期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
六圆柱-圆锥轮式月球车的设计 被引量:12
1
作者 陶建国 邓宗全 +1 位作者 高海波 胡明 《哈尔滨工业大学学报》 EI CAS CSCD 北大核心 2006年第1期4-7,共4页
针对月球表面的非结构化环境,设计了一种新型六圆柱-圆锥轮式月球车.整车由三节串联而成,每节具有一对独立驱动的圆柱-圆锥轮,由两个三自由度的悬架结构连接,三节之间能够被动实现俯仰和扭转相对运动;悬架关节中设计有离合器或制动器,... 针对月球表面的非结构化环境,设计了一种新型六圆柱-圆锥轮式月球车.整车由三节串联而成,每节具有一对独立驱动的圆柱-圆锥轮,由两个三自由度的悬架结构连接,三节之间能够被动实现俯仰和扭转相对运动;悬架关节中设计有离合器或制动器,能够根据需要锁住关节或在电机驱动下实现主动俯仰或前摆运动,从而能够使月球车根据路况以轮式或轮步方式移动.为了降低刚性车轮产生的振动,在车轮和支承轴之间设计了由金属橡胶构成的减振器.对月球车的结构参数优化和移动性能的分析,结果表明,该车具有很强的地形适应能力和越障能力. 展开更多
关键词 月球车 六圆柱-圆锥 轮步移动 优化设计
下载PDF
轮-步复合式火星车移动系统设计及分析 被引量:5
2
作者 高海波 郑军强 +3 位作者 刘振 王亚彬 于海涛 邓宗全 《机械工程学报》 EI CAS CSCD 北大核心 2019年第1期1-16,共16页
为了解决轮式火星探测车在松软地面上的通过性受到轮-地作用机制限制的问题,提出一种具备轮-步复合移动能力的四轮火星探测车构型。基于地面力学数值计算方法对制动轮附着力和驱动轮牵引力进行了比较,明确了该车的地面力学机理。提出一... 为了解决轮式火星探测车在松软地面上的通过性受到轮-地作用机制限制的问题,提出一种具备轮-步复合移动能力的四轮火星探测车构型。基于地面力学数值计算方法对制动轮附着力和驱动轮牵引力进行了比较,明确了该车的地面力学机理。提出一种双摆杆式步行机构,确定了移动系统结构。利用带传动关联双摆杆步行机构的两个回转运动,使其比独立驱动具有更好的负载特性和功率特性。使用行星轮系和制动器实现轮行、步行、轮-步复合、制动四种运行状态,依托行星轮系实现轮-步匹配,使得轮-步复合移动的控制大幅简化。针对坡面行驶工况和坡面步行工况进行负载分析,给出了步行传动和车轮驱动传动的传动比计算方法和减速器布置,完成了轮-步复合移动机构设计和制造。分析了典型步态,并通过仿真方法对各步态下关节负载变化规律进行了分析。研究旨在拓展火星车研究理论和方法,为我国火星探测任务提供移动系统研制建议。 展开更多
关键词 机械设计原理与方法 火星车移动系统 -复合移动方式 高通过性悬架
原文传递
Precise navigation for a 4WS mobile robot
3
作者 何波 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2006年第2期185-193,共9页
Position and orientation estimation with high accuracy based on GPS and encoders for a four-wheel-steering vehicle (4WS) mobile robot is presented. A GPS receiver working in Real-Time Kinematics (RTK) mode can offer c... Position and orientation estimation with high accuracy based on GPS and encoders for a four-wheel-steering vehicle (4WS) mobile robot is presented. A GPS receiver working in Real-Time Kinematics (RTK) mode can offer centimeter-level accuracy for our vehicle. In addition to GPS, the vehicle is equipped with four incremental encoders and two absolute encoders to provide information on wheels for estimation of velocity and sideslip angle of vehicle. The proposed architecture of position and orientation estimation consists of two extended Kalman filters and a processing unit of Runga-Kutta based dead reckoning. The first EKF fuses data from six encoders to estimate the vehicle velocity and the sideslip angle. The second EKF is applied to the estimation of position and orientation based on the measurement from precise RTK GPS data and output from first EKF. To obtain higher accuracy of estimation, an arbitrator is designed to switch between EKF2 and dead reckoning. The results and analysis of experiments are presented to show the effectiveness of the proposed approach. Limitations of the proposed approach and future works are also pointed out and discussed in this paper. 展开更多
关键词 Extended Kalman filter NAVIGATION Dead reckoning GPS
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部