The effect of an ultrasonic field on the microstructure and mechanical properties of 7085 aluminum alloy during solidification was investigated by optical microscopy, Vickers hardness test, tensile test, scanning electron microscopy （SEM） with energy dispersive X-ray spectrometry, and electron probe micro-analysis （EPMA）. The results showed that the grains of aluminum alloy were significantly refined and secondary phases were dispersed and distributed uniformly at the grain boundaries, due to ultrasonic treatment （UST）. By EPMA, it was observed that the distribution of the main elements A1, Zn, Mg and Cu was more homogeneous in alloys with UST, than in alloys without UST. The mechanical properties of the aluminum alloy also significantly improved. As demonstrated by the SEM fractography of the fractured faces of several castings, fracture of the unrefined specimens occurred in a brittle manner, whereas the cracks of the refined specimens showed quasi-cleavage fracture.

Physical properties,vitrinite reflectance,and microstructure of coal,Taiyuan Formation,Qinshui Basin,China

In this study, we experimentally established the relationship between physical properties, vitrinite reflectance, and microstructure of coal, Taiyuan Formation, Qinshui Basin, China using representative coal samples collected from three different mines via the rock mechanics testing system （MTS）. We analyzed the organic macerals, vitrinite reflectance, and microstructure of 11 coal samples using petrography and scanning electron microscopy （SEM）. The experimental results suggest that （1） the elastic parameters can be described by linear equations, （2） both P- and S-wave velocities display anisotropy, （3） the anisotropy negatively correlates with vitrinite reflectance, and （4） the acoustic velocities and Young＇s modulus are negatively correlated with the volume of micropores. The derived empirical equations can be used in the forward modeling and seismic inversion of physical properties of coal for improving the coal-bed methane （CBM） reservoir characterization.

Impact of ultrasonic power on liquid fraction,microstructure and physical characteristics of A356 alloy molded through cooling slope

This study involves A356 alloy molded through ultrasonically vibrated cooling slope.The slope alongside ultrasonic power enables indispensable shear for engendering slurry from which the semisolid cast/heat treated billets got produced.An examination demonstrates ultrasonically vibrated cooling slope influencing the liquid fraction/microstructure/physical characteristics of stated billets.The investigation encompasses five diverse ultrasonic powers(0,75,150,200,250 W).The ultrasonic power of 150 W delivers finest/rounded microstructure with enhanced physical characteristics.Microstructural modifications reason physical transformations because of grain refinement and grain boundary/Hall-Petch strengthening.A smaller grain size reasons a higher strength/shape factor and an increased homogeneity reasons a higher ductility.Microstructural characteristics get improved by reheating.It is owing to coalescence throughout temperature homogenization.The physical characteristics is improved by reheating because of a reduced porosity and enhanced dissolution besides augmented homogeneity.A direct comparison remains impossible owing to unavailability of researches on ultrasonically vibrated cooling slope.

Microstructure and mechanical properties of VAlN/Si_(3)N_(4) nano-multilayer coatings

VAlN coating is of particular interest for dry cutting applications owing to its low-friction and excellent abrasiveness.Nano-multilayer structure is designed to tailor the properties of VAlN coating.In this work,a series of VAlN/Si_(3)N_(4) nano-multilayer coatings with varied Si_(3)N_(4) layer thicknesses were prepared by reactive sputtering method.The microstructure and mechanical properties of the coatings were both investigated.It is revealed that Si_(3)N_(4) with a shallow thickness(~0.4 nm)was crystallized and grown coherently with VAlN,showing a remarkable increase in hardness compared to VAlN monolayer coating.The hardness of coherently VAlN/Si_(3)N_(4) nano-multilayer coatings reached to 48.7 GPa.With further increase of Si_(3)N_(4) layer thickness,the coherent growth of nano-multilayers was terminated,showing amorphous structure formed in nano-multilayers and the hardness was declined.On the other hand,when Si_(3)N_(4) layer thickness was 0.4 nm,the friction coefficient of VAlN/Si_(3)N_(4) nano-multilayer coating was almost equal to that of VAlN monolayer coating,which was attributed to the crystallization of Si_(3)N_(4) and the produced coherent interfaces between VAlN and Si_(3)N_(4) for the hardening effect of nano-multilayer coatings.Upon further increase of Si_(3)N_(4) layer thickness,pronounced improvement of friction coefficient in VAlN/Si_(3)N_(4) nano-multilayer coating was observed.

Microstructural study of the ablation behaviors of 3D fine weave pierced Carbon/Carbon composites using plasma torch at ultra-high temperature

A simple and effective method of testing ablation behaviors of carbon/carbon composites at high temperature was provided, which used plasma torch as the heater. The ablation resistance of 3D fine weave pierced carbon/carbon composites at high temperature was also studied. The results show that temperature of the plasma flame is very high which is much closer to the real work environment of carbon/carbon composites. The factors that affect the ablation characters of carbon/carbon composites depend on both the properties of their components and the environmental conditions in which the material is placed. The ablation behaviors of C/C composites change from the center flame region predominantly influenced by sublimation of graphite to the region close to the outer flame influenced mainly by oxidization of graphite. The sublimation ability of carbon matrix is equal to that of carbon fibers but the oxidization ability of carbon fibers is significantly enhanced compared to that of carbon matrix.

Mineralogical Features and Properties of Serpentine as Indicator of the Deep Earth Subduction Processes

The article presents the results of study of composition, structure and properties of three genetic types of serpentinite, developed by chromite-bearing ultrabasic rocks, by metamorphic zones of carbonate rocks and within the zone of weathering of ultrabasic rocks. The samples were selected from deposits, located along the Main Ural Fault-the Paleozoic subduction zone （named GUR）. Peculiarities of microstructure, chemical composition and properties of serpentinites formed in different geological conditions were investigated and their comparative study was held. They were devided three groups of serpentinites with oriented and non-oriented structure which formed by different protholites： mantle, lithosphere and crust.

Effect of initial microstructure on superplastic deformation of AZ70 magnesium alloy

The mechanical properties and deformation mechanism of semi-continuously casting and as-extruded AZ70 magnesium alloys in a wide range of grain sizes(from 14 to 103μm)were investigated at 653 K and 1×10-3s -1.It is discovered that with reducing grain size,flow stress is weakened and plasticity is improved and even superplasticity exhibits.SEM and OM were used to clarify the deformation mechanism.It is suggested that dynamic recrystallization(DRX)is the coordination deformation mechanism of grain boundary sliding(GBS)for coarse grain,and cavity and intracrystalline slip are the coordination deformation mechanisms of GBS for fine grain.

Ultrastructural observation on sterilization of melittin

The effects of melittin on growth and bacteriostasis of four pathogens were extensively investigated using scanning electron microscopy(SEM) and transmission electron microscopy(TEM).The results indicated that the melittin had a marked bacteriostatic effect on the four pathogenic bacteria.Among these,E.cacotowora was influenced most powerfully and quickly,the yeast and F.fulva were the second,and the S.aureus was inhibited by a low concentration but was killed by a high concentration.It was observed in the experiments that melittin killed pathogenic bacteria in three ways.One was by pore formation.After integrating melittin into the plasma membrane,a vacuole was formed then penetrated,resulting in bacterial content leakage.The vacuole also experienced plasmolysis and the growing cavity destroyed the membrane.A third effect was the formation of vacuoles in the cells which induced the pycnosis of the cytoplasm resulting in a cell death.The mechanism of melittin bacteriostasis was the result of integrating melittin with phospholipod double layers of the plasmalemma and the endomembranes.

Grain oriented growth and properties of ultra-high temperature CaBi_2Nb_2O_9 piezoelectric ceramics

CaBi2Nb2O9 (CBNO) ceramics was prepared at 1050℃ using regular flake-like CBNO powders as the precursor, and synthe-sized by the molten salts synthesis method. The tropism degree and microstructure of the ceramics were analyzed, and the die-lectric, ferroelectric and piezoelectric properties were characterized. Compared with conventional methods, the properties of CBNO ceramics by the new preparation method were found to be better. As the sinter temperature decreases, the grain growth becomes regular with textured features. The polarization process becomes easy to be realized at room temperature. Moreover, the dielectric loss decreases and the piezoelectric constant increases significantly.

Relationship between the parent charge transfer gap and maximum transition temperature in cuprates

One of the biggest puzzles concerning the cup- rate high temperature superconductors is what determines the maximum transition temperature （Tc,max）, which varies from less than 30 to above 130 K in different compounds. Despite this dramatic variation, a robust trend is that within each family, the double-layer compound always has higher Tc,max than the single-layer counterpart. Here we use scanning tunneling microscopy to investigate the electronic structure of four cuprate parent compounds belonging to two different families. We find that within each family, the double layer compound has a much smaller charge transfer gap size （ACT）, indicating a clear anticorrelation between AcT and Tc,max. These results suggest that the charge transfer gap plays a key role in the superconducting physics of cuprates, which shed important new light on the high To mechanism from doped Mott insulator perspective.