The study of damage in rotating machineries is of fundamental interest in the fields of machine and structure design. A rotating system, supported by bearings and under some dynamic conditions, can generate a variety ...The study of damage in rotating machineries is of fundamental interest in the fields of machine and structure design. A rotating system, supported by bearings and under some dynamic conditions, can generate a variety of problems that are encountered in many different types of rotating machines. One of these problems is the unbalance due to non-homogeneous mass distribution along the shaft. One of the techniques which are widespread today is the identification of parameters and excitation forces that may well followed by monitoring the evolution and change of possible variations of these parameters. Although several methods for the identification of unbalance excitation force are available in the literature, none of them can be considered unrestricted to be applied for all rotating systems. In this study, two methodologies to identify unknown excitations, such as unbalance, have been proposed. This project refers to the analysis of unbalanced forces from displacement parameters and speed by using methods of identification by Fourier series and Legendre polynomials together with the finite element method, state observers in reasons of the problem of absence of signs of rotational displacement, bandpass filter were used to noise suppression of the data collected from the experimental part, Quasi-Newton method to minimize a function in which the bearing stiffness and its damping are unknowns, and also the experimental verification of the methodology, using for this system owned by a rotary mechanical vibrations of the Department of Mechanical Engineering of Faculty of Engineering, campus of llha Solteira.展开更多
As the nano-motor becomes a mechanical reality, its prototype can be envisaged as nano-sized rotating machinery at a situation,albeit for different purposes, like that in the first half of the 20th century during whic...As the nano-motor becomes a mechanical reality, its prototype can be envisaged as nano-sized rotating machinery at a situation,albeit for different purposes, like that in the first half of the 20th century during which rotor dynamics has contributed toboosting machine power capacity. Accordingly, we take the benefit of hindsight to develop a classical framework of vibrationanalysis. Essentially, the equations of motion are formulated to cope with both the special carbon-nanotube properties and thefirst author’s previously developed spinning beam formalism, establishing a model satisfactorily verified by some availablemolecular dynamics (MD) data and classical spinning beam results extracted from the literature. The model is inexpensivebased on continuum mechanics as an alternative to the less-flexible MD method for simulating wave motion of the spinningsingle-walled carbon nanotube, yielding several interesting phenomena, including the fall-off and splitting of the wave charac-teristic curves and the unexpected gyroscopic phase property. Potential applications are proposed.展开更多
The ATP synthase （having a typical subunit composition of α3β3γeab2c8-15） employs an intriguing rotary mechanism for the generation of ATP from ADP and Pi, using energy stored in a transmembrane proton gradient. ...The ATP synthase （having a typical subunit composition of α3β3γeab2c8-15） employs an intriguing rotary mechanism for the generation of ATP from ADP and Pi, using energy stored in a transmembrane proton gradient. The conventional rotary model, although being generally accepted, remains difficult to explain certain experimental observations. Here we propose an alterna- tive rotary model for the ATP synthase such that what rotates is the catalytic α3β3 cylinder rather than the central stalk and the membrane-embedded c-ring. Specifically, the membrane translocation of protons would induce a cycled conformational change in the c-ring, leading to a reciprocating motion of the attached central stalk, which in turn drives the unidirectional rotation of the α3β3 cylinder. Such a reciprocating motion-driven rotation mechanism is somehow analogous to the working mechanism of a retractable click ballpoint pen. Our new model not only explains the experimental observations that have been difficult to reconcile with the conventional model but also avoids its theoretical illogicality.展开更多
文摘The study of damage in rotating machineries is of fundamental interest in the fields of machine and structure design. A rotating system, supported by bearings and under some dynamic conditions, can generate a variety of problems that are encountered in many different types of rotating machines. One of these problems is the unbalance due to non-homogeneous mass distribution along the shaft. One of the techniques which are widespread today is the identification of parameters and excitation forces that may well followed by monitoring the evolution and change of possible variations of these parameters. Although several methods for the identification of unbalance excitation force are available in the literature, none of them can be considered unrestricted to be applied for all rotating systems. In this study, two methodologies to identify unknown excitations, such as unbalance, have been proposed. This project refers to the analysis of unbalanced forces from displacement parameters and speed by using methods of identification by Fourier series and Legendre polynomials together with the finite element method, state observers in reasons of the problem of absence of signs of rotational displacement, bandpass filter were used to noise suppression of the data collected from the experimental part, Quasi-Newton method to minimize a function in which the bearing stiffness and its damping are unknowns, and also the experimental verification of the methodology, using for this system owned by a rotary mechanical vibrations of the Department of Mechanical Engineering of Faculty of Engineering, campus of llha Solteira.
基金supported by the National Natural Science Foundation of China (Grant Nos.60936001, 11021262 and 11011120245)the National Basic Research Program of China (Grant No. 2007CB310500)
文摘As the nano-motor becomes a mechanical reality, its prototype can be envisaged as nano-sized rotating machinery at a situation,albeit for different purposes, like that in the first half of the 20th century during which rotor dynamics has contributed toboosting machine power capacity. Accordingly, we take the benefit of hindsight to develop a classical framework of vibrationanalysis. Essentially, the equations of motion are formulated to cope with both the special carbon-nanotube properties and thefirst author’s previously developed spinning beam formalism, establishing a model satisfactorily verified by some availablemolecular dynamics (MD) data and classical spinning beam results extracted from the literature. The model is inexpensivebased on continuum mechanics as an alternative to the less-flexible MD method for simulating wave motion of the spinningsingle-walled carbon nanotube, yielding several interesting phenomena, including the fall-off and splitting of the wave charac-teristic curves and the unexpected gyroscopic phase property. Potential applications are proposed.
基金supported by research grants from the National Basic Research Program of China(2012CB917300 to Zengyi Chang and Xinmiao Fu)the National Natural Science Foundation of China(31470766 and 31170738 to ZYC31270804 and 31570778 to Xinmiao Fu)
文摘The ATP synthase （having a typical subunit composition of α3β3γeab2c8-15） employs an intriguing rotary mechanism for the generation of ATP from ADP and Pi, using energy stored in a transmembrane proton gradient. The conventional rotary model, although being generally accepted, remains difficult to explain certain experimental observations. Here we propose an alterna- tive rotary model for the ATP synthase such that what rotates is the catalytic α3β3 cylinder rather than the central stalk and the membrane-embedded c-ring. Specifically, the membrane translocation of protons would induce a cycled conformational change in the c-ring, leading to a reciprocating motion of the attached central stalk, which in turn drives the unidirectional rotation of the α3β3 cylinder. Such a reciprocating motion-driven rotation mechanism is somehow analogous to the working mechanism of a retractable click ballpoint pen. Our new model not only explains the experimental observations that have been difficult to reconcile with the conventional model but also avoids its theoretical illogicality.
