超耐性纳硅材料在水利枢纽水位标尺涂装中的应用试验研究

为解决水利枢纽水位标尺在紫外照射、酸雨腐蚀、高速水流冲刷、干湿循环等不利环境中易出现的涂层粉化、失光、开裂、剥落、板材脱落等问题,综合运用理论分析、室内试验、现场试验等多种手段进行研究。在实验室分别以不锈钢板、铝板、高密度水泥板为基材,制备了水位标尺试样进行耐水、耐盐水、冻融循环、耐酸性及附着力试验,并在王甫洲水利枢纽泄水闸、船闸等混凝土结构上进行了现场涂装试验。室内试验结果表明,纳硅涂层对上述各类基材均具有良好的适用性,性能优异。在户外运行3 a后,对涂层的光泽度、颜色、硬度、厚度、粉化、外观进行了对比分析,纳硅涂层漆膜无任何破坏,色泽鲜艳、光泽饱满。研究表明,纳硅涂层具有超强的耐候性,能较好地解决水位标尺的各种问题。研究成果在该领域极具推广价值。

矿区植物根内嗜鱼外瓶霉对重金属的耐性和超积累作用

从云南会泽铅-锌矿区自然生长植物密序野古草(Arundinella bengalensis(Spreng.)Druce)的健康根内分离得到一株深色有隔内生真菌(dark septate endophytes,DSE)。据其形态学特征和ITS1-5.8S-rDNA-ITS2序列分析,鉴定为一株嗜鱼外瓶霉(Exophiala pisciphila)。纯培养条件下研究了其对Pb2+、Zn2+、Cd2+的耐性和超积累作用。结果表明,此菌株在液体合成培养基上可以分别耐受2、3和0.5 g/L的Pb2+、Zn2+和Cd2+;在含Pb2+、Cd2+培养基中生长其菌丝可以富集超过其干重25%以上的Pb2+和5%以上的Cd2+;显示此菌株属于极端耐性并具有超积累作用的真菌。此真菌在植物根系的定殖或许可以通过菌丝体对金属离子的固持作用缓解植物根围土壤微环境中超量金属离子对植物的毒害作用。

Fabrication and anti-corrosion performance of superhydrophobic silane film on sintered NdFeB

An eco-friendly superhydrophobic protective film(DTMS/TEOS silane film)was fabricated on sintered NdFeB substrate through the utilization of electrochemically assisted deposition technology.The structure,properties,and film-forming mechanism of dodecyltrime-thoxysilane(DTMS)/tetraethoxysilane(TEOS)silane films were comprehensively analyzed using Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),potentiodynamic polarization curves and electrochemical impedance spectroscopy(EIS).Based on the test results,it can be determined that this film has a superhydrophobic property with a hydrophobicity angle of 152°.This special property can be attributed to the long alkyl chains in the DTMS molecule,the rough morphology,and the low surface energy of the DTMS/TEOS silane film.The surface of sintered NdFeB is coated with a layered three-dimensional network silane film that forms through the condensation of silanol substances.This film provides excellent corrosion resistance to the sintered NdFeB substrate,reducing its corrosion current density to 2.02×10~(-6)A/cm~2.Moreover,the impact of film on the magnetic characteristics of sintered NdFeB was assessed and found to be minimal.

Differences of Uptake and Accumulation of Zinc in Four Species of Sedum

Four species of Sedum L. were grown in nutrient solution for the comparison of their Zn uptake and accumulation. S. alfredii Hance showed much greater tolerance to Zn than the other three species. Shoot and root yields of S. sarmentosum Bunge, S. bulbiferum Makino, and S. emarginatum Migo decreased with increasing Zn concentration in the solution, while shoot and root yields of S. alfredii increased when Zn concentration was ≤80 mg·L -1. At 80 mg·L -1 Zn, Zn concentration in shoots of S. alfredii reached 19.09 mg·g -1. S. alfredii was also more efficient in Zn translocation from roots to shoots, while Zn concentration in shoots was much higher than in roots. However, this was not the case for the other three species. The results showed that S. alfredii is a Zn hyperaccumulator and could be useful for the phytoremediation of Zn-contaminated soils.

Effects of ultrasonic vibration on solidification structure and properties of Mg-8Li-3Al alloy

Ultrasonic vibration was introduced into the Mg-8Li-3A1 alloy melt during its solidification process. The microstructure, corrosion resistance and mechanical properties of the Mg-8Li-3A1 alloy under ultrasonic vibration were investigated. The experiment results show that the morphology of a phase is modified from coarse rosette-like structure to fine globular one with the application of ultrasonic vibration. The fine globular structure is obtained especially when the power is 170 W, and the refining effect also gets better with prolonging the ultrasonic treatment time. The corrosion resistance of the alloy with 170 W of ultrasonic vibration for 90 s is improved apparently compared with the alloy without ultrasonic vibration. The mechanical properties of alloys with ultrasonic vibration are also both improved apparently. The tensile strength and elongation of alloy improve by 9.5% and 45.7%, respectively, with 170 W of ultrasonic treatment for 90 s.

Increased Storability of Haloxylon ammodendron Seeds in Ultra-drying Storage

梭梭 (HaloxylonammodendronBge .)的种子为短命种子 ,在自然状态下 ,种子的含水量为 8.5 % ,寿命约为 10个月。将梭梭种子含水量降至 2 .5 %和 1.4% ,其耐贮藏力增强。经过 5 0℃下 5d和 10d的人工加速老化后 ,超干种子表现出较强的抗老化能力。与对照相比 ,超干种子具有较高的萌发率、活力指数及较长的根 。

Enhanced corrosion resistance of micro-arc oxidation coated magnesium alloy by superhydrophobic Mg-Al layered double hydroxide coating

To further enhance the corrosion resistance of the porous micro-arc oxidation(MAO) ceramic layers on AZ31 magnesium alloy, superhydrophobic Mg-Al layered double hydroxide(LDH) coating was fabricated on MAO-coated AZ31 alloy by using in-situ growth method followed by surface modification with stearic acid. The characteristics of different coatings were investigated by XRD, SEM and EDS. The effect of the hydrothermal treatment time on the formation of the LDH coatings was studied. The results demonstrated that the micro-pores and cracks of MAO coating were gradually sealed via in-situ growing LDH with prolonging hydrothermal treating time. Electrochemical measurement displayed that the lowest corrosion current density, the most positive corrosion potential and the highest impedance modulus were observed for superhydrophobic LDH/MAO coating compared with those of MAO coating and LDH/MAO coating. Immersion experiment proved that the superhydrophobic LDH/MAO coating with the active anti-corrosion capability significantly enhanced the long-term corrosion protection for MAO coated alloy.

Non-invasive means of measuring hepatic fat content

Hepatic steatosis affects 20% to 30% of the general adult population in the western world. Currently, the technique of choice for determining hepatic fat deposition and the stage of fibrosis is liver biopsy. However, it is an invasive procedure and its use is limited, particularly in children. It may also be subject to sampling error. Non-invasive techniques such as ultrasound, computerised tomography (CT), magnetic resonance imaging (MRI) and proton magnetic resonance spectroscopy (1H MRS) can detect hepatic steatosis, but currently cannot distinguish between simple steatosis and steatohepatitis, or stage the degree of fibrosis accurately. Ultrasound is widely used to detect hepatic steatosis, but its sensitivity is reduced in the morbidly obese and also in those with small amounts of fatty infiltration. It has been used to grade hepatic fat content, but this is subjective. CT can detect hepatic steatosis, but exposes subjects to ionising radiation, thus limiting its use in longitudinal studies and in children. Recently, magnetic resonance (MR) techniques using chemical shift imaging have provided a quantitative assessment of the degree of hepatic fatty infiltration, which correlates well with liver biopsy results in the same patients. Similarly, in vivo 1H MRS is a fast, safe, non-invasive method forthe quantification of intrahepatocellular lipid (IHCL) levels. Both techniques will be useful tools in future longitudinal clinical studies, either in examining the natural history of conditions causing hepatic steatosis (e.g. non-alcoholic fatty liver disease), or in testing new treatments for these conditions.

Characterization of mechanical and corrosion properties of cryorolled Al 1100 alloy:Effect of annealing and solution treatment

Effect of annealing and solution treatment prior to cryorolling on the formation of initial structure influencing microstructure formation from nano to micron scale and resultant mechanical and corrosion properties in Al 1100 alloy has been studied in detail.Before subjecting to 50%cryorolling,samples were pre-annealed at 250℃ for 2 h and pre-solution treated at 540℃ for 1 h.X-ray diffraction and HRTEM techniques were used to understand the crystallite size,lattice strain and dislocation configuration in the processed alloy.The results indicate that the pre-annealed sample has the highest grain aspect ratio(4.43),the smallest crystallite size(37.53 nm),the highest lattice strain(9.12×10^(−3))and the highest dislocation density(45.16×10^(13) m^(−2))among the tested sample.The pre-annealed sample shows a significant improvement of 43.44%,24.64%and 20.33%in hardness,ultimate tensile strength and yield strength.Both pre-annealed and pre-solution treated samples show improved corrosion resistance when compared to cryorolled samples without any pre-treatment,with the pre-annealed sample showing the best corrosion resistance.

Freezing and Thawing Durability of Ultra High Strength Concrete

Resistance to freezing and thawing of two UHSC （ultra high strength concrete） mixtures was evaluated in accordance with ASTM C 666 Procedure A. The two mixtures （plain and fiber reinforced） were developed using materials local to southern New Mexico, USA. Three different curing regimens were investigated for the mixture with fibers and one curing regimen was studied for the mixture without fibers. All curing regimens included 24 h of ambient curing followed by four days of wet curing at 50 ℃, and then two days dry curing at 200 ℃. At an age of seven days, one batch of fiber reinforced specimens was air cured at ambient conditions for the following six days and then placed in a water bath at 4.4 ℃ for 24 h prior to initiating freezing and thawing cycles. The second batch was air cured from day seven to day 12, and then wet cured for one day at 23 ℃ prior to being placed in the 4.4 ℃ water bath. The final batch was wet cured at 23 ℃ from the seventh day to an age of 13 days and then placed in the 4.4 ℃ water bath. The mixture with no fibers was air cured from the seventh day to an age of 12 days and then wet cured for one day at 23 ℃ prior to being placed in the 4.4 ℃ water bath. Higher moisture levels during curing produced greater initial dynamic elastic modulus values and durability factors at the end of the freezing and thawing tests, with the greatest durability factor being 87.5. Steel fibers were observed to improve both compressive strength and durability factor for UHSC.

Design of multi-functional dual hole patterned carbon nanotube composites with superhydrophobicity and durability

Most current research on nanocomposites has focused on their bulk attributes, i.e., electrical, microwave, thermal, and mechanical properties. In practical applications, surface properties such as robustness against environmental contamination are critical design considerations if intrinsic properties are to be maintained. The aim of this research is to combine the bulk properties of nanocomposites with the superhydrophobic surface properties provided by imprinting techniques to create a single multi-functional system with enhanced bulk properties. We report the development of a highly conductive superhydrophobic nanotube composite, which is directly superimposed with a durable dual hole pattern through imprinting techniques. The dual hole pattern avoids the use of high slenderness ratio structures resulting in a surface which is robust against physical damage. Its stable superhydrophobic properties were characterized both theoretically and experimentally. By incorporating high aspect ratio carbon nanotubes （CNTs）, the dual patterned composites can also be effectively used for anti-icing and deicing applications where their superhydrophobic surface suppresses ice formation and their quick electric heating response at low voltage eliminates remaining frost. In addition, superior electromagnetic interference （EMI） shielding effectiveness （SE） was attained, with one of the highest values ever reported in the literature.

Cellular Tolerance, Accumulation and Distribution of Cadmium in Leaves of Hyperaccumulator Picris divaricata

Knowledge of cellular metal homeostasis will provide a better understanding of the mechanisms involved in metal tolerance and hyperaccumulation in metal-hyperaccumulating plants. Energy dispersive X-ray spectrometry （EDS） was used to determine the localization of cadmium （Cd） in leaves of the Zn/Cd hyperaccumulator Picris divaricata which had a shoot Cd concentration of 565 mg kg-1 after 2 weeks of growth in solution culture supplying 10μ tmol L^-1 CdCl2. The results indicated that Cd was distributed mainly in the trichomes, upper and lower epidermis and bundle sheath cells, with a relatively low level of Cd in mesophyll cells. Mesophyll protoplasts isolated from leaves remained viable after 24 h exposure to CdCl2 at a concentration up to 1 mmol L^-1, indicating their high tolerance to Cd. The intracellular Cd was visualized by staining with Leadmium Green dye, a cellular permeable Cd fluorescence probe. The results showed that the majority of protoplasts （〉 82%） did not accumulate Cd, with only a minority （〈 18%） showing Cd accumulation. In the Cd-accumulating protoplasts, Cd accumulation was depressed by the addition of Fe^2＋, Mn^2＋ and the metabolic inhibitor carbonyl cyanide m-chlorophenylhydrazone （CCCP）, but not by Ca^2＋ or Zn^2＋. Furthermore, the entire process of Cd uptake from external solution into the cytoplasm and subsequent sequestration into vacuoles was successfully recorded by confocal images. These results suggested that reduced cellular Cd accumulation and efficient Cd vacuolar sequestration in mesophyll cells might be responsible for cellular Cd tolerance and distribution in the leaves of P. divaricata.