A highly efficient and re liable topology-dual buck half bridge inverter (DBI) is introduced. The existenc e of discontinuous conduction mode (DCM) operation state requires the bias of in du ctor current for DBI imple...A highly efficient and re liable topology-dual buck half bridge inverter (DBI) is introduced. The existenc e of discontinuous conduction mode (DCM) operation state requires the bias of in du ctor current for DBI implemented with linear controllers like ramp comparison SP WM (RCSPWM) controllers. A novel operation scheme for DBI and a hysteresis curre nt controlled dual buck half bridge inverter (HCDBI) are proposed. The bias curr ent required by RCSPWM DBI is eliminated and conduction losses are dramatically reduced. HCDBI has greatly improved the modulation performance in DCM region for the benefit of its excellent command tracking capability. The operational schem e and control strategy are presented. Power losses of the conventional half brid ge inverter (CHBI) and HCDBI are compared with mathematical computation, and exp erimental verification is also executed. Both calculational and experimental res ults verify that HCDBI has a superior switching performance over CHBI. Its exce llent high frequency operational capacity provides another access to realize high fre quency operation of inverters.展开更多
A monolithic microwave integrated circuit （MMIC） power amplifier （PA） is proposed. It adopts a new on-chip bias circuit, which not only avoids the instability of the direct current bias caused by the change in the...A monolithic microwave integrated circuit （MMIC） power amplifier （PA） is proposed. It adopts a new on-chip bias circuit, which not only avoids the instability of the direct current bias caused by the change in the power supply and temperature, but also compensates deviations caused by the increase in input power. The bias circuit is a current-mirror configuration, and the feedback circuit helps to maintain bias voltage at a constant level. The gain of the feedback circuit is improved by the addition of a non-inverting amplifier within the feedback circuit. A shunt capacitor at the base node of the active bias transistor enhances the linearity of the PA. The chip is fabricated in an InGaP/GaAs heterojunction bipolar transistor （HBT） process. Measured results exhibit a 26. 6-dBm output compression point, 33.6% power-added efficiency （PAE） and - 40.2 dBc adjacent channel power ratio （ACPR） for wide-band code division multiple access （W-CDMA） applications.展开更多
A simple graph G on n vettices is said to be a simple MCD-graph if G has no two cyties having the same length and has the maximum possible number of edges.Two results of the number of cy cles in G are given by introdu...A simple graph G on n vettices is said to be a simple MCD-graph if G has no two cyties having the same length and has the maximum possible number of edges.Two results of the number of cy cles in G are given by introdueing the Concept of a path decomposition and by them,the following theorem is proved:If G is a simple MCD-graph,then G is not a 2-connected planar graph and for all n except seven integer,G is not a 2-connected graph on n vertices containing a subgraph homeomor phic to K_4.展开更多
A compact Ka-band monolithic microwave integrated circuit(MMIC) voltage controlled oscillator (VCO) with wide tuning range and high output power,which is based on GaAs PHEMT process,is presented.A method is introduced...A compact Ka-band monolithic microwave integrated circuit(MMIC) voltage controlled oscillator (VCO) with wide tuning range and high output power,which is based on GaAs PHEMT process,is presented.A method is introduced to reduce the chip size and to increase the bandwidth of operation.The procedure to design a MMIC VCO is also described here.The measured oscillating frequency of the MMIC VCO is 36±1.2GHz and the output power is 10±1dBm.The fabricated MMIC chip size is 1.3mm×1.0mm.展开更多
A binary continuum model for dendritic solidification transport phenomena and corresponding numerical algorithm for the strong nonlinear coupling of T-fS-CL were extended to multicomponent alloys solidified under cond...A binary continuum model for dendritic solidification transport phenomena and corresponding numerical algorithm for the strong nonlinear coupling of T-fS-CL were extended to multicomponent alloys solidified under condition of Biot≤0.1. Based on the extended model/algorithm, a method considering heat transfer was proposed to predict the solidification paths and microsegregation of alloys solidified under the same condition. The new algorithm and method were closely coupled with the commercial Thermo-Calc package via its TQ6-interface codes for instantaneous determination of the related thermodynamic data at each calculation time step. The sample simulation performed on an Al-2Si-3Mg alloy system indicates the availability and reliability of the model/algorithm and the proposed method for predicting solidification paths and microsegregation. Computional and experimental investigations on an Al-5.17Cu-2.63Si ternary alloy were conducted, and a reasonable agreement between the computation and experiment was obtained.展开更多
The electrochemical migration（ECM） behavior and mechanism of immersion silver processing circuit board（PCB-ImAg）and hot air solder leveling circuit board（PCB-HASL） under the 0.1 mol/L Na2SO4 absorbed thin liquid...The electrochemical migration（ECM） behavior and mechanism of immersion silver processing circuit board（PCB-ImAg）and hot air solder leveling circuit board（PCB-HASL） under the 0.1 mol/L Na2SO4 absorbed thin liquid films with different thicknesses were investigated using stereo microscopy and scanning electron microscopy（SEM）.Meanwhile,the corrosion tendency and kinetics rule of metal plates after bias application were analyzed with the aid of electrochemical impedance spectroscopy（EIS）and scanning Kelvin probe（SKP）.Results showed that under different humidity conditions,the amount of migrating corrosion products of silver for PCB-ImAg was limited,while on PCB-HASL both copper dendrites and precipitates such as sulfate and metal oxides of copper/tin were found under a high humidity condition（exceeding 85%）.SKP results indicated that the cathode plate of two kinds of PCB materials had a higher corrosion tendency after bias application.An ECM model involving multi-metal reactions was proposed and the differences of ECM behaviors for two kinds of PCB materials were compared.展开更多
A recent study has revealed a full 3-dimentional reactive scattering picture of the reaction CI＋CHD3（v1=1） as the C1 atoms attack CHD3 from various directions respective to the C-H stretching bond. The reported pol...A recent study has revealed a full 3-dimentional reactive scattering picture of the reaction CI＋CHD3（v1=1） as the C1 atoms attack CHD3 from various directions respective to the C-H stretching bond. The reported polarization-dependent differential cross sections provide the most detailed characterization of the influences of reagent alignments on reactivity. To convey the stereo-specific information more accessible to general chemists, we show here, by proper symmetry considerations, how to retrieve from the measurements the relative integral and differential cross sections of two most common collision geometries： the end-on versus side-on attacks. The results, albeit coarse-grained, provide an appealing picture that not only reinforces our intuition about chemical reactivity, but also sheds more light on the conventional （unpolarized） attributes.展开更多
A 32-channel 50 GHz spaced arrayed-waveguide grating(AWG) with our innovative configuration has been designed and fabricated.The performance of the device has been fully tested by using a system that consists of a tun...A 32-channel 50 GHz spaced arrayed-waveguide grating(AWG) with our innovative configuration has been designed and fabricated.The performance of the device has been fully tested by using a system that consists of a tunable laser light source (TLS), an optical power meter and a polarization controller.The insertion loss (IS) of the device is 4.2-7.4 dB.The crosstalk is about -28 dB.The IS uniformity is less than 3.3 dB.With our configuration,the performance of the device has been enhanced effectively and the difficulty in alignment process has been decreased obviously.展开更多
Starting from a Backlund transformation and taking a special ansatz for the function f, we can obtain a much more generalexpression of solution that includes some variable separated functions for the higher-order Broe...Starting from a Backlund transformation and taking a special ansatz for the function f, we can obtain a much more generalexpression of solution that includes some variable separated functions for the higher-order Broer-Kaup system. From this expression, we investigate the interactions of localized coherent structures such as the multi-solitonic excitations and find the novel phenomenon that their interactions have non-elastic behavior because the fission/fusion may occur after the interaction of each localized coherent structure.展开更多
文摘A highly efficient and re liable topology-dual buck half bridge inverter (DBI) is introduced. The existenc e of discontinuous conduction mode (DCM) operation state requires the bias of in du ctor current for DBI implemented with linear controllers like ramp comparison SP WM (RCSPWM) controllers. A novel operation scheme for DBI and a hysteresis curre nt controlled dual buck half bridge inverter (HCDBI) are proposed. The bias curr ent required by RCSPWM DBI is eliminated and conduction losses are dramatically reduced. HCDBI has greatly improved the modulation performance in DCM region for the benefit of its excellent command tracking capability. The operational schem e and control strategy are presented. Power losses of the conventional half brid ge inverter (CHBI) and HCDBI are compared with mathematical computation, and exp erimental verification is also executed. Both calculational and experimental res ults verify that HCDBI has a superior switching performance over CHBI. Its exce llent high frequency operational capacity provides another access to realize high fre quency operation of inverters.
基金The National High Technology Research and Development Program of China(863 Program)(No.2009AA01Z260)
文摘A monolithic microwave integrated circuit （MMIC） power amplifier （PA） is proposed. It adopts a new on-chip bias circuit, which not only avoids the instability of the direct current bias caused by the change in the power supply and temperature, but also compensates deviations caused by the increase in input power. The bias circuit is a current-mirror configuration, and the feedback circuit helps to maintain bias voltage at a constant level. The gain of the feedback circuit is improved by the addition of a non-inverting amplifier within the feedback circuit. A shunt capacitor at the base node of the active bias transistor enhances the linearity of the PA. The chip is fabricated in an InGaP/GaAs heterojunction bipolar transistor （HBT） process. Measured results exhibit a 26. 6-dBm output compression point, 33.6% power-added efficiency （PAE） and - 40.2 dBc adjacent channel power ratio （ACPR） for wide-band code division multiple access （W-CDMA） applications.
文摘A simple graph G on n vettices is said to be a simple MCD-graph if G has no two cyties having the same length and has the maximum possible number of edges.Two results of the number of cy cles in G are given by introdueing the Concept of a path decomposition and by them,the following theorem is proved:If G is a simple MCD-graph,then G is not a 2-connected planar graph and for all n except seven integer,G is not a 2-connected graph on n vertices containing a subgraph homeomor phic to K_4.
文摘A compact Ka-band monolithic microwave integrated circuit(MMIC) voltage controlled oscillator (VCO) with wide tuning range and high output power,which is based on GaAs PHEMT process,is presented.A method is introduced to reduce the chip size and to increase the bandwidth of operation.The procedure to design a MMIC VCO is also described here.The measured oscillating frequency of the MMIC VCO is 36±1.2GHz and the output power is 10±1dBm.The fabricated MMIC chip size is 1.3mm×1.0mm.
基金Projects (2008112042) supported by the Open Project of State Key Laboratory of Powder Metallurgy of Central South University, ChinaProjects (50771041, 50801019) supported by the National Natural Science Foundation of ChinaProject (2011CB610406) supported by the National Basic Research Program of China
文摘A binary continuum model for dendritic solidification transport phenomena and corresponding numerical algorithm for the strong nonlinear coupling of T-fS-CL were extended to multicomponent alloys solidified under condition of Biot≤0.1. Based on the extended model/algorithm, a method considering heat transfer was proposed to predict the solidification paths and microsegregation of alloys solidified under the same condition. The new algorithm and method were closely coupled with the commercial Thermo-Calc package via its TQ6-interface codes for instantaneous determination of the related thermodynamic data at each calculation time step. The sample simulation performed on an Al-2Si-3Mg alloy system indicates the availability and reliability of the model/algorithm and the proposed method for predicting solidification paths and microsegregation. Computional and experimental investigations on an Al-5.17Cu-2.63Si ternary alloy were conducted, and a reasonable agreement between the computation and experiment was obtained.
基金Project(51271032)supported by the National Natural Science Foundation of China
文摘The electrochemical migration（ECM） behavior and mechanism of immersion silver processing circuit board（PCB-ImAg）and hot air solder leveling circuit board（PCB-HASL） under the 0.1 mol/L Na2SO4 absorbed thin liquid films with different thicknesses were investigated using stereo microscopy and scanning electron microscopy（SEM）.Meanwhile,the corrosion tendency and kinetics rule of metal plates after bias application were analyzed with the aid of electrochemical impedance spectroscopy（EIS）and scanning Kelvin probe（SKP）.Results showed that under different humidity conditions,the amount of migrating corrosion products of silver for PCB-ImAg was limited,while on PCB-HASL both copper dendrites and precipitates such as sulfate and metal oxides of copper/tin were found under a high humidity condition（exceeding 85%）.SKP results indicated that the cathode plate of two kinds of PCB materials had a higher corrosion tendency after bias application.An ECM model involving multi-metal reactions was proposed and the differences of ECM behaviors for two kinds of PCB materials were compared.
文摘A recent study has revealed a full 3-dimentional reactive scattering picture of the reaction CI＋CHD3（v1=1） as the C1 atoms attack CHD3 from various directions respective to the C-H stretching bond. The reported polarization-dependent differential cross sections provide the most detailed characterization of the influences of reagent alignments on reactivity. To convey the stereo-specific information more accessible to general chemists, we show here, by proper symmetry considerations, how to retrieve from the measurements the relative integral and differential cross sections of two most common collision geometries： the end-on versus side-on attacks. The results, albeit coarse-grained, provide an appealing picture that not only reinforces our intuition about chemical reactivity, but also sheds more light on the conventional （unpolarized） attributes.
基金Project supported by Nation Key Basic R&D Plan of China(G2000036602) ,and the National Natural Science Foundation ofChina(No.69889701)
文摘A 32-channel 50 GHz spaced arrayed-waveguide grating(AWG) with our innovative configuration has been designed and fabricated.The performance of the device has been fully tested by using a system that consists of a tunable laser light source (TLS), an optical power meter and a polarization controller.The insertion loss (IS) of the device is 4.2-7.4 dB.The crosstalk is about -28 dB.The IS uniformity is less than 3.3 dB.With our configuration,the performance of the device has been enhanced effectively and the difficulty in alignment process has been decreased obviously.
文摘Starting from a Backlund transformation and taking a special ansatz for the function f, we can obtain a much more generalexpression of solution that includes some variable separated functions for the higher-order Broer-Kaup system. From this expression, we investigate the interactions of localized coherent structures such as the multi-solitonic excitations and find the novel phenomenon that their interactions have non-elastic behavior because the fission/fusion may occur after the interaction of each localized coherent structure.
