“软工标准40年:新一代软件工程创新发展研讨会”召开

8月23日,“软工标准40年:新一代软件工程创新发展研讨会”在京召开。本次会议以“砥砺四秩 智启新篇”为主题,由全国信标委软件与系统工程分委会(TC28/SC7,以下简称“软工分委会”)、中国电子技术标准化研究院(以下简称“电子标准院”)主办,旨在总结软工分委会40年来工作成效,共同探讨新时期软件工程标准化的新机遇和新挑战。全国政协常委、上海市政协副主席、中国工程院院士钱锋,中国科学院院士、国防科技大学原副校长王怀民,工信部信息技术发展展司领导,电子标准院院长杨旭东出席会议。

传承40年深厚积累共同开启软件工程标准化新篇章

时光荏苒,岁月如梭。转眼间,全国信标委软件与系统工程分委会(TC28/SC7,以下简称“软工分委会”)已经走过了40载春秋。40年的风雨兼程,40年的砥砺前行,软工分委会始终致力于推动软件工程标准化的发展,为我国软件产业做出了不可磨灭的贡献。

基于SpringBoot的地方高校软件工程专业建设管理系统的设计与实现

信息技术的飞速发展提升了各行各业的管理运行效率,地方高校专业建设管理也可借鉴。由于整理繁杂的专业建设资源、评估专业成果水平的工作耗时耗力,文章以地方高校软件工程专业为研究对象,以省级特色高水平专业建设要求为目标,以规范管理为目的研发本系统。系统采用SpringBoot、MyBatis-plus作为后台开发框架,模板引擎Beetl进行前端开发,MySQL关系型数据库作为数据持久库,功能涵盖培养模式及目标、教学资源、课程体系建设、师资队伍、教学质量保障、培养效果和产教融合等,既方便整合、检索专业历年来建设资料,也有助于从数据分析角度出发,精准获取专业在人才培养过程中存在的不足,为科学管理和特色发展服务。系统运行稳定、健壮性强,响应时间快,满足设计要求。

热工软光字牌在FOXBORO I／A系统中的应用

自20世纪70年代以来，以微机为核心的分布式控制系统(DCS系统)将现代高科技的最新成就，计算机技术，通讯技术，CRT显示技术和自动控制技术(即4C技术)集为一体，使自动仪表装置向系统化，分散化，多样化和高性能化的方向产生一个质的飞跃．

多电平逆变器有源软开关技术的研究

分析和比较了多电平逆变器各种有源软开关拓扑的工作原理和主要特点,提出了各种有源软开关拓扑的优缺点。

软土路基常见质量问题及应对措施

本文对高等级公路常见的软土路基质量问题,分析其形成原因。

ZERO-CURRENT AND ZERO-VOLTAGE SWITCHING PWM BOOST FULL-BRIDGE CON VERTER

This paper proposes a zer o current and zero voltage switching (ZCZVS) PWM Boost full bridge (FB) conve rter. With series inductors, the leading switches can realize zero current swit ching (ZCS) in a wide load range using the energy of the output capacitor. Ma king use of parasitic capacitors of the lagging switches and parallel auxiliary i nductance with the primary winding of the transformer, the lagging switches can realize zero voltage switching (ZVS) under any load. Compared with the ZCS PWM Boost FB converter, the new converter has no current duty cycle loss. Operat ional principle and parameter design are analyzed. Experimental results verify the effectiveness of the proposed converter.

Soft X ray Diagnosis on Seed Development and Observation on Seed Germination and Seedling Growth in Artificial Hybridization in Cunninghamia and Cryptomeria

An intergeneric artificial hybridization was conducted between Cunninghamia R. Br. and Cryptomeria D.Don The results are as follows:1. A considerable number of hybrid seeds shed from 76 pollinated cones were empty and a total of 628 looks plump. Soft X ray radiographs showed that, still and all, a majority of the “plump" seeds were embryoless (597, 95.6%) whereas some were partially developed (17,2.7%) and only a few were really full (14, 2.2%). 2. Germination test showed that all of the radiographed hybrid seeds with fully developed embryos were germinable whereas those with partially developed embryos were ungerminable. 3. Physiologically, the growth rate of hypocotyl, the date for shedding of seed coat and spreading of cotyledons, the elongation of epicotyl, and the branching of shoot of the 11 month old seedlings showed a tendency to fall behind those of the female parent; morphologically, the 11 month old hybrid seedlings with linear leaves appeared rather short, slender and weak, whereas the seedlings of the female parents with linear_lanceolate leaves appeared rather tall, stout and strong. 4. It is considered that the hybrid may be true and the crossability reveals a close phylogenetic affinity of Cunninghamia with Cryptomeria.

Practical pattern-based design recovery approach

A practical approach is presented to enlarge the recoverable scope and improve the precision of pattern recovery. To specify both structural aspects and behavioral aspects of design patterns, we introduce traditional predicate logic combined with Alien's interval-based temporal logic as our theoretical foundation. Moreover, we take the Visitor pattern as an example to illustrate how to specify design patterns to support recovery of design patterns besides structural category. The experimental results show that the approach presented is practical for recovering design information of real world systems.

软土土工试验中有关问题分析

现如今,我国的经济和科技都在不断发展,其中包括市政工程、工业工程以及其他的建筑类型等等。另外,在具体的水利设施中都需要进行室内的土木实验。为了获得更加准确的实验数据,工作人员需要按照科学的软土土工试验的顺序以及流程来进行,并且对相关的实验数据进行缜密地分析,在保证工程项目建设安全性和稳定性的前提下保证工程的整体质量。本文中,笔者主要对南方地区软土试验的一般规律和重点问题进行深入分析,旨在解决软土土工试验中的相关问题。

AN APPROACH TO C SOFTWARE REUSE BASED ON DATABASE TECHNIQUES

This paper presents a tool for managing, reusing and analysing C software code based on database techniques. The abstract information of entire software code is stored in a program database that is the conceptual scheme of the entire software, whereas the reuse component is a subscheme. Relational algebra can be conveniently used to manage, analyse and reuse C code. In the tool, we can manage, analyse and reuse any components in the program database and rapidly extract source code of any components or construct the program code of a new system. The rule system is introduced in reusing source code.

Application of system dynamics for assessment of sustainable performance of construction projects

Sustainable performance is expected to become a major factor when examining the feasibility of a construction project in terms of its life cycle performance. The study on which this paper is based developed a simulation model, using system dy- namics methodology, to assess the sustainable performance of projects. Three major factors are used to examine project sus- tainable performance (PSP): the sustainability of economic development (E), the sustainability of social development (S), and the sustainability of environmental development (En). Sustainable development ability (SDA) was used as a prototype to evaluate the degree of sustainable performance. The simulation software ‘ithink’ was used to help with the application of the model to a real life case. This paper explains and demonstrates the procedures used to develop the model and finally offers an approach for assessing the feasibility of a construction project in terms of its sustainable performance.

Characterization of hot deformation behavior of AA2014 forging aluminum alloy using processing map

The hot deformation behavior of AA2014forging aluminum alloy was investigated by isothermal compression tests attemperatures of350-480°C and strain rates of0.001-1s-1on a Gleeble-3180simulator.The corresponding microstructures of thealloys under different deformation conditions were studied using optical microscopy(OM),electron back scattered diffraction(EBSD)and transmission electron microscopy(TEM).The processing maps were constructed with strains of0.1,0.3,0.5and0.7.The results showed that the instability domain was more inclined to occur at strain rates higher than0.1s-1and manifested in theform of local non-uniform deformation.At the strain of0.7,the processing map showed two stability domains:domain I(350-430°C,0.005-0.1s-1)and domain II(450-480°C,0.001-0.05s-1).The predominant softening mechanisms in both of the twodomains were dynamic recovery.Uniform microstructures were obtained in domain I,and an extended recovery occurred in domainII,which would lead to the potential sub-grain boundaries progressively transforming into new high-angle grain boundaries.Theoptimum hot working parameters for the AA2014forging aluminum alloy were determined to be370-420°C and0.008-0.08s-1.

Optimization of construction scheme and supporting technology for HJS soft rock tunnel

For a soft rock tunnel under high stress in jointed and swell soft rock （HJS）, two construction schemes pilot-tunneling enlarging excavation and step-by-step excavation were optimized using FLAC20, and the deformation effects of the two construction schemes were verified by field tests. Based on engineer- ing geological investigation and mechanical analysis of large deformations, the complex deformation mechanisms of stress expansion and structural deformation of the soft rock tunnel were confirmed, and support countermeasures from the complex deformation mechanism converted to a single type were proposed, and the support parameters were optimized by field tests. These technologies were proved by engineering practice, which produced significant technical and economic benefits.

External Heat Transfer in Moist Air and Superheated Steam for Softwood Drying

In kiln drying of softwood timber, external heat and moisture mass transfercoefficients are important in defining boundary temperature and moisture content at the woodsurface. In addition, superheated steam drying of wood is a promising technology but this has notbeen widely accepted commercially, partially due to the lack of understanding of the dryingphenomena occurred during drying. In this work, experimental investigation was performed to quantifythe heat transfer between wood surface and surrounding moist air or superheated steam. In theexperiment, saturated radiata pine sapwood samples were dried using dry-bulb/wet-bulb temperaturesof 60℃/50℃, 90℃/60℃, 120℃/70℃, 140℃/90℃, 160℃/90℃, 140℃/100℃ and 160℃/100℃. The lasttwo schedules were for superheated steam drying as the wet-bulb temperature was set at 100℃. Thecirculation velocity over the board surface was controlled at 4.2m·s^(-1). Two additional runs(90℃/60℃) using air velocities of 2.4 m·s^(-1) and 4.8 m·s^(-1) were performed to check theeffect of the circulation velocity. During drying, sample weight and temperatures at wood surfaceand different depths were continuously measured. Prom these measurements, changes in woodtemperature and moisture content were calculated and external heat-transfer coefficient wasdetermined for both the moist air and the superheated steam drying.

Exploration of tortoise shell structure mechanical characteristics

As one of the oldest creatures on the earth, the tortoises have formed a nearly perfect shell structure after millions of years of evolution In this paper, Chinese tortoise shell is studied. Firstly, the scanning model of the tortoise shell is established by means of computer tomography （CT） scanning technology and MIMICS software. Secondly, the solid model of three-dimensional structure of the tortoise shell is constructed by using geomagic studio reverse engineering software. Afterwards, the compression numerical simulation of the tortoise shell structure under low strain rate is conducted with the help of finite element software LS-DYNA. Finally, load-bearing characteristics of the tortoise shell structure and dome-shaped structure are compared and analyzed. The results show that compared withthe dome-shaped structure with the same volume, tortoise shell structure has a higher structural rigidity and can withstand higher pressure. Therefore, tortoise shell structure provide some reference to the design of armored vehicles, sheltersand other types of thin shell structures.

Research of the Control Domain of Edges in Regression Testing

Regression testing is the process of validating modified software to provide confidence that the changed parts of the software behave as intended and that the unchanged parts have not been adversely affected by the modifications. The goal of regression testing is to reduce the test suit by testing the new characters and the modified parts of a program with the original test suit. Regression testing is a high cost testing method. This paper presents a regression testing selection technique that can reduce the test suit on the basis of Control Flow Graph (CFG). It import the inherit strategy of object-oriented language to ensure an edge’s control domain to reduce the test suit size effectively. We implement the idea by coding the edge. An algorithm is also presented at last.

Development of fractures in soft rock surrounding a roadway and their control

As the excavation of roadway, new fractures will be formed and the pre-existing fractures extend with the redistribution of stress in surrounding rocks. Eventually, fracture zone and bed separation are formed in rocks because of the developed fractures. Therefore, mastering the fracture evolution of surrounding rocks is very important to maintain the stability of roadway. The surrounding rocks of main haulage road- way in a certain coal mine is so broken and loose that the supporting is very difficult. Based on compre- hensive anal[ysis of the engineering geological conditions, a sight instrument was used to observe the fractures of internal surrounding rocks, Four indices, i.e., the width of fracture zone W, the number of fractures n, the width of fractures d and rock fracture designation RFD, are put forward to evaluate the fracture dewelopment. According to the evolution rules of the soft rock roadway from this paper, control principles by stages and by regions are presented through the research. At the same time, the best time of grouting reinforcement is determined on the basis of fracture saturation. Field practice shows that the roadway can satisfy normal production during service periods by suitable first support and grouting reinforcement.

Study of Fussy Clustering of Engineering Geological Environment with GIS

Based on previous evaluating methods, a new method which combines GIS with Fussy Clustering algorithm is proposed and applied in evaluating the engineering geological environment of the research area of XuZHou City in this paper. By analyzing the characteristics and formation of engineering geological environment,the major problems are discussed, including stability of basement rock, sandy soil liquefaction and cultural stratum.According to effecting factors of these problems, the stability of every engineering geological problem in the worked area is classified into different classes. Then, the Fussy Clustering method is used in assessing all conditions of engineering geological environment. Finally, the evaluation is fulfilled in the whole studied area. The calculating result shows the method is feasible.

Kinetics for static recrystallization after hot working of 0.38C-0.99Cr-0.16Mo steel

The restoration mechanisms for static recrystallization of work-hardened austenite were investigated by using double-pass compression tests performed on medium-carbon steel containing chromium and molybdenum. The softening fraction was defined by 2% offset method. The results show that Avrami exponent of about 0.21 is insensitive to deformation temperature, indicating that the action of steel grade should be considered. The time of 50% recrystallization (t0.5) decreases noteworthily with the increase of deformation temperature. Apparent activation energy for static recrystallization of 195 kJ/mol, which is close to that of vanadium microalloyed steel, is obtained by calculating. The increasing trend of the driving force for recrystallization is opposite to that of the deformation temperature, which is attributed to the number of operative slip system increasing as temperature increasing.