简单摆平硬盘中的坏道

硬盘比较脆弱,如果使用不当就会产生坏道,这是硬盘报废的前奏,应提前对重要数据进行备份。硬盘坏道分“逻辑坏道”和“

Numerical simulation study of the failure evolution process and failure mode of surrounding rock in deep soft rock roadways

Based on the safety coefficient method,which assigns rock failure criteria to calculate the rock mass unit,the safety coefficient contour of surrounding rock is plotted to judge the distribution form of the fractured zone in the roadway.This will provide the basis numerical simulation to calculate the surrounding rock fractured zone in a roadway.Using the single factor and multi-factor orthogonal test method,the evolution law of roadway surrounding rock displacements,plastic zone and stress distribution under different conditions is studied.It reveals the roadway surrounding rock burst evolution process,and obtains five kinds of failure modes in deep soft rock roadway.Using the fuzzy mathematics clustering analysis method,the deep soft surrounding rock failure model in Zhujixi mine can be classified and patterns recognized.Compared to the identification results and the results detected by geological radar of surrounding rock loose circle,the reliability of the results of the pattern recognition is verified and lays the foundations for the support design of deep soft rock roadways.

Deformation failure and countermeasures of deep tertiary extremely soft rock roadway in Liuhai coal mine

In view of failure phenomena with nonlinear large deformation including extensive damage,whole section destruction in short time,high rate of repair,most destruction forms occurred in the tertiary roadway of soft rocks engineering in Liuhai mine,according to the methods of geological survey,theoretical analysis,numerical calculation and in-situ test,the composite failure mechanism of molecular expansion,tectonic stress,gravity stress and engineering deviatoric stress,faults and random joint in this area is analyzed deeply,then an coupling support of double-layer-truss is proposed.The research results show that the first wave of deformation energy was released by bolt-mesh-cable fixed into the roof,floor and two sides of the roadway.While the second wave of deformation energy was released through the interface function between double-layer-truss and the surrounding rock.The double-layer-truss that characterized by high strength,good integrity can absorb high deformation energy of surrounding rocks,which led to the uniform distribution of the stress.Engineering practice shows this technology has been successfully applied to control the deformation failure of the tertiary extremely soft rock roadway.

Mechanical response features and failure process of soft surrounding rock around deeply buried three-centered arch tunnel

Due to the extreme complexity of mechanical response of soft surrounding rock(SR) around a tunnel under high geostatic stress conditions, the integration of physical and numerical modeling techniques was adopted. Based on the similarity theory, new composite-similar material was developed, which showed good agreement with the similarity relation and successfully simulated physico-mechanical properties(PMP) of deep buried soft rock. And the 800 mm×800 mm×200 mm physical model(PM) was conducted, in which the endoscopic camera technique was adopted to track the entire process of failure of the model all the time. The experimental results indicate that the deformation of SR around a underground cavern possessed the characteristics of development by stages and in delay, and the initial damage of SR could induce rapid failure in the later stage, and the whole process could be divided into three stages, including the localized extension of crack(the horizontal load(HL) was in the range of 130 k N to 170 k N, the vertical load(VL) was in the range of 119 k N to 153.8 k N), rapid crack coalescence(the HL was in the range of 170 k N to 210 k N, the VL was in the range of 153.8 k N to 182.5 k N) and residual strength(the HL was greater than 210 k N, the VL was greater than 182.5 k N). Under the high stress conditions, the phenomenon of deformation localization in the SR became serious and different space positions show different deformation characteristics. In order to further explore the deformation localization and progressive failure phenomenon of soft SR around the deeply buried tunnel, applying the analysis software of FLAC3 D three-dimensional explicit finite-difference method, based on the composite strain-softening model of Mohr-Coulomb shear failure and tensile failure, the calculation method of large deformation was adopted. Then, the comparative analysis between the PM experiment and numerical simulation of the three centered arch tunnels was implemented and the relationship of deformation localization and progressive failure of SR around a tunnel under high stress conditions was discussed.