四川甲基卡锂矿伟晶岩转石分布区“3定2参”大比例尺填图法及其在青藏高原应用的意义

我国西部地区无论是新疆阿尔泰还是地处青藏高原的西昆仑地区或是松潘-甘孜成矿带,都是我国伟晶岩型矿床找矿远景区,但要么剥蚀严重,要么第四系覆盖,难以找到好的地质露头。本文以地处青藏高原东南缘的川西甲基卡矿田为例,通过近10年来的实践,探索出一套在第四系覆盖严重但又有伟晶岩转石分布地区的填图找矿方法--"3定2参"1∶2000伟晶岩转石填图法,即:定伟晶岩转石类型、尺度、密度,参考矿区内伟晶岩脉产状和地形条件。实践证明,该方法能够快速有效识别伟晶岩转石类型(冰碛物、坡积物和原地或半原地型),并可进一步确定第四系覆盖区内伟晶岩脉的类型、产状及规模,为钻探工程部署提供依据。2019年在甲基卡经8个钻孔验证,在日西柯第四系覆盖区内发现16条花岗伟晶岩脉,其中锂辉石伟晶岩脉10条,实现了新的找矿突破。这一方法同样在可尔因矿集区适用,并指导2019年"松潘-甘孜成锂带锂铍多金属大型资源基地综合调查评价"项目在上述两个地区实施钻探验证,初步探获新增氧化锂资源量超过15万吨,值得进一步推广应用。

地质探矿中点槽控制矿化转石-短槽揭露化探异常方法研究

槽探工程用来揭露地表矿化,通过结果布置钻孔,槽探位置的布置至关重要。目前对于槽探的布置,更多的只是单纯的切割化探异常,对于银金等出露地表窄的矿体,很难达到揭露矿体解释化探异常得目的。而且近年来随着林业环境保护意识的提高,槽探工程受到的很多限制。通过近年来的工作实践,总结了一套灵活运用点槽找矿方法,无论是工作量还是工作效率都能起到事半功倍的效果。首先要通过化探异常分析成矿背景,再通过点槽将化探异常标志转化为矿化转石找矿标志,最后根据矿化转石的分布及微地形的体现,通过短槽揭露化探异常。

Corrosion resistance of in-situ Mg-Al hydrotalcite conversion film on AZ31 magnesium alloy by one-step formation

In situ growth of nano-sized layered double hydroxides （LDH） conversion film on AZ31 alloy was synthesized by a urea hydrolysis method. The formation mechanism of the film was proposed. Firstly, the dissolved Mg2＋ ions deposited into a precursor film consisted of MgCO3 and Mgs（CO3）4（OH）2·4H2O; secondly, the precursor translated into the crystalline Mg（OH）2 in alkaline conditions; finally, the Mg2＋ ions in Mg（OH）z were replaced by A13＋ ions, Mg（OH）2 translated into the more stable LDH structure, simultaneously, the OH- ions in the interlayer were exchanged by CO32-, thus led to the formation of the LDH （Mg6Alz（OHh6CO3·4H2O） film. The results indicated that the LDH film characterized by interlocking plate-like nanostructures and ion-exchange ability significantly improved the corrosion resistance of the AZ31 Mg alloy.

Properties of dawsonite conversion film on AZ31 magnesium alloy

An environmentally friendly method for synthesizing a dawsonite conversion film was developed to improve the corrosion resistance of AZ31 Mg alloy. The film was prepared by two steps： the AZ31 alloy was first immersed in an Al 2 （SO 4 ） 3 solution venting CO 2 gas to form a precursor film, and then the precursor film was treated in a Na 2 CO 3 solution dissolved with Al to obtain the dawsonite film. The surface morphology of the conversion film was observed with an environmental scanning electronic microscope. The chemical composition of the conversion film was analyzed by energy dispersive X-ray spectroscopy and X-ray diffractometry. Electrochemical and immersion tests were carried out to evaluate the protection effect of the conversion film on AZ31 alloy. There are some network-like cracks on the surface of the film. The conversion film is mainly composed of dawsonite NaAlCO 3 （OH） 2 , Al（OH） 3 and Al 5 （OH） 13 （CO 3 ）·5H 2 O, which can increase the corrosion potential and reduce the corrosion current density of the Mg substrate. After immersion tests, the film almost keeps intact, except for the localized narrow areas with several corrosion pits, while the bare material undergoes serious general corrosion. It is indicated that the dawsonite film can provide good protection to the magnesium alloy.

Phase evolution of 17(Cu-10Ni)-(NiFe_2O_4-10NiO) cermet inert anode during aluminum electrolysis

17（Cu-10Ni）-（NiFe2O4-10NiO） cermets were prepared by cold pressing and sintering in nitrogen atmosphere, and tested as inert anode for aluminum electrolysis at 960 °C for 10 and 40 h, respectively. Microstructures and phase compositions of the as-sintered and post-electrolyzed samples were investigated. The impurity contents in the electrolyte and the cathode metal were detected in order to investigate the corrosion characteristic of the elements of Fe, Ni and Cu in the anode. A dense NiFe2O4 layer was observed on the surface of anode and thickened with prolonging the electrolysis time. In the newly formed dense ceramic layer, NiO phase disappeared as a result of being swallowed by NiFe2O4 phase, and the metal phase was oxidized during the electrolysis in which Cu element showed a higher dissolution rate than Fe and Ni elements. The formation process of the dense ceramic layer during the electrolysis was presented and explained by using the corrosion mode of the metal phase and the transformation mechanism from NiO phase to NiFe2O4 phase.

Electric field assisted chemical conversion process of AZ91D magnesium alloy in HCO_3^-/CO_3^(2-) solution

A new method for synthesizing Mg-Al hydrotalcite conversion coating on AZ91D Mg alloy was developed by the application of electric field （EF）. By using EF technique, the formation time of the coating can be significantly reduced. The SEM results indicate that a continuous and compact Mg-Al hydrotalcite coating is formed on the surface of Mg alloy after short time EF treatment. However, a long time treatment would make the coating partially exfoliate. The corrosion current density （Jcor ） of the coated sample （EF1＋1 h） is approximately two orders of magnitude lower than that of Mg alloy substrate. The test of electrochemical impedance spectroscopy （EIS） and immersion corrosion also suggest that the coating can effectively protect Mg alloy against corrosion.

《游黄山记》的写作特点

徐宏祖的《徐霞客游记》,自问世以来颇受人们的重视和称赞,在游记散文中是独具一格,别树一帜的,当代著名散文作家方纪,在《桂林山水》一文中称赞《徐霞客游记》“很少概括和比拟,但却忠实而详尽。读起来你不免要为他的游兴所动,为他的辛勤所感。

自家血治疗奶牛顽固性腹泻

奶牛腹泻,我们曾采用过静脉注射四环素、卡那霉素、口服高锰酸钾溶液及中兽医等疗法,虽取得了一定的效果,但对轻症的尚可,对顽固腹泻的效果不很理想。从1986年起,我们对严重腹泻的病牛采用自家血疗法,取得了满意效果,现介绍如下。

谈“断”与“续”

叙事类的散文,记人记事,作者每每将人物的经历和事件的经过,时断时续的描述着,这种叙述的断续法,是使文章跌宕多姿、形象鲜明、中心突出的技法之一。语文教师熟悉它,对指导阅读和习作是大有裨益的。

阿凡提上任

阿凡提最近被调到S县卫生局当秘书,上任第一天就碰到一件头疼的事。卫生局的胖局长叫秘书股的瘦股长转发一份文件,瘦股长把这件差事交给了他。阿凡提一看,题目是B地区卫生局关于转发C省卫生厅关于转发《卫生部关于灭鼠问题的通知》的通知的通知。尽管阿凡提聪明绝顶,头脑灵活,但这次却『卡壳』了。他搜肠刮肚,绞尽脑汁,直到下班也无从下笔。

关于综合找矿的几点体会

综合找矿的关键是要有以地质——找矿为中心的指导思想,牢牢地树立两个观念。第一是找矿的观念,要有浓厚的找矿意识,不放过任何可能的信息和机会,没有这一观念,矿在眼前也可能被放过;有了这个观念,对于所有信息都会分析是否与矿有关,一块转石、一处露头、一个异常、一组数据都能引起你的注意,追根究底取得突破;

Transformation of Applied Phosphorus in a Calcareous Fluvisol

A new inorganic phosphorus (IP) fractionation scheme developed by Jiang and Gu was used in an incubation experiment to investigate the transformation of applied P in a calcareous fluvisol. The results show that after addition of common superphosphate (CSP), the Ca2-P in the soil decreased gradually and transformed largely to the less available Fe-P, Al-P and Ca8-P, rather than to the unavailable forms of Ca10-P and O-P. The different IP fractions ranked in the following order with respect to the increment by addition of CSP after 120 days of incubation: Fe-P> Al-P>Ca8-P>Ca2-P. After addition of pig manure, the content of Ca2-P in the soil increased rapidly at first and then decreased slowly, and the amount of different IP fractions accumulated after 120 days of incubation ranked in the following order: Ca2-P > Fe-P > Ca8-P > Al-P. Evidently, the variation in content of Ca2-P and the order of increase in different IP fractions in incubation induced by application of pig manure were quite different from that of CSP. The increase in IP fractions in the incubation of broad bean green manure (BBGM)for 120 days was in the rank of Fe-P > Ca2-P > Ca8-P > Al-P; but because organic phosphorus (OP) of BBGM degraded relatively slowly, the increment in IP fractions was lower than that of pig manure. Wheat straw was difficult to mineralize and induced a strong biological fixation of soil P, resulting in a decrease of the content of Ca2-P, even Ca8-P, Fe-P and Al-P.

Testing study of subcritical crack growth velocity and fracture toughness of marble

Subcritical crack growth of double torsion specimens made of marble was studied using Instron1342 type electro hydraulic servo test machine. The relations of the mode-I stress intensity factor KI versus the subcritical crack growth velocity V and the fracture toughness KIC were obtained by the double torsion constant displacement load relaxation method. The behavior of subcritical crack growth was analyzed. The results show that lgKI-lgV relations of marble measured by this method accord with linear rule, i.e. the relations between subcritical crack growth velocity V and stress intensity factor KI have a power law, which is in good agreement with Charles theory. The testing results provide a basis for time-dependency of rock engineering stability.

Analysis of Measures and Effect on Reducing Olefin Content in Gasoline

This article refers to major measures for reducing olefin content of automotive gasoline and the effect after adoption of these measures. The key for reducing olefin content in China's automotive gasoline pool is to reduce the olefin content of FCC naphtha. The domestic refiners apply the olefinreducing catalyst to decrease the olefin content of FCC gasoline as a convenient and cheap means to meet the national standard for automotive gasoline at the present phase. Furthermore, the novel domestic FCC reaction processes, such as the MIP, MGD, FDFCC and other processes can also apparently reduce olefin content in FCC gasoline. In order to further reduce the olefin content in gasoline to meet more stringent standard for automotive gasoline, Chinese refiners should optimize the processing scheme while aggressively disseminating hydrogenation process along with development of catalytic reforming,alkylation, etherification and other processes to completely change the simplistic composition of domestic gasoline pool.

The FCC Flue Gas SOx Transfer Additive RFS Developed by RIPP

The present paper introduces the development of FCC flue gas SOx transfer additives by RIPP with a brief discussion of SOx transfer mechanism. The second-generation SO transfer additives of the RFS series are RIPP＇s proprietary additives with significantly improved performances. The results of commercial tests indicate that the RFS additive can effectively control SO emission of the FCC regenerator while maintaining product yields and product quality when the additive is used in a proper concentra- tion range.

Effects of Iron and Aluminum Oxides and Kaolinite on Adsorption and Activities of Invertase *1

Experiments were conducted to study the influences of synthetic bayerite, non crystalline aluminum oxide (N AlOH), goethite, non crystalline iron oxide (N FeOH) and kaolinite on the adsorption, activity, kinetics and thermal stability of invertase. Adsorption of invertase on iron, aluminum oxides fitted Langmuir equation. The amount of invertase held on the minerals followed the sequence kaolinite > goethite > N AlOH > bayerite > N FeOH. No correlation was found between enzyme adsorption and the specific surface area of minerals examined. The differences in the surface structure of minerals and the arrangement of enzymatic molecules on mineral surfaces led to the different capacities of minerals for enzyme adsorption. The adsorption of invertase on bayerite, N AlOH, goethite, N FeOH and kaolinite was differently affected by pH. The order for the activity of invertase adsorbed on minerals was N FeOH > N AlOH > bayerite > reak goethite > kaolinite. The inhibition effect of minerals on enzyme activity was kaolinite > crystalline oxides > non crystalline oxides. The pH optimum of iron oxide and aluminum oxide invertase complexes was similar to that of free enzyme (pH 4.0), whereas the pH optimum of kaolinite inv ertase complex was one pH unit higher than that of free enzyme. The affinity to substrate and the maximum reaction velocity as well as the thermal stability of combined invertase were lower than those of the free enzyme.

Development and Application of the CGP-2 Catalyst in the MIP-CGP Process

The research and development of the CGP-2 catalyst, which was used in the MIP-CGP process for reducing the olefin and sulfur contents of FCC naphtha and enhancing the propylene yield, were introduced. A specific type of metal compound was added into the matrix to provide active centers for reactions including catalytic conversion and selective adsorption of sulfur containing compounds. The CGP-2 catalyst possessed excellent hydrothermal stability to meet the requirements of the 2rid reaction zone of the MIP-CGP process. The commercial test of the said catalyst at the SINOPEC Cangzhou refinery showed that in comparison with the base case （using the CGP-1Z catalyst） the CGP-2 catalyst could reduce the sulfur content of FCC naphtha by 30.32% and increase the propylene yield along with good coke selectivity. Thus, the naphtha produced by the MIP-CGP process at the Cangzhou refinery can meet the new gasoline standard enforced in July 2005.

Transalkylation of Multi-secbutylbenzenes with Benzene over Hierarchical Beta Zeolite

A hierarchical beta zeolite synthesized by quasi-solid phase conversion method was characterized by BET, scanning electron microscope （SEM）, transmission electron microscope （TEM）, X-ray diffraction （XRD）, temperature-programmed desorption of ammonia （NH3-TPD）, 27A1 and 295i magic angle spinning nuclear magnetic resonance （27A1 and 29Si MAS NMR）, and its catalytic performance was compared with that of conventional microporous beta zeolite for liquid phase transalkylation of multi-secbutylbenzenes （MSBBs） with benzene. The results indicate that the hierarchical beta zeolite consists of nanosized crystals with a meso/ microporous structure and has stronger acid strength than the microporous beta zeolite. The higher conversion oftri-secbutylbenzene （TSBB） and selectivity ofsec-butylbenzene （SBB） are achieved on hierarchical beta zeolite than microporous beta zeolite, while the conversion of di-secbutylbenzene （DSBB） is slightly higher. The improvement of catalytic performance over hierarchical beta zeolite can be ascribed to the presence of mesopores, nanosized crystals and stronger acidity.

Hierarchically Structured Monolithic ZSM-5 through Macroporous Silica Gel Zeolitization

The hierarchically structured ZSM-5 monolith was prepared through transforming the skeletons of the macroporous silica gel into ZSM-5 by the steam-assisted conversion method. The morphology and monolithic shapes of macroporous silica gel were well preserved. The hierarchically structured ZSM-5 monolith exhibited the hierarchical porosity, with mesopores and macropores existing inside the macroporous silica gel, and micropores formed by the ZSM-5. The products have been characterized properly by using the XRD, SEM and N2 adsorption–desorption methods.