Erbium-doped BaTiO3 films on LaNiO3/Si substrates were fabricated by sol-gel method. The crystalline structure, morphologies and upconversion （UC） luminescence properties of films were respectively investigated by X...Erbium-doped BaTiO3 films on LaNiO3/Si substrates were fabricated by sol-gel method. The crystalline structure, morphologies and upconversion （UC） luminescence properties of films were respectively investigated by X-ray diffraction （XRD）, atomic force microcopy （AFM） and photoluminescence （PL）. The results indicate that both of the microstructure and luminescence are found to be dependent on Er^3＋ substituting sites. The samples with A-site substitution have smaller lattice constants, larger grains and smoother surface than those with B-site substitution. The photoluminescence spectra show that both of the samples have two stronger green emission bands centered at 528 and 548 nm and a weak red emission band centered at 673 nm, which correspond to the relaxation of Er^3＋ from ^2H11/2, ^4S3/2, and ^4F9/2 levels to the ground level ^4I15/2, respectively. Compared with B-site doped films, A-site doped films have a stronger integrated intensity of green emissions and a weaker relative intensity of red emissions. The differences could be explained by the crystalline quality and cross relaxation （CR） process.展开更多
Self-made TiO2 nanoparticles were used as photoelectrode material of dye sensitized solar cell. The TiO2 thin film coats through spreading nanoparticles evenly onto the ITO glass via self-made spin-heat platform, and ...Self-made TiO2 nanoparticles were used as photoelectrode material of dye sensitized solar cell. The TiO2 thin film coats through spreading nanoparticles evenly onto the ITO glass via self-made spin-heat platform, and then TiO2 thin film is soaked in the dye N-719 more than 12 h to prepare the photoelectrode device. The TiO2 nanoparticles produced by electric-discharge-nanofluid-process have premium anatase crystal property, and its diameter can be controlled within a range of 20-50 nm. The surface energy zeta potential of nanofluid is from -22 mV to -28.8 mV, it is a stable particle suspension in the deionized water. A trace of surfactant Triton X-100 put upon the surface of ITO glass can produce a uniform and dense TiO2 thin film and heating up the spin platform to 200 oC is able to eliminate mixed surfac-tant. Self-made TiO2 film presents excellent dye absorption performance and even doesn＇t need heat treatment procedure to enhance essential property. Results of energy analysis show the thicker film structure will increase the short-circuit current density that causes higher conversion efficiency. But, as the film structure is large and thick, both the open-circuit voltage and fill factor will decline gradually to lead bad efficiency of dye-sensitized solar cell.展开更多
Due to their particular optical characteristics,metallic island films have the potential to significantly increase the energy conversion efficiency of solar cell.We experimentally and theoretically investigated the ef...Due to their particular optical characteristics,metallic island films have the potential to significantly increase the energy conversion efficiency of solar cell.We experimentally and theoretically investigated the effect of substrate temperature on the morphologies and optical properties of the silver island films.At low temperature,below 300 ℃,as the substrate temperature increases.Compared to the films prepared at room temperature,the sizes of nanoparticles decrease and the Absorption peaks shift to shorter wavelength accompanied by an increase density resulting in a 150% Absorption efficiency.As the substrate temperature goes up to 300 ℃,nanoparticles with larger in-plan(X-Y)dimensions are formed,the number density decreases and the Absorption peaks redshift but the Absorption efficiency is still 10% higher.Numerical simulation reveals that these behaviors are a consequence of morphologies transformation.展开更多
基金Project (2009AA035002) supported by the High-tech Research and Development Program of China
文摘Erbium-doped BaTiO3 films on LaNiO3/Si substrates were fabricated by sol-gel method. The crystalline structure, morphologies and upconversion （UC） luminescence properties of films were respectively investigated by X-ray diffraction （XRD）, atomic force microcopy （AFM） and photoluminescence （PL）. The results indicate that both of the microstructure and luminescence are found to be dependent on Er^3＋ substituting sites. The samples with A-site substitution have smaller lattice constants, larger grains and smoother surface than those with B-site substitution. The photoluminescence spectra show that both of the samples have two stronger green emission bands centered at 528 and 548 nm and a weak red emission band centered at 673 nm, which correspond to the relaxation of Er^3＋ from ^2H11/2, ^4S3/2, and ^4F9/2 levels to the ground level ^4I15/2, respectively. Compared with B-site doped films, A-site doped films have a stronger integrated intensity of green emissions and a weaker relative intensity of red emissions. The differences could be explained by the crystalline quality and cross relaxation （CR） process.
文摘Self-made TiO2 nanoparticles were used as photoelectrode material of dye sensitized solar cell. The TiO2 thin film coats through spreading nanoparticles evenly onto the ITO glass via self-made spin-heat platform, and then TiO2 thin film is soaked in the dye N-719 more than 12 h to prepare the photoelectrode device. The TiO2 nanoparticles produced by electric-discharge-nanofluid-process have premium anatase crystal property, and its diameter can be controlled within a range of 20-50 nm. The surface energy zeta potential of nanofluid is from -22 mV to -28.8 mV, it is a stable particle suspension in the deionized water. A trace of surfactant Triton X-100 put upon the surface of ITO glass can produce a uniform and dense TiO2 thin film and heating up the spin platform to 200 oC is able to eliminate mixed surfac-tant. Self-made TiO2 film presents excellent dye absorption performance and even doesn＇t need heat treatment procedure to enhance essential property. Results of energy analysis show the thicker film structure will increase the short-circuit current density that causes higher conversion efficiency. But, as the film structure is large and thick, both the open-circuit voltage and fill factor will decline gradually to lead bad efficiency of dye-sensitized solar cell.
基金The Distinguished Youth Foundation of Hunan Province(03JJY1008)The Natural Science Foundation of Hunan Province(06JJ2034)
文摘Due to their particular optical characteristics,metallic island films have the potential to significantly increase the energy conversion efficiency of solar cell.We experimentally and theoretically investigated the effect of substrate temperature on the morphologies and optical properties of the silver island films.At low temperature,below 300 ℃,as the substrate temperature increases.Compared to the films prepared at room temperature,the sizes of nanoparticles decrease and the Absorption peaks shift to shorter wavelength accompanied by an increase density resulting in a 150% Absorption efficiency.As the substrate temperature goes up to 300 ℃,nanoparticles with larger in-plan(X-Y)dimensions are formed,the number density decreases and the Absorption peaks redshift but the Absorption efficiency is still 10% higher.Numerical simulation reveals that these behaviors are a consequence of morphologies transformation.
