Conventional mechanical method and mechanical method combined with vacuum freeze-drying technology were used to make the ultra-fine powders of edible fungus (Auricularia auricular). The content of basic nutrients, ami...Conventional mechanical method and mechanical method combined with vacuum freeze-drying technology were used to make the ultra-fine powders of edible fungus (Auricularia auricular). The content of basic nutrients, amino acid, micro structure and their properties of raw edible fungus and the edible fungus powders obtained with the two methods were analyzed and compared. The granularity size and micro-structure of the pulverized samples were analyzed by SEM and TEM technology. The average granularity size of the edible fungus powder obtained with mechanical method was 1–5 μm, while that obtained with mechanical method combined with vacuum freeze-drying process was 0.5–1 μm. The ultra-fine powders of edible fungus obtained with the two methods had better water recovery capability and quality, and their preserving time was longer than that of raw edible fungus. All the properties of the ultra-fine powders of edible fungus obtained with the vacuum freeze-drying technology were evidently superior to that of the conventional mechanical method. Keywords Auricularia auricula - Edible fungus - Ultra-fine powders - Vacuum freeze-drying CLC number TS205 Document code B Biography: YANG Chun-yu (1975), female, Ph. D. in Engineering Technology Center of Forestry and Wood Workine, Machinery, Northeast Forestry University, Harbin 150040, P. R. China.Responsible editor: Zhu Hong展开更多
Strained Si_ 1-xGe_x and Si materials are successfully grown on Si substrate by ultraviolet light chemical vapor deposition under ultrahigh vacuum at a low substrate temperature of 450℃ and 480℃,respectively.At such...Strained Si_ 1-xGe_x and Si materials are successfully grown on Si substrate by ultraviolet light chemical vapor deposition under ultrahigh vacuum at a low substrate temperature of 450℃ and 480℃,respectively.At such low temperature,autodoping effects from the substrate and interdiffusion effects at each interface could be suppressed efficiently.The strained Si_ 1-xGe_x and multilayer Si_ 1-xGe_x/Si structures are examined by X-ray diffraction,SMIS,etc.,and it is found that the materials have good crystallinity and the rising and falling edges are steep.The technique has a capability of growing high-quality Si_ 1-xGe_x/Si strained layers.展开更多
Objective To explore the influence factors in hematoma formation after removing benign breast lesions with an ultrasound-guided vacuum-assisted system.Methods A total of 232 females with 312 benign breast masses recei...Objective To explore the influence factors in hematoma formation after removing benign breast lesions with an ultrasound-guided vacuum-assisted system.Methods A total of 232 females with 312 benign breast masses received excisional biopsy with ultrasoundguided vacuum-assisted system.The pathology of patients,results of hematoma development and outcome,influence factors for hematoma occurrence(nodule size,nodule location,number of nodule,breast shape,menstrual period,efficacy time of bandage,and application of hemostatic agents during the procedure) were recorded.Results Pathologic examination revealed fibroadenomas in 138 lesions,fibroadenosis in 127 lesions,intraductal papillomas in 39 lesions,inflammatory change in 4 lesions,retention cyst of the breast in 3 lesions,and benign phyllodes tumor in 1 lesion.Thirty hematomas were observed in patients(9.6%).Finally,97.0%hematomas were absorbed completely within 6 months follow-up.The incidence rates of hematoma were increased by 24.7%,10.0%,63.2%,13.9%in the nodule diameter larger or equal to 25 mm group,removal of larger or equal to two nodules once time from one patient group,menstrual period group,and larger and loose breast group,respectively(all P<0.05).However,the incidences were decreased by 60.6%in the bandage performed for 12-24 hours or beyond 24 hours group(P<0.05).The multiple logistic regression models revealed that nodule size(x^2=15.227,P<0.001),number of nodule(x^2=7.767,P=0.005),menstrual period(x^2=24.530,P<0.001),and breast shape(x^2=9.559,P=0.002) were independent risk factors associated with hematoma occurrence,but efficacy time of bandage was a protective factor associated with hematoma occurrence.Conclusion The occurrence of hematoma after the minimally invasive operation was associated with nodule size,number of nodule,menstrual period,breast shape,and efficacy time of bandage.展开更多
An in situ heating system was built for the Auger electron spectroscopy to investigate the thermal effect of Auger lines. A GaN sample was studied in this system. The kinetic energy of Ga LMM and MVV Auger lines were ...An in situ heating system was built for the Auger electron spectroscopy to investigate the thermal effect of Auger lines. A GaN sample was studied in this system. The kinetic energy of Ga LMM and MVV Auger lines were observed to shift negatively with temperature increasing. By using ab initio calculation, the theoretical Ga MVV Auger line shape was fit, which well reflects the inner property of the line. The Auger shift with heating is related with the valence electron rearrangement in the thermal expansion of the local bonds.展开更多
Employing even higher voltage level to promote power transmission economy is an important subject in the program of power transmission from west to east. The influence of electro-magnetic environment of transmission p...Employing even higher voltage level to promote power transmission economy is an important subject in the program of power transmission from west to east. The influence of electro-magnetic environment of transmission project being closely related with human health and construction cost has to be seriously considered before advancing transmission voltage. This paper analyzes and discusses overseas and domestic research achievements on radio interference, audible noise, power frequency electric field, power frequency magnetic fields, DC resultant field intensity and ion stream involved in power transmission at ultra-high-voltage (UHV)AC and ± 800 kV DC or even higher voltage levels. Suggestions on limiting electro-magnetic effects and their ceiling value as well as measures to improve electro-magnetic environment are put forward.展开更多
To meet stringent requirements in vacuum and cleanness for semiconductor manufacturing, a new power drive module for Selective Compliant Assembly Robot Arm (SCARA) type robot has been developed for wafer-transfer. I...To meet stringent requirements in vacuum and cleanness for semiconductor manufacturing, a new power drive module for Selective Compliant Assembly Robot Arm (SCARA) type robot has been developed for wafer-transfer. In order to obtain complete hermetic volume for higher vacuum and prevent leakage of hazardous gases, feedthrough motions involving transfer between the vacuum and motors are achieved by the use of metal bellows and magnetic coupling. An analysis of the coaxial-type magnetic coupling by employing the technique of current sheet model is presented. This approach is proved to be a precise and easy method. The construction of power drive module shows its advantage in maintaining ultrahigh vacuum and also enhances the efficiency for transporting the wafer, as compared with conventional design.展开更多
SINR distribution and rate overage distribution are crucial for optimization of deployment of Ultra-dense Het Nets.Most existing literatures assume that BSs have full queues and full-buffer traffic.In fact,due to ultr...SINR distribution and rate overage distribution are crucial for optimization of deployment of Ultra-dense Het Nets.Most existing literatures assume that BSs have full queues and full-buffer traffic.In fact,due to ultra-dense deployment of small cells,traffic in small cell varies dramatically in time and space domains.Hence,it is more practical to investigate scenario with burst traffic.In this paper,we consider a two-tier non-uniform ultra-dense Het Net with burst traffic,where macro BSs are located according to Poisson Point Process(PPP),and pico BSs are located according to Poisson Hole Process(PHP).The closed-form expressions of SINR distribution and rate distribution are derived,and then validated through simulation.Our study shows that different from the result of full buffer case,the SINR distribution and rate distribution of users depend on the average transmission probabilities of BSs in burst traffic case.展开更多
The result of the evaporation of Sio/SiO2 two layer antireflection coatings monitored by the MODEL IL 400 DEPOSITION CONTROLLER is reported.A superluminescent diode with high output power is fabricated by evaporating ...The result of the evaporation of Sio/SiO2 two layer antireflection coatings monitored by the MODEL IL 400 DEPOSITION CONTROLLER is reported.A superluminescent diode with high output power is fabricated by evaporating antireflection coating on the front facet of 1.3μm buried heterostructure laser.展开更多
A finite element reconstruction algorithm for ultrasound tomography based on the Helmholtz equation in frequency domain is presented to monitor the grouting defects in reinforced concrete structures.In this algorithm,...A finite element reconstruction algorithm for ultrasound tomography based on the Helmholtz equation in frequency domain is presented to monitor the grouting defects in reinforced concrete structures.In this algorithm,a hybrid regularizations-based iterative Newton method is implemented to provide stable inverse solutions.Furthermore,a dual mesh scheme and an adjoint method are adopted to reduce the computation cost and improve the efficiency of reconstruction.Simultaneous reconstruction of both acoustic velocity and attenuation coefficient for a reinforced concrete model is achieved with multiple frequency data.The algorithm is evaluated with numerical simulation under various practical scenarios including varied transmission/receiving modes,different noise levels,different source/detector numbers,and different contrast levels between the heterogeneity and background region.Results obtained suggest that the algorithm is insensitive to noise,and the reconstructions are quantitatively accurate in terms of the location,size and acoustic properties of the target over a range of contrast levels.展开更多
Aimed at the problem of mixing working gas and cushion gas in carbon sequestration technology, the feasibility of using carbon dioxide as the cushion gas in reservoirs is discussed firstly. At the usual condition of r...Aimed at the problem of mixing working gas and cushion gas in carbon sequestration technology, the feasibility of using carbon dioxide as the cushion gas in reservoirs is discussed firstly. At the usual condition of reservoirs, carbon dioxide is a kind of supercritical fluid with high condensability, high viscosity and high density. Secondly, this article studies the laws of formation and development of mixing zone by numerical simulation and analyses the impact on mixing zone brought by different injection modes and rational ratios of cushion gas in reservoirs. It is proposed that the appropriate injection ratio of cushion gas is 20%-30%. Using carbon dioxide as cushion gas in gas reservoirs is able to make the running of natural gas reservoirs economical and efficient.展开更多
Multi-level inverters(MLIs)have become popular in different applications such as industrial power control systems and distributed generations.There are different forms of MLIs.The cascaded MLIs(CMLIs)have some special...Multi-level inverters(MLIs)have become popular in different applications such as industrial power control systems and distributed generations.There are different forms of MLIs.The cascaded MLIs(CMLIs)have some special advantages among them such as more different output voltage levels using the same number of components and higher power quality.In this paper,a 27-level inverter switching algorithm considering total harmonic distortion(THD)minimization is investigated.Switching angles of the inverter switches are achieved by minimizing a THD-based objective function.In order to minimize the THD-based objective function,the hyper-spherical search(HSS)algorithm,as a novel optimization algorithm,is improved and the results of improved HSS(IHSS)are compared with HSS algorithm and other five evolutionary algorithms to show the advantages of IHSS algorithm.展开更多
This paper describes a reactive navigation proposed for a differentially driven robot. The aim of the reactive navigation is to prescribe behavior to the robot based on actual sensor values that is collision-free. Ana...This paper describes a reactive navigation proposed for a differentially driven robot. The aim of the reactive navigation is to prescribe behavior to the robot based on actual sensor values that is collision-free. Analysis of reactive navigation methods shows that there is no reliable reactive collision-free method. However, method VFH+ is suboptimal reactive navigation method for static environment. Original method was proposed for ultrasonic rangefinders. Nowadays, much more sophisticated sensors are available. That is why our modification is proposed for a laser rangefinder attached to indoor mobile robot. Results are presented as simulation in Matlab and also as experiments with real robot. Based on these experiments, it can be claimed that VFH+ is very effective reactive navigation method for various sensors and environments and it can be modified for different requirements on robot behavior.展开更多
The temperature is a key factor for the quality of the SiGe alloy grown by D-UHV/CVD. In conventional conditions,the lowest temperature for SiGe growth is about 550℃. Generally, the pressure of the growth chamber is ...The temperature is a key factor for the quality of the SiGe alloy grown by D-UHV/CVD. In conventional conditions,the lowest temperature for SiGe growth is about 550℃. Generally, the pressure of the growth chamber is about 10 ^-5 Pa when liquid nitrogen is introduced into the wall of the growth chamber with the flux of 6sccm of the disilane gas. We have succeeded in depositing SiGe films at much lower temperature using a novel method. It is about 10.2 Pa without liquid nitrogen, about 3 magnitudes higher than the traditional method,leading to much faster deposition rate. Without liquid nitrogen,the SiGe film and SiGe/Si superlattice are grown at 485℃. The DCXRD curves and TEM image show that the quality of the film is good. The experiments show that this method is efficient to deposit SiGe at low temperature.展开更多
In this work,silicon-germanium(SiGe)thin films are epitaxially grown on Ge substrates by ultra-high vacuum chemical vapor deposition and then doped with Mn element by ion-implantation and subsequent rapid thermal anne...In this work,silicon-germanium(SiGe)thin films are epitaxially grown on Ge substrates by ultra-high vacuum chemical vapor deposition and then doped with Mn element by ion-implantation and subsequent rapid thermal annealing(RTA).The characterizations show that the epitaxial SiGe thin films are single-crystalline with uniform tensile strain and then become polycrystalline after the ion implantation and following RTA.The magnetization measurements indicate that the annealed thin films exhibit Mn concentration-dependent ferromagnetism up to 309 K and the X-ray magnetic circular dichroism characterizations reveal the spin and orbital magnetic moments from the substitutional Mn element.To minimize the influence of anomalous Hall effect,magneto-transport measurements at a high magnetic field up to 31 T at 300 K are performed to obtain the hole mobility,which reaches a record-high value of~1230 cm^(2)V^(-1)s^(-1),owing to the crystalline quality and tensile strain-induced energy band modulation of the samples.The first demonstration of Mn-doped SiGe thin films with roomtemperature ferromagnetism and high carrier mobility may pave the way for practical semiconductor spintronic applications.展开更多
We firstly described a simulation model to investigate the influence of grain boundary(GB)on the vortex transport properties in YBCO film.It is found that the size of inhomogeneous area caused by GB as well as the ave...We firstly described a simulation model to investigate the influence of grain boundary(GB)on the vortex transport properties in YBCO film.It is found that the size of inhomogeneous area caused by GB as well as the average velocity in transverse and longitudinal directions shows an angular dependence when the angle between the GB and the sample edge varies.We have also studied the impact of magnetic field intensity on dynamic behavior of vortex lattice and found that a lower vortex density makes it difficult for the vortex lattice to transfer from pinning state to flow state.As the magnetic field is decreased beyond a critical value,sharp jumps and strong fluctuations were observed in the I-V curve.Finally,we conducted measurements on a thin film YBa2Cu3O7 with an individual artificial grain boundary to support the simulation process.展开更多
Based on the rapid experimental developments of circuit QED,we propose a feasible scheme to simulate the spin-boson model with superconducting circuits,which can be used to detect quantum Kosterlitz-Thouless(KT) phase...Based on the rapid experimental developments of circuit QED,we propose a feasible scheme to simulate the spin-boson model with superconducting circuits,which can be used to detect quantum Kosterlitz-Thouless(KT) phase transition.We design the spinboson model by using a superconducting phase qubit coupled to a semi-infinite transmission line,which is regarded as a bosonic reservoir with a continuum spectrum.By tuning the bias current or the coupling capacitance,the quantum KT transition can be directly detected through tomography measurement on the states of the phase qubit.We also estimate the experimental parameters using the numerical renormalization group method.展开更多
文摘Conventional mechanical method and mechanical method combined with vacuum freeze-drying technology were used to make the ultra-fine powders of edible fungus (Auricularia auricular). The content of basic nutrients, amino acid, micro structure and their properties of raw edible fungus and the edible fungus powders obtained with the two methods were analyzed and compared. The granularity size and micro-structure of the pulverized samples were analyzed by SEM and TEM technology. The average granularity size of the edible fungus powder obtained with mechanical method was 1–5 μm, while that obtained with mechanical method combined with vacuum freeze-drying process was 0.5–1 μm. The ultra-fine powders of edible fungus obtained with the two methods had better water recovery capability and quality, and their preserving time was longer than that of raw edible fungus. All the properties of the ultra-fine powders of edible fungus obtained with the vacuum freeze-drying technology were evidently superior to that of the conventional mechanical method. Keywords Auricularia auricula - Edible fungus - Ultra-fine powders - Vacuum freeze-drying CLC number TS205 Document code B Biography: YANG Chun-yu (1975), female, Ph. D. in Engineering Technology Center of Forestry and Wood Workine, Machinery, Northeast Forestry University, Harbin 150040, P. R. China.Responsible editor: Zhu Hong
文摘Strained Si_ 1-xGe_x and Si materials are successfully grown on Si substrate by ultraviolet light chemical vapor deposition under ultrahigh vacuum at a low substrate temperature of 450℃ and 480℃,respectively.At such low temperature,autodoping effects from the substrate and interdiffusion effects at each interface could be suppressed efficiently.The strained Si_ 1-xGe_x and multilayer Si_ 1-xGe_x/Si structures are examined by X-ray diffraction,SMIS,etc.,and it is found that the materials have good crystallinity and the rising and falling edges are steep.The technique has a capability of growing high-quality Si_ 1-xGe_x/Si strained layers.
基金Supported by the National Major Scientific Equipment Special Project(2012YQ16020304)
文摘Objective To explore the influence factors in hematoma formation after removing benign breast lesions with an ultrasound-guided vacuum-assisted system.Methods A total of 232 females with 312 benign breast masses received excisional biopsy with ultrasoundguided vacuum-assisted system.The pathology of patients,results of hematoma development and outcome,influence factors for hematoma occurrence(nodule size,nodule location,number of nodule,breast shape,menstrual period,efficacy time of bandage,and application of hemostatic agents during the procedure) were recorded.Results Pathologic examination revealed fibroadenomas in 138 lesions,fibroadenosis in 127 lesions,intraductal papillomas in 39 lesions,inflammatory change in 4 lesions,retention cyst of the breast in 3 lesions,and benign phyllodes tumor in 1 lesion.Thirty hematomas were observed in patients(9.6%).Finally,97.0%hematomas were absorbed completely within 6 months follow-up.The incidence rates of hematoma were increased by 24.7%,10.0%,63.2%,13.9%in the nodule diameter larger or equal to 25 mm group,removal of larger or equal to two nodules once time from one patient group,menstrual period group,and larger and loose breast group,respectively(all P<0.05).However,the incidences were decreased by 60.6%in the bandage performed for 12-24 hours or beyond 24 hours group(P<0.05).The multiple logistic regression models revealed that nodule size(x^2=15.227,P<0.001),number of nodule(x^2=7.767,P=0.005),menstrual period(x^2=24.530,P<0.001),and breast shape(x^2=9.559,P=0.002) were independent risk factors associated with hematoma occurrence,but efficacy time of bandage was a protective factor associated with hematoma occurrence.Conclusion The occurrence of hematoma after the minimally invasive operation was associated with nodule size,number of nodule,menstrual period,breast shape,and efficacy time of bandage.
基金The author would like to express thanks to Professor Jun-yong Kang and Dr. Duan-jun Cai for their valuable discussions. This work was partly supported by the National Nature Science Foundation of China (No.60206030, No.10134030 and No.69976023) and the Natural Science Found of Xiamen University (No.B200337).
文摘An in situ heating system was built for the Auger electron spectroscopy to investigate the thermal effect of Auger lines. A GaN sample was studied in this system. The kinetic energy of Ga LMM and MVV Auger lines were observed to shift negatively with temperature increasing. By using ab initio calculation, the theoretical Ga MVV Auger line shape was fit, which well reflects the inner property of the line. The Auger shift with heating is related with the valence electron rearrangement in the thermal expansion of the local bonds.
文摘Employing even higher voltage level to promote power transmission economy is an important subject in the program of power transmission from west to east. The influence of electro-magnetic environment of transmission project being closely related with human health and construction cost has to be seriously considered before advancing transmission voltage. This paper analyzes and discusses overseas and domestic research achievements on radio interference, audible noise, power frequency electric field, power frequency magnetic fields, DC resultant field intensity and ion stream involved in power transmission at ultra-high-voltage (UHV)AC and ± 800 kV DC or even higher voltage levels. Suggestions on limiting electro-magnetic effects and their ceiling value as well as measures to improve electro-magnetic environment are put forward.
文摘To meet stringent requirements in vacuum and cleanness for semiconductor manufacturing, a new power drive module for Selective Compliant Assembly Robot Arm (SCARA) type robot has been developed for wafer-transfer. In order to obtain complete hermetic volume for higher vacuum and prevent leakage of hazardous gases, feedthrough motions involving transfer between the vacuum and motors are achieved by the use of metal bellows and magnetic coupling. An analysis of the coaxial-type magnetic coupling by employing the technique of current sheet model is presented. This approach is proved to be a precise and easy method. The construction of power drive module shows its advantage in maintaining ultrahigh vacuum and also enhances the efficiency for transporting the wafer, as compared with conventional design.
基金partially supported by National 863 Program(2014AA01A702)National Basic Research Program of China(973 Program 2012CB316004)National Natural Science Foundation(61271205,61221002 and 61201170)
文摘SINR distribution and rate overage distribution are crucial for optimization of deployment of Ultra-dense Het Nets.Most existing literatures assume that BSs have full queues and full-buffer traffic.In fact,due to ultra-dense deployment of small cells,traffic in small cell varies dramatically in time and space domains.Hence,it is more practical to investigate scenario with burst traffic.In this paper,we consider a two-tier non-uniform ultra-dense Het Net with burst traffic,where macro BSs are located according to Poisson Point Process(PPP),and pico BSs are located according to Poisson Hole Process(PHP).The closed-form expressions of SINR distribution and rate distribution are derived,and then validated through simulation.Our study shows that different from the result of full buffer case,the SINR distribution and rate distribution of users depend on the average transmission probabilities of BSs in burst traffic case.
文摘The result of the evaporation of Sio/SiO2 two layer antireflection coatings monitored by the MODEL IL 400 DEPOSITION CONTROLLER is reported.A superluminescent diode with high output power is fabricated by evaporating antireflection coating on the front facet of 1.3μm buried heterostructure laser.
基金Project(31200748)supported by the National Natural Science Foundation of China
文摘A finite element reconstruction algorithm for ultrasound tomography based on the Helmholtz equation in frequency domain is presented to monitor the grouting defects in reinforced concrete structures.In this algorithm,a hybrid regularizations-based iterative Newton method is implemented to provide stable inverse solutions.Furthermore,a dual mesh scheme and an adjoint method are adopted to reduce the computation cost and improve the efficiency of reconstruction.Simultaneous reconstruction of both acoustic velocity and attenuation coefficient for a reinforced concrete model is achieved with multiple frequency data.The algorithm is evaluated with numerical simulation under various practical scenarios including varied transmission/receiving modes,different noise levels,different source/detector numbers,and different contrast levels between the heterogeneity and background region.Results obtained suggest that the algorithm is insensitive to noise,and the reconstructions are quantitatively accurate in terms of the location,size and acoustic properties of the target over a range of contrast levels.
基金Sponsored by the National Natural Science Foundation of China(Grant No.50676025)
文摘Aimed at the problem of mixing working gas and cushion gas in carbon sequestration technology, the feasibility of using carbon dioxide as the cushion gas in reservoirs is discussed firstly. At the usual condition of reservoirs, carbon dioxide is a kind of supercritical fluid with high condensability, high viscosity and high density. Secondly, this article studies the laws of formation and development of mixing zone by numerical simulation and analyses the impact on mixing zone brought by different injection modes and rational ratios of cushion gas in reservoirs. It is proposed that the appropriate injection ratio of cushion gas is 20%-30%. Using carbon dioxide as cushion gas in gas reservoirs is able to make the running of natural gas reservoirs economical and efficient.
文摘Multi-level inverters(MLIs)have become popular in different applications such as industrial power control systems and distributed generations.There are different forms of MLIs.The cascaded MLIs(CMLIs)have some special advantages among them such as more different output voltage levels using the same number of components and higher power quality.In this paper,a 27-level inverter switching algorithm considering total harmonic distortion(THD)minimization is investigated.Switching angles of the inverter switches are achieved by minimizing a THD-based objective function.In order to minimize the THD-based objective function,the hyper-spherical search(HSS)algorithm,as a novel optimization algorithm,is improved and the results of improved HSS(IHSS)are compared with HSS algorithm and other five evolutionary algorithms to show the advantages of IHSS algorithm.
文摘This paper describes a reactive navigation proposed for a differentially driven robot. The aim of the reactive navigation is to prescribe behavior to the robot based on actual sensor values that is collision-free. Analysis of reactive navigation methods shows that there is no reliable reactive collision-free method. However, method VFH+ is suboptimal reactive navigation method for static environment. Original method was proposed for ultrasonic rangefinders. Nowadays, much more sophisticated sensors are available. That is why our modification is proposed for a laser rangefinder attached to indoor mobile robot. Results are presented as simulation in Matlab and also as experiments with real robot. Based on these experiments, it can be claimed that VFH+ is very effective reactive navigation method for various sensors and environments and it can be modified for different requirements on robot behavior.
文摘The temperature is a key factor for the quality of the SiGe alloy grown by D-UHV/CVD. In conventional conditions,the lowest temperature for SiGe growth is about 550℃. Generally, the pressure of the growth chamber is about 10 ^-5 Pa when liquid nitrogen is introduced into the wall of the growth chamber with the flux of 6sccm of the disilane gas. We have succeeded in depositing SiGe films at much lower temperature using a novel method. It is about 10.2 Pa without liquid nitrogen, about 3 magnitudes higher than the traditional method,leading to much faster deposition rate. Without liquid nitrogen,the SiGe film and SiGe/Si superlattice are grown at 485℃. The DCXRD curves and TEM image show that the quality of the film is good. The experiments show that this method is efficient to deposit SiGe at low temperature.
基金supported by the National Key Research and Development Program of China(2017YFB0405702)the National Natural Science Foundation of China(52172272)。
文摘In this work,silicon-germanium(SiGe)thin films are epitaxially grown on Ge substrates by ultra-high vacuum chemical vapor deposition and then doped with Mn element by ion-implantation and subsequent rapid thermal annealing(RTA).The characterizations show that the epitaxial SiGe thin films are single-crystalline with uniform tensile strain and then become polycrystalline after the ion implantation and following RTA.The magnetization measurements indicate that the annealed thin films exhibit Mn concentration-dependent ferromagnetism up to 309 K and the X-ray magnetic circular dichroism characterizations reveal the spin and orbital magnetic moments from the substitutional Mn element.To minimize the influence of anomalous Hall effect,magneto-transport measurements at a high magnetic field up to 31 T at 300 K are performed to obtain the hole mobility,which reaches a record-high value of~1230 cm^(2)V^(-1)s^(-1),owing to the crystalline quality and tensile strain-induced energy band modulation of the samples.The first demonstration of Mn-doped SiGe thin films with roomtemperature ferromagnetism and high carrier mobility may pave the way for practical semiconductor spintronic applications.
基金supported by the National Basic Research Program of China("973"Project)(Grant Nos.2011CBA00107 and 2014CB339804)the National Natural Science Foundation of China(Grant Nos.61371036,11234006 and 11227904)+1 种基金the Natural Science Foundation of Jiangsu(Grant No.BK2012013)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘We firstly described a simulation model to investigate the influence of grain boundary(GB)on the vortex transport properties in YBCO film.It is found that the size of inhomogeneous area caused by GB as well as the average velocity in transverse and longitudinal directions shows an angular dependence when the angle between the GB and the sample edge varies.We have also studied the impact of magnetic field intensity on dynamic behavior of vortex lattice and found that a lower vortex density makes it difficult for the vortex lattice to transfer from pinning state to flow state.As the magnetic field is decreased beyond a critical value,sharp jumps and strong fluctuations were observed in the I-V curve.Finally,we conducted measurements on a thin film YBa2Cu3O7 with an individual artificial grain boundary to support the simulation process.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11004065,11104057 and 11125417)the Natural Science Foundation of Guangdong Province (Grant No.10451063101006312)+1 种基金the State Key Program for Basic Research of China(Grant No. 2011CB922104)the GRF and CRF of the RGC of Hong Kong
文摘Based on the rapid experimental developments of circuit QED,we propose a feasible scheme to simulate the spin-boson model with superconducting circuits,which can be used to detect quantum Kosterlitz-Thouless(KT) phase transition.We design the spinboson model by using a superconducting phase qubit coupled to a semi-infinite transmission line,which is regarded as a bosonic reservoir with a continuum spectrum.By tuning the bias current or the coupling capacitance,the quantum KT transition can be directly detected through tomography measurement on the states of the phase qubit.We also estimate the experimental parameters using the numerical renormalization group method.