A scheme of a frequency-hopping frequency-synthesizer applied to a Bluetooth ratio frequency （RF） front-end is presented,and design of a voltage controlled oscillator （VCO） and dual-modulus prescaler are focused o...A scheme of a frequency-hopping frequency-synthesizer applied to a Bluetooth ratio frequency （RF） front-end is presented,and design of a voltage controlled oscillator （VCO） and dual-modulus prescaler are focused on.It is fabricated in a 0.18 μm mixed-signal CMOS （complementary metal-oxide-semiconductor transistor） process.The power dissipation of VCO is low and a stable performance is gained.The measured phase noise of VCO at 2.4 GHz is less than -114.32 dBc/Hz.The structure of the DMP is optimized and a novel D-latch integrated with ＂OR＂ logic gate is used.The measured results show that the chip can work well under a 1.8 V power supply.The power dissipation of the core part in a dual modulus prescaler is only 5.76 mW.An RMS jitter of 2 ps is measured on the output signal at 118.3 MHz.It is less than 0.02% of the clock period.展开更多
The purpose of this study is to suppress the fluctuations of surge by a simple passive control method. A bouncing ball system with different weight of the balls was tested. As a result, the bouncing ball system suppre...The purpose of this study is to suppress the fluctuations of surge by a simple passive control method. A bouncing ball system with different weight of the balls was tested. As a result, the bouncing ball system suppressed mild surge without the deterioration of the performance characteristics, and moved the initiation point of surge toward the lower flow rate when the steel ball of 15mm outer diameter was used. The present system was effective to suppress the surge and to widen the stable operating range of a centrifugal compressor when the ball was chosen appropriately.展开更多
文摘A scheme of a frequency-hopping frequency-synthesizer applied to a Bluetooth ratio frequency （RF） front-end is presented,and design of a voltage controlled oscillator （VCO） and dual-modulus prescaler are focused on.It is fabricated in a 0.18 μm mixed-signal CMOS （complementary metal-oxide-semiconductor transistor） process.The power dissipation of VCO is low and a stable performance is gained.The measured phase noise of VCO at 2.4 GHz is less than -114.32 dBc/Hz.The structure of the DMP is optimized and a novel D-latch integrated with ＂OR＂ logic gate is used.The measured results show that the chip can work well under a 1.8 V power supply.The power dissipation of the core part in a dual modulus prescaler is only 5.76 mW.An RMS jitter of 2 ps is measured on the output signal at 118.3 MHz.It is less than 0.02% of the clock period.
文摘The purpose of this study is to suppress the fluctuations of surge by a simple passive control method. A bouncing ball system with different weight of the balls was tested. As a result, the bouncing ball system suppressed mild surge without the deterioration of the performance characteristics, and moved the initiation point of surge toward the lower flow rate when the steel ball of 15mm outer diameter was used. The present system was effective to suppress the surge and to widen the stable operating range of a centrifugal compressor when the ball was chosen appropriately.
