考虑弹头滚转姿态变化影响的防热层厚度优化

基于气动热/结构温度响应耦合计算方法,研究了弹头固定攻角再入条件下锥身典型子午面结构温度响应特性,以及滚转姿态变化时刻对各子午面结构温度响应的影响,建立了考虑弹头滚转姿态变化影响的防热层厚度优化方法,并基于该方法开展了弹头防热层厚度优化。最后,研究了滚转姿态变化次数对优化效果的影响。结果表明:在再入弹道前段进行滚转姿态变化可使外壁面气动加热量更为合理,有效降低弹体锥身壳体内壁面温升。当迎、背风面壳体内壁面最大温升约束为25 K时,与无滚转姿态变化状态下相比,滚转姿态变化设计可使防热层厚度减小0.725 mm,减小幅度为5.4%。通过与滚转姿态变化时刻的联合设计可有效降低锥身防热层厚度。与单次滚转姿态变化时相比,两次滚转姿态变化时防热层厚度减小量仅增大1.9%,增加滚转姿态变化次数对优化效果影响较小。

基于LDFAL及SDFAL周期指数的锦州地区旱涝急转特征变化分析

结合LDFAL(长周期)和SDFAL(短周期)指数对锦州地区旱涝急转变化特征进行分析。结果表明:锦州地区长周期发生旱涝急转的概率较小,7—8月出现“旱转涝”短周期的概率较高。锦州地区1956—2018年旱涝急转长周期指数呈现递减变化,但变化趋势不显著,而旱涝急转短周期指数呈现递增变化,具有较为显著的变化趋势。

气候变化对呼伦贝尔草原生态环境的影响

浅析了气候变化对呼伦贝尔生态环境的影响效应,转型期气候对呼伦贝尔草原生态环境的严重威胁,以及生态环境发生变化和不合理人类活动的干扰;分析了引起草原植被退化、土层风蚀损失、沙漠化速度加快而失去平衡等的原因。

渭河盆地地形变特征研究

结合城市活断层探测结果、形变场地和GPS观测资料,分析2001—2008年渭河盆地水准剖面差异变化与活动断裂、城镇分布以及地下水位的关系,研究断裂垂直活动速率梯度在同一断裂和不同断裂上表现出的差异现象,特别是对2004年至今渭河盆地下沉变化趋缓、泾阳以北呈现出显著的反转变化这一活动特征进行探讨。

Physiological Character and Gene Mapping in a New Green-revertible Albino Mutant in Rice

A green-revertible albino mutant-Qiufeng M was found from the japonica rice （Oryza sativa L. ssp. japonica） Qiufeng in the field. The first three leaves of the mutant were albino with some green. The leaf color became pale green since the fourth leaf and the glume had the same phenomenon as the first three leaves. The measuring data of the pigment content confirmed the visually observed results. It truly had a remarkable changing process in the leaf color in Qiufeng M. Comparison of the main agronomic characters between Qiufeng and Qiufeng M indicated that the neck length and grain weight showed significant difference at the 1% level, and other characters were not different. Genetic analysis showed that the green-revertible albino trait was controlled by a single recessive nucleic gene. Using 209 recessive mutant individuals in the F2 population derived from the cross Pei＇ai 64S × Qiufeng M, a gene, tentatively named gra（t）, was located between the SSR markers of RM475 and RM2-22 on the long arm of chromosome 2. The genetic distance were 17.3 cM and 2.9 cM respectively.

Phase transitions, micro-morphology and its oxidation mechanism in oxidation of ilmenite (FeTiO_3) powder

Phase transitions, morphology changes, and oxidation mechanism of the ilmenite oxidation process were investigated. FeTi03 transforms to hematite and rutile when oxidation at 700-800 ℃, and pseudobrookite is formed when the oxidation temperature reaches 900 ℃. The initial ilmenite powder exhibits paramagnetism; however, after being oxidized at the intermediate temperature （800-850 ℃）, the oxidation product exhibits weak ferromagnetism. The oxidation mechanism was discussed. The microstructure observations show that a lot of micro-pores emerge on the surfaces of ilmenite particles at the intermediate temperature, which is deemed to be caoable ofenhancin~ the mass transfer ofoxgen during oxidation.

An accelerated method to evaluate thymopentin release from microspheres in vitro

To design an accelerated method to evaluate thymopentin release from PLGA microspheres in vitro. Microspheres were prepared by double emulsion technique, using poly（lactide-co-glycolide） （PLGA） as carrier. At higher medium temperature （45℃, 50℃ and 55℃）, an accelerated release testing in short time was studied and correlated with the conventional release （37℃） in vitro. The release in vitro of thymopentin from PLGA microspheres at 45 ℃, 50℃ and 55℃ was significantly accelerated （P 〈 0.05）. In particular, at 50℃, an accelerated release （30 h） of the hydrophilic peptide from the PLGA matrix was achieved and correlated well with the conventional release （30 d）. An accelerated release testing in vitro at higher temperature could be used to monitor thymopentin release from PLGA microspheres.

Genetic Transformation in Triticeae Crops

Wheat, triticale, tritordeum, barley, oat and rye are the most important crops in human consumptions and industry in the world. Transformation technology supplies a new source of improving Triticeae crops. In the past decade, transformation of wheat crops has considerably progressed. Many transgenic plants of Triticeae crops with various genes were produced via nricroprojectile bombardment, Agrobacterium-mediated transformation, PEG-uptake DNA technique, electroporation, microinjection, injection inflorescence and silicone carbide. Integration and expression of transgenes, inheritance and variation of transgenic plants have been studied. Technical improvements of genetic transformation for wheat crops will be extensively useful in commerce and benefit significantly to human being in the world.

关于小学如何使用“部编本”语文教材的几个问题

本文作者站在战略高度,以多维视角分析了中小学文科教材统一使用"部编本"的背景、"部编本"的特征以及"部编本"的新变化,并对一线教师如何提高对"部编本"的执行力谈了指导性意见。

Informational digital diagrams applied to predict spring wind,snow,and sandstorms

Using informational digital diagrams, we analyzed the snow event that occurred on Feb 26, 2006 and the sandstorm on Apr 11, 2006 in Xi＇an. Results indicate that, under similar weather circumstances, different events evidently exhibit unique vertical structure features. Informational digital diagrams provide a method for transitional weather prediction, a problem for present extrapolative analysis system.

Effects of Rotational Isomerism and Bond Length Alternation on Optical Spectra of FTC Chromophore in Solution

Rotational isomerism effects on the optical spectra of a push-pull nonlinear optical chro-mophore 2-dicyanomethylen-3-cyano-4-f2-[E-（4-N,N-di（2-acetoxyethyl）-amino）-phenylene-（3,4-dibutyl）-thien-5]-E-vinylg-5,5-dimethyl-2,5-dihydrofuran （FTC） in a few solvents have been studied using the time-dependent density functional theory in combination with the polarizable continuum model. It is shown that the maximum absorption peaks of the ro-tamers have difference of nearly 30 nm both in vacuum and in solutions. The population of the rotamers changes a lot in different solvents. Based on the geometries optimized by Hartree-Fock method, the Maxwell-Boltzmann averaged absorption has been calculated and the maximum absorption peak is in good agreement with experiment. It indicates that the bond length alternation can have an important effect on the optical spectra.

Microstructure evolution and dislocation configurations in nanostructured Al-Mg alloys processed by high pressure torsion

Microstructure evolution and dislocation configurations in nanostructured Al–Mg alloys processed by high pressure torsion （HPT） were analyzed by transmission electron microscopy （TEM） and high-resolution TEM （HRTEM）. The results show that the grains less than 100 nm have sharp grain boundaries （GBs） and are completely free of dislocations. In contrast, a high density of dislocation as high as 1017 m^-2 exists within the grains larger than 200 nm and these larger grains are usually separated into subgrains and dislocation cells. The dislocations are 60° full dislocations with Burgers vectors of 1/2〈110〉and most of them appear as dipoles and loops. The microtwins and stacking faults （SFs） formed by the Shockley partials from the dissociation of both the 60° mixed dislocation and 0° screw dislocation in ultrafine grains were simultaneously observed by HRTEM in the HPT Al–Mg alloys. These results suggest that partial dislocation emissions, as well as the activation of partial dislocations could also become a deformation mechanism in ultrafine-grained aluminum during severe plastic deformation. The grain refinement mechanism associated with the very high local dislocation density, the dislocation cells and the non-equilibrium GBs, as well as the SFs and microtwins in the HPT Al-Mg alloys were proposed.

Thermodynamic re-assessment of Fe-Ti binary system

The Fe-Ti binary system was re-assessed using the CALPHAD method in order to improve the capability of being extrapolated to a ternary or higher-order system. Compared with previous assessments, the main focus was put on the thermodynamic description of the two intermetallic compounds Fe2Ti and FeTi. The C14_Laves phase Fe2Ti was described by the two-sublattice model, which is widely used at present. By checking the homogeneity range on the boundary of the ternary systems involving the binary, the phase boundary of this compound was further confirmed. The FeTi phase with a BCC_B2 crystal structure was treated as the ordered phase of the BCC_A2 phase and a unified Gibbs energy function was used to describe both the ordered and disordered phases. Reproduction of the specific heat capacities of these compounds was another aspect paid particular attention to. Comprehensive comparisons of the calculated and experimental results regarding the phase diagram and thermodynamic properties show a good agreement between them and prove the validity of the present thermodynamic description.

Sol-gel Transition of Methylcellulose Solution in the Coexistence of Hexadecyltrimethylammonium Bromide and Sodium Chloride

The sol-gel transition of methylcellulose （MC） solution in the presence of NaCl and hexade- cyltrimethylammonium bromide （HTAB）, together with MC/NaCl solution in the presence of HTAB and MC/HATB solution in the presence of NaCl, was investigated by the rheological measurements. It has been found that the sol-gel transition temperature of MC solution decreases linearly with the concentration of NaCl in solution but increases linearly with the concentration of HTAB in solution, respectively. However, the sol-gel transition temperature of MC/NaCl solution in the presence of HTAB keeps the same value, independent of the concentration of HTAB in solution. On the other hand, the sol-gel transition temperature of MC/HTAB solution decreases linearly with the concentration of NaCl in solution. The experimental results suggest that, for MC/NaCl solution in the presence of HTAB, the salt- induced spherical micelles of HTAB should have formed in bulk solution. For MC solution in the absence of NaC1, no spherical micelles have been formed in bulk solution, though the concentration of HTAB in our experiment is almost one order of magnitude higher than the critical mieelle concentration of HTAB in polymer-free solution. In fact, due to adsorption of HTAB on MC chains, the realconcentration of HTAB in bulk solution, is much less than the apparent concentration of HTAB dissolved in MC solution.

Relationship among subtropical anticyclone,drought and earth rotation

The deep reason of severe disaster weather with the relationship among the earth nutation,rotation and atmospheric change is explored based on the effective results about the disaster weather prediction of the long term made by the variation of the earth rotation in near 10 years. It is discussed the relationship between the subtropical anticyclone and subtropical easterlies to aim at the problem of high temperature and drought in the globe,further more,the comparison analysis has been made to the earth nutation and the variation of rotation. The research results show that the reasons of severe disaster weather not only are due to atmosphere itself,but have some variation information of earth movement which could be used for the weather forecast.

Multi-objective optimization of stamping forming process of head using Pareto-based genetic algorithm

To obtain the optimal process parameters of stamping forming, finite element analysis and optimization technique were integrated via transforming multi-objective issue into a single-objective issue. A Pareto-based genetic algorithm was applied to optimizing the head stamping forming process. In the proposed optimal model, fracture, wrinkle and thickness varying are a function of several factors, such as fillet radius, draw-bead position, blank size and blank-holding force. Hence, it is necessary to investigate the relationship between the objective functions and the variables in order to make objective functions varying minimized simultaneously. Firstly, the central composite experimental(CCD) with four factors and five levels was applied, and the experimental data based on the central composite experimental were acquired. Then, the response surface model(RSM) was set up and the results of the analysis of variance(ANOVA) show that it is reliable to predict the fracture, wrinkle and thickness varying functions by the response surface model. Finally, a Pareto-based genetic algorithm was used to find out a set of Pareto front, which makes fracture, wrinkle and thickness varying minimized integrally. A head stamping case indicates that the present method has higher precision and practicability compared with the "trial and error" procedure.

Global Sea Level Change and Thermal Contribution

The global long-term sea level trend is obtained from the analysis of tide gauge data and TOPEX/Poseidon data. The linear trend of global mean sea level is highly non-uniform spatially, with an average rate of 2.2 mmyear^-1 in T/P sea-level rise from October 1992 to September 2002. Sea level change due to temperature variation （the thermosteric sea level） is discussed. The results are compared with TOPEX/Poseidon altimeter data in the same temporal span at different spatial scales. It is indicated that the thermal effect accounts for 86% and 73% of the observed seasonal variability in the northern and southern hemispheres, respectively. The TOPEX/Poseidon observed sea level lags behind the TSL by 2 months in the zonal band of 40%-60% in both the northern and southern hemispheres. Systematic differences of about 1-2 cm between TOPEX/Poseidon observations and thermosteric sea level data are obtained. The potential causes tbr these differences include water exchange among the atmosphere, land, and oceans, and some possible deviations in thermosteric contribution estimates and geophysical corrections to the TOPEX/Poseidon data.

High level of hepatitis B virus DNA after HBeAg-to-anti-HBe seroconversion is related to coexistence of mutations in its precore and basal core promoter

AIM: G1896A mutation in precore or A1762T/G1764Amutations in basal core promoter are suspected to be responsible for patients with detectable level of HBV DNA in serum after seroconversion from HBeAg to anti-Hbe. However, G1896A variant has impaired, while A1762T/ G1764A variant may have intact replication ability. They themselves or their coexistence status may play different roles in such meaningless seroconversion. For these reasons, the significances of these two types of mutations were comparatively investigated in this study. METHODS: One hundred and sixty-five sera with positive anti-Hbe and HBV DNA were collected from different patients. Mutations of G1896A and A1762T/G1764A among these serum samples were detected using competitively differentiated PCR. HBV DNA was demonstrated using real-time quantitative PCR. RESULTS: G1896A and/or A1762T/G1764A mutations were detected in 89.1% (147/165) out of patients with detectable HBV DNA in serum after HBeAg-to-anti-Hbe seroconversion. The positive rate of G1896A variants was significantly higher than that of A1762T/G1764A mutations (77.6% vs 50.3%, X2 = 26.61, P＜0.01). The coexistence positive rate of these two types of mutations was 38.8% (64/165). Coexistence mutations were found in 77.1% (64/83) out of sera with A1762T/G1764A mutations, and in 50.0% (64/128) out of sera with G1896A mutation. Compared with variants with G1896A mutation only, the coexistence mutations were predominant in patients with high level of serum HBV DNA, and related to higher total bilirubin, lower serum albumin and progressive liver diseases. CONCLUSION: The coexistence of G1896A mutation and A1762T/G1764A mutations is very common, and responsible for the major cases with high level of HBV DNA in serum and progressive liver diseases after HBeAg-to-anti-Hbe seroconversion. This coexistence mutation variant may have higher pathogenicity and replication ability.

Seasonal and intraseasonal variations of the surface Taiwan Warm Current

To study seasonal and intraseasonal variations of the Taiwan Warm Current (TWC) in detail,Rotated Empirical Orthogonal Function (REOF) and Extended Associate Pattern Analysis (EAPA) are jointly adopted with daily sea surface salinity (SSS), sea surface temperature (SST) and sea surface height (SSH)datasets covering 1126 days from American Navy Experimental Real-Time East Asian Seas Ocean Nowcast System in the present paper. Results show that the first and second REOFs of SST in the southern East China Sea(SECS) account for 50,8% and 39.8% of the total variance. The surface TWC contains persistent (multi-year mean), seasonal and intraseasonal components. The persistent one mainly inosculates with the Kuroshio but the seasonal and intraseasonal ones are usually active only on the continental shelf. Its persistent component is produced by inertial flow of the Kuroshio, however its seasonal and intraseasonal ones seems coming from seasonal and intraseasonal oscillations of monsoon force. The seasonal one reaches its maximum in late summer,lasting about four months and the intraseasonal one takes place at any seasons, lasting more than 40 days.

Siderite pyrolysis in suspension roasting:An in-situ study on kinetics,phase transformation,and product properties

Siderite,as an abundant iron ore,has not been effectively utilized,with a low utilization rate.In this study,the in-situ kinetics and mechanism of siderite during suspension magnetization roasting(SMR)were investigated to improve the selective conversion of siderite to magnetite and CO,enriching the theoretical system of green SMR using siderite as a reductant.According to the gas products analyses,the peak value of the reaction rate increased with increasing temperature,and its curves presented the feature of an early peak and long tail.The mechanism function of the siderite pyrolysis was the contraction sphere model(R_(3)):f(α)=3(1−α)2/3;E_(α)was 46.4653 kJ/mol;A was 0.5938 s^(−1);the kinetics equation was k=0.5938exp[−46.4653/(RT)].The in-situ HT-XRD results indicated that siderite was converted into magnetite and wüstite that exhibited a good crystallinity in SMR under a N_(2) atmosphere.At 620℃,the saturation magnetization(M_(s)),remanence magnetization(Mr),and coercivity(Hc)of the product peaked at 53.63×10^(-3)A·m^(2)/g,10.23×10^(-3)A·m^(2)/g,and 12.40×10^(3)A/m,respectively.Meanwhile,the initial particles with a smooth surface were transformed into particles with a porous and loose structure in the roasting process,which would contribute to reducing the grinding cost.