In order to conform to dimensional tolerances, an efficient numerical method, displacement iterative compensation method, based on finite element methodology (FEM) was presented for the wax pattern die profile desig...In order to conform to dimensional tolerances, an efficient numerical method, displacement iterative compensation method, based on finite element methodology (FEM) was presented for the wax pattern die profile design of turbine blades. Casting shrinkages at different positions of the blade which was considered nonlinear thermo-mechanical casting deformations were calculated. Based on the displacement iterative compensation method proposed, the optimized wax pattern die profile can be established. For a A356 alloy blade, substantial reduction in dimensional and shape tolerances was achieved with the developed die shape optimization system. Numerical simulation result obtained by the proposed method shows a good agreement with the result measured experimentally. After four times iterations, compared with the CAD model of turbine blade, the total form error decreases to 0.001 978 mm from the orevious 0.515 815 mm.展开更多
报道了单性木兰(Kmeria septentrionalis Dandy)花的形态发生过程。发现过去一直被认为是雌花条状披针形的"内轮花被片",实际为退化雄蕊,它形态发生的时间与位置均与雄花的雄蕊相同,在成熟结构中仍可见药室残迹,说明单性木兰...报道了单性木兰(Kmeria septentrionalis Dandy)花的形态发生过程。发现过去一直被认为是雌花条状披针形的"内轮花被片",实际为退化雄蕊,它形态发生的时间与位置均与雄花的雄蕊相同,在成熟结构中仍可见药室残迹,说明单性木兰的雌性花是由两性花退化而来。通过与K.duperreana(Pierre)Dandy和Magnolia thailandica Noot.& Chalermglin雌花的比较,发现它们雌花的形态相同,从而得知人们长期以来对此3种植物雌花的认识有误,原一直认为的"内轮花被片"实为退化雄蕊。展开更多
An approach to contour extraction and feature point detection in the 3-D fragment reassembly is proposed. A simple and effective technique is used for building the intrinsic topology of the fragment data suitable for ...An approach to contour extraction and feature point detection in the 3-D fragment reassembly is proposed. A simple and effective technique is used for building the intrinsic topology of the fragment data suitable for contour extraction. For the scanned data in which the topology is difficult to be achieved, the corresponding solutions are given to manage this problem. A robust approach is used for the curvature and torsion calculation of the discrete contour in a 3-D space. Finally, a method is developed for detecting feature points of the fragment contour based on total curvature. Therefore, the contour description combines the simple global information with local feature points. Experiments with real contour curves extracted from 3-D fragments demonstrate that the proposed method is robust and efficient.展开更多
Nanogrinding of SiC wafers with high flatness and low subsurface damage was proposed and nanogrinding experiments were carried out on an ultra precision grinding machine with fine diamond wheels. Experimental results ...Nanogrinding of SiC wafers with high flatness and low subsurface damage was proposed and nanogrinding experiments were carried out on an ultra precision grinding machine with fine diamond wheels. Experimental results show that nanogrinding can produce flatness less than 1.0μm and a surface roughness Ra of 0.42nm. It is found that nanogrinding is capable of producing much flatter SiC wafers with a lower damage than double side lapping and mechanical polishing in much less time and it can replace double side lapping and mechanical polishing and reduce the removal amount of chemical mechanical polishing.展开更多
Straight Darrieus wind turbine has attractive characteristics such as the ability to accept wind from random direction and easy installation and maintenance. But its aerodynamic performance is very complicated,especia...Straight Darrieus wind turbine has attractive characteristics such as the ability to accept wind from random direction and easy installation and maintenance. But its aerodynamic performance is very complicated,especially for the existence of dynamic stall. How to get better aerodynamic performance arouses lots of interests in the design procedure of a straight Darrieus wind turbine. In this paper,mainly the effects of number of blades and tip speed ratio are discussed. Based on the numerical investigation,an assumed asymmetric straight Darrieus wind turbine is proposed to improve the averaged power coefficient. As to the numerical method,the flow around the turbine is simulated by solving the 2D unsteady Navier-Stokes equation combined with continuous equation. The time marching method on a body-fitted coordinate system based on MAC (Marker-and-Cell) method is used. O-type grid is generated for the whole calculation domain. The characteristics of tangential and normal force are discussed related with dynamic stall of the blade. Averaged power coefficient per period of rotating is calculated to evaluate the eligibility of the turbine.展开更多
基金Project (2008ZE53042) supported by National Aerospace Science Foundation of China
文摘In order to conform to dimensional tolerances, an efficient numerical method, displacement iterative compensation method, based on finite element methodology (FEM) was presented for the wax pattern die profile design of turbine blades. Casting shrinkages at different positions of the blade which was considered nonlinear thermo-mechanical casting deformations were calculated. Based on the displacement iterative compensation method proposed, the optimized wax pattern die profile can be established. For a A356 alloy blade, substantial reduction in dimensional and shape tolerances was achieved with the developed die shape optimization system. Numerical simulation result obtained by the proposed method shows a good agreement with the result measured experimentally. After four times iterations, compared with the CAD model of turbine blade, the total form error decreases to 0.001 978 mm from the orevious 0.515 815 mm.
文摘An approach to contour extraction and feature point detection in the 3-D fragment reassembly is proposed. A simple and effective technique is used for building the intrinsic topology of the fragment data suitable for contour extraction. For the scanned data in which the topology is difficult to be achieved, the corresponding solutions are given to manage this problem. A robust approach is used for the curvature and torsion calculation of the discrete contour in a 3-D space. Finally, a method is developed for detecting feature points of the fragment contour based on total curvature. Therefore, the contour description combines the simple global information with local feature points. Experiments with real contour curves extracted from 3-D fragments demonstrate that the proposed method is robust and efficient.
基金Project (50975040) supported by the National Natural Science Foundation of China
文摘Nanogrinding of SiC wafers with high flatness and low subsurface damage was proposed and nanogrinding experiments were carried out on an ultra precision grinding machine with fine diamond wheels. Experimental results show that nanogrinding can produce flatness less than 1.0μm and a surface roughness Ra of 0.42nm. It is found that nanogrinding is capable of producing much flatter SiC wafers with a lower damage than double side lapping and mechanical polishing in much less time and it can replace double side lapping and mechanical polishing and reduce the removal amount of chemical mechanical polishing.
文摘Straight Darrieus wind turbine has attractive characteristics such as the ability to accept wind from random direction and easy installation and maintenance. But its aerodynamic performance is very complicated,especially for the existence of dynamic stall. How to get better aerodynamic performance arouses lots of interests in the design procedure of a straight Darrieus wind turbine. In this paper,mainly the effects of number of blades and tip speed ratio are discussed. Based on the numerical investigation,an assumed asymmetric straight Darrieus wind turbine is proposed to improve the averaged power coefficient. As to the numerical method,the flow around the turbine is simulated by solving the 2D unsteady Navier-Stokes equation combined with continuous equation. The time marching method on a body-fitted coordinate system based on MAC (Marker-and-Cell) method is used. O-type grid is generated for the whole calculation domain. The characteristics of tangential and normal force are discussed related with dynamic stall of the blade. Averaged power coefficient per period of rotating is calculated to evaluate the eligibility of the turbine.