Halin图的一些路分解

本文证明了：若Ｇ是Ｈａｌｉｎ图，则Ｇ的线性荫度为［△（Ｇ）／２］，点荫度和线性点荫度为２，路分解数等于它的奇数度顶点的一半。

Effects of cold rolling path on recrystallization behavior and mechanical properties of pure copper during annealing

The recrystallization behavior,grain boundary characteristic distribution,and mechanical properties of pure Cu sheets that were subjected to different cold rolling paths,and then annealed at 400°C for 10,30,60,and 420 min,were investigated.Different rolling paths changed the grain boundary orientations of cold-rolled copper,causing recrystallized grains to nucleate and grow in an oriented manner.However,the evolution of the texture indicated that cold-rolled copper with different rolling paths did not show an obvious preferred orientation after annealing.The RD-60 specimen exhibited the smallest grain size(6.6μm).The results indicated that the grain size and low-ΣCSL grain boundaries worked together to provide RD-60 samples with appropriate mechanical properties and high plasticity.The yield strength,ultimate tensile strength,and elongation of RD-60 sample were 81 MPa,230 MPa,and 49%,respectively.These results could provide guidance for tuning the microstructures and properties of pure Cu foils,as well as designing fabrication routes for pure Cu foils through processes such as rolling and drawing.

低压交流断路器直流分断能力的计算及校验

介绍了低压交流断路器直流短路分断能力的计算方法，并列出了计算结果；介绍了根据系统短路回路功率因数、时间常数和断路器试验回路的功率因数、时间常数计算校正系数校正系统短路电流；按校正后的短路电流选择断路器的分断能力、校验接通能力和直流短路分断能力。列出了10kV、20kV和3SkV变电所1600kV·A、2000kV·A和2500kV·A配电变压器低压侧断路器选择和校验的结果。

白酒产业转型升级路径分析研究——以泸州为例

白酒产业是泸州市特色优势产业,为泸州经济社会发展做出了重要贡献。进入“十四五”时期,泸州市白酒产业面临白酒产业政策调整、新冠肺炎疫情、中美贸易争端以及中国加快构建“双循环”新发展格局等机遇和挑战。为探究新形势下泸州市白酒制造业转型升级路径,本研究通过梳理文献、深入调研、座谈等方法,从行业发展的角度入手,系统梳理相关文献,对泸州白酒产业现状、面临形势进行了分析,并在此基础上提出了创新发展、绿色发展、融合发展三个方面的建议。

Correlation and Path Analysis for Growth Traits in F_1 Population of Pearl Oyster Pinctada martensii

120 pearl oysters （Pinctada martensii） were randomly sampled from F1 population, and shell length, shell width, shell height, shell weight and total weight of each sample were measured. Correlation and path analysis were conducted on the basis of measurement data. The results showed that shell length, shell width, shell height, shell weight and total weight were significantly correlated （P 〈 0.05）. Total weight was significantly and positively correlated with shell weight （r = 0.8970）, shell height （r = 0.6974）, shell width （r = 0.6521） and shell length （r = 0.5486）. Shell weight, shell height, shell width and shell length had positive and direct effects on total wet weight, with the values of 0.6356, 0.1872, 0.1814 and 0.0599, respectively. The results indicated that growth traits （shell length, shell width, shell height, shell weight and total wet weigh） of the F1 population could be improved by direct or indirect selection.

Correlation and path coefficient analysis for phenotypic traits of noble scallop Chlamys nobilis

In April of 2006, a base population of the noble scallop Chlamys nobilis was established by collecting parental breeders from the stocks in Wushi, Zhanjiang. In December of 2006, 200 individuals were randomly sampled from the base population and subjected for correlation and path coefficient analysis. It was found that there were statistically significant phenotypic correlations among the traits （P 〈 0.01）. Total weight was significantly and positively correlated with the shell length （r = 0.934 3）, shell height （r = 0.895 9）, shell width （r = 0.899 1 ）, muscle weight （r = 0.882 0） and shell weight （r = 0.937 9）, respectively. Shell length, shell width, muscle weight, shell height and shell weight had positive and direct effects on the total weight, with values of 0.397 1, 0.321 9, 0.172 1, 0.089 6 and 0.066 9, respectively. Shell length, shell width and muscle weight had higher direct effects on the total weight than shell height and shell weight. A combined evaluation of correlation, direct effects and indirect effects showed that direct selection for shell length, shell width, muscle weight, shell height and shell weight would be effective to improving the total weight. It was concluded that these traits could be regarded as the selection criteria in breeding programs of the species.

A CMOS Low Power Fully Differential Sigma-Delta Frequency Synthesizer for 2Mb/s GMSK Modulation

A CMOS fully-differential 2.4GHz ∑-△ frequency synthesizer for Gaussian minimum shift keying （GMSK）modulation is presented. A pre-compensation fractional-N phase-locked loop（PLL）is adopted in the modulator.The transfer function of the type- Ⅱ third-order phase-locked loop is deduced,and the important parameters that affect the loop transfer function are pointed out. Methods to calibrate the important loop parameters arc introduced. A differential tuned LC-VCO and a fully-differential charge pump are adopted in the PLL design. The designed circuits are simulated in a 0.18gm 1P6M CMOS process. The power consumption of the PLL is only about llmW with the low power consideration in building blocks design, and the data rate of the modulator can reach 2Mb/s.

A 2GHz Low Power Differentially Tuned CMOS Monolithic LC-VCO

A 2GHz differentially tuned CMOS monolithic LC-VCO is designed and fabricated in a 0.18μm CMOS process. The VCO has a 16.15% tuning range （from 1. 8998 to 2. 2335GHz） through a combination of analog and digital tuning techniques （4-bit binary switch-capacitor array）. The measured phase noise is - 118.17dBc/Hz at a 1MHz offset from a 2. 158GHz carrier. With the presented improved switch,the phase noise varies no more than 3dB at different digital control bits. The phase noise changes only by about 2dB in the tuning range because of the pn-junctions as the varactors. The VCO draws a current of about 2. lmA from a 1.8V power supply and works normally with a 1.5V power supply.

A distributed on-demand bandwidth-constrained multicast routing protocol for wireless ad hoc networks

To meet the bandwidth requirement for the multicasting data flow in ad hoc networks, a distributed on- demand bandwidth-constrained multicast routing （BCMR） protocol for wireless ad hoc networks is proposed. With this protocol, the resource reservation table of each node will record the bandwidth requirements of data flows, which access itself, its neighbor nodes and hidden nodes, and every node calculates the remaining available bandwidth by deducting the bandwidth reserved in the resource reservation table from the total available bandwidth of the node. Moreover, the BCMR searches in a distributed manner for the paths with the shortest delay conditioned by the bandwidth constraint. Simulation results demonstrate the good performance of BCMR in terms of packet delivery reliability and the delay. BCMR can meet the requirements of real time communication and can be used in the multicast applications with low mobility in wireless ad hoc networks.

Prediction method of highway pavement rutting based on the grey theory

In order to make a scientific pavement maintenance decision, a grey-theory-based prediction methodological framework is proposed to predict pavement performance. Based on the field pavement rutting data,analysis of variance （ANOVA）was first used to study the influence of different factors on pavement rutting. Cluster analysis was then employed to investigate the rutting development trend.Based on the clustering results,the grey theory was applied to build pavement rutting models for each cluster, which can effectively reduce the complexity of the predictive model.The results show that axial load and asphalt binder type play important roles in rutting development.The prediction model is capable of capturing the uncertainty in the pavement performance prediction process and can meet the requirements of highway pavement maintenance,and,therefore,has a wide application prospects.

Methane concentration detection system based on differential infrared absorption

The infrared absorption method for methane concentration detection is an ideal way to detect methane at present. However, it is difficult to spread this method due to its high cost. In this paper, by using a wideband infrared light emitting di- ode （LED） accompanied with a PIN photo electric diode, a low-cost methane detection system was designed. To overcome the shortcomings caused by the wide working band, a differential light path was designed. By means of a differential ratio algo- rithm, the stability and the accuracy of the system were guaranteed. Finally, the validity of the system with the proposed algo- rithm was verified by the experiment results.

Synthesis and photoluminescence properties of single-crystal ZnO hexagonal pyramids by PEG400-assisted thermal decomposition route

Large-scale synthesis of ZnO hexagonal pyramids was achieved by a simple thermal decomposition route of precursor at 240 oC in the presence of PEG400. The precursor was obtained by room-temperature solid-state grinding reaction between Zn（CH3COO）2-2H2O and Na2CO3. Crystal structure and morphology of the products were analyzed and characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and high-resolution transmission electron microscopy （HRTEM）. The results of further experiments show that PEG400 has an important role in the formation of ZnO hexagonal pyramids. Difference between the single and double hexagonal pyramid structure may come from the special thermal decomposition reaction. The photoluminescence （PL） spectra of ZnO hexagonal pyramids exhibit strong near-band-edge emission at about 386 nm and weak green emission at about 550 nm. The Raman-active vibration at about 435 cm-1 suggests that the ZnO hexagonal pyramids have high crystallinity.

A Temperature-Autocompensated Detecting Circuit for the Capacitance Fuze

In view of drastic possible changes in fuze environment tempera- ture,a kind of temperature autocompensated detecting circuit for the capaci- tance fuze is proposed.It provides a steady detected output when the envi- ronment temperature varies from-50℃ to 65℃ and keeps a stable detecting sensitivity.Based on an analysis of the circuit,influence of the major param- eters of the oscillating circuit on the amplitude are explored.A few impor- tant controllable parameters affecting the circuit feature are found out.A parameter-control method is given in order to improve the circuit perfor- mance.

Circuit-Level Analysis on Opto-Electronic Characteristics of Ferroelectric Liquid Crystal

We propose an electronic model in Spice, instead of traditional mathematical analysis, for analyzing the performance of ferroelectric liquid crystal （FLC） under various working conditions. Using this equivalent circuit model,it is easy to simulate and analyze the behavior of an FLC layer in three different typical parameters,including temperature, input light wavelength, and the frequency of driving voltage. We conclude that the response velocity drops as the wavelength increases in the range of visible light, and for the parameter of temperature, the velocity reaches its lowest value when the temperature reaches a certain degree,meanwhile,the frequency of driving voltage exerts important effects on the response velocity only when the frequency is beyond a critical value. Excellent agreement is achieved between simulation and experimental results.

An Integratable Distributed Bragg Reflector Laser by Low-Energy Ion Implantation Induced Quantum Well Intermixing

An integratable distributed Bragg reflector laser is fabricated by low energy ion implantation induced quantum well intermixing.A 4 6nm quasi continuous wavelength tuning range is achieved by controlling phase current and grating current simultaneously,and side mode suppression ratio maintains over 30dB throughout the tuning range except a few mode jump points.

Mechanics analysis of vehicle bumping at approach slabs with superelevation

In order to analyze the pavement stress caused by vehicle bumping at an approach slab, a simplified four-wheeled bi- axle vehicle-moving model is proposed. The effect of damping and vibration reduction in the process of vehicle-moving is not considered. Based on the position change of vehicle wheels at the approach slab, the vehicle dynamic vibration equations are summarized. Meanwhile, the undetermined coefficients of the vibration equations are obtained using the boundary and initial conditions of the vehicle. The analytical motion solutions of rear and front wheels at different stages are concluded. Consequently, a four-wheeled vehicle model is developed and vibration equations are provided, which can be used to analyze the impact of complicated stress on pavement. The results show that the excessive stress and stress concentration will occur at the approach slab, and it needs to be strengthened.

An Analysis on the Mechanism Governing the Effect of Bomb Length upon the Sensitivity of Detection of a Capacitance Fuze

For a detector in a capacitanee fuze working in an electrostatic field, the bomblength (effective length of the conductor part) is an important factor affecting the sensitivityof detection. For the two different kinds of detecting circuit models in general use (the frequency-sensitive and the amplitude-coupling ), mechanism of the effect of bomblength on the sensitvity of detection is analyzed. Through the analysis a conclusion in fullagreement with experimental results has been drawn, that is. the longer the bomb length,the higher the sensitivity, on the condition that the sizes and the sites of the detecting electrodes and bomb diameter remain unchanged.

Modeling GPS multipath effect based on spherical cap harmonic analysis

Most GPS positioning errors can be eliminated or removed by the differential technique or the modeling method,but the multipath effect is a special kind of system or gross error,so it is difficult to be simulated or eliminated.In order to improve the accuracy of GPS positioning,the single-epoch pseudorange multipath effects at GPS station were calculated,and firstly modeled based on the spherical cap harmonic（SCH）,which is the function of satellite longitude and latitude with the robust method.The accuracy of the kinematic point positioning technique was improved by correcting pseudorange observations with the multipath effect calculated by the SCH model,especially in the elevation direction.The spherical cap harmonic can be used to model the pseudorange multipath effect.

MULTI-CLASS TRAFFIC QOS ROUTING FOR LEO SATELLITE NETWORKS

Due to the diversified demands of quality of service（QoS） in volume multimedia application, QoS routings for multiservice are becoming a research hotspot in low earth orbit（LEO） satellite networks. A novel QoS satellite routing algorithm for multi-class traffic is proposed. The goal of the routing algorithm is to provide the distinct QoS for different traffic classes and improve the utilization of network resources. Traffic is classified into three classes and allocated priorities based on their QoS requirements, respectively. A priority queuing mechanism guarantees the algorithm to work better for high-priority classes. In order to control the congestion, a blocking probability analysis model is built up based on the Markov process theory. Finally, according to the classification link-cost metrics, routings for different classes are calculated with the distinct QoS requirments and the status of network resource. Simulations verify the performance of the routing algorithm at different time and in different regions, and results demonstrate that the algorithm has great advantages in terms of the average delay and the blocking probability. Meanwhile, the robustness issue is also discussed.

PATH DEPENDENCE OF J-INTEGRAL IN WELDED JOINT WITH AN OVERMATCHING WELD

By elastic-plastic finite deformation finite element analysis (FEA), the conservation of J-integral is investigated in detail for a welded joint with an overmatchingweld in plane stress case. It is indicated that J-integral is path dependent under various conditions at least in the cases studied in this paper. Meanwhile, the above conclusions are verified by the hybrid method results in which combined Moire interferometry with FEA.