Pulp fiber length characterization is addressed in this article. It is .suggested that the proposed separation index H（L） is a viable index to the fiber fractionation performance for evaluating hydrocyclones. Fracti...Pulp fiber length characterization is addressed in this article. It is .suggested that the proposed separation index H（L） is a viable index to the fiber fractionation performance for evaluating hydrocyclones. Fractionation of softwood （coniferous wood） bleached chemithermomechanical pulp （BCTMP） fiber was carried out with a cylindrical hydrocyclone. Pulp fiber length characteristics in different streams were examined using the fiber quality analyzer （FQA）, and the cumulative fiber length fraction, the fiber length fraction density function and the separation index H（L） for different streams were obtained. It is found that H（L） is very useful for characterizing the fiber fractionation performance by indicating the separation capacity of hydrocyclone for individual subgroup of fibers in different streams under different operation conditions. Results of H（L） show that there exists a critical fiber length. A higher proportion of fibers longer than the critical fiber length is in the overflow stream, and a higher proportion of fibers shorter than the critical fiber length in the undertow stream. The data obtained from FQA suggest that the split ratio is the most significant parameter for fiber fractionation performance, which is the best when the split ratio is in the range between 0.14 and 0.2. The effect of feed rate on fiber fractionation performance is weak.展开更多
A new method was proposed to predict the limited compaction grouting pressure for the soft soils. Theoretical basis of the method considered the conical shear failure above the grout bulb. Using the Mohr-Coulomb yield...A new method was proposed to predict the limited compaction grouting pressure for the soft soils. Theoretical basis of the method considered the conical shear failure above the grout bulb. Using the Mohr-Coulomb yield criterion as the initial yield function, the limited compaction grouting pressure was determined, according to the softening elastic-plastic model based on the conventional triaxial compression tests to simulate the strain softening soils. The small strain in the elastic zone and large stain in the plastic zone and the rational yield function for the strain softening phase stage, the analytical solutions to the compaction grouting pressure were presented. The results indicate reasonable agreement and show a good potential of the proposed method for rationally optimizing the design of compaction grouting operations.展开更多
The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with de...The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with development of methods, a new model is presented. To validate the analytical model, five different profiles modeled by ANSYS software. The profile of rock bolts T3 and T4with load transfer capacity,respectively 180 and 195 kN in the jointed rocks was selected as the optimum profiles. Finally, the selected profiles were examined in Tabas Coal Mine. FLAC analysis indicates that patterns 6+7 with2 NO flexi bolt 4 m better than other patterns within the faulted zone.展开更多
A series of centrifuge model tests exploring the effects of different types of slurry on long-trench stability in soft clay were conducted. The influence of groundwater conditions relative to trench stability was exam...A series of centrifuge model tests exploring the effects of different types of slurry on long-trench stability in soft clay were conducted. The influence of groundwater conditions relative to trench stability was examined by constructing long trenches using different slurries. The soil deformation and surface settlement induced by the excavation of the trench are found to be closely related to slurry type and excavation depth of the long trench. Increasing the bentonite concentration of the slurry has beneficial effects on stability: 1) larger particles can improve local and global stability in cases where filter cakes do not form, and 2) larger viscosity can promote filter cake formation on the walls of long trenches excavated in soft clay and enhance their stability.展开更多
The properties of broken rock before and after grouting reinforcement are studied. Testing results show that grouting can raise the residual strength of broken rock, and the broken rockness by grouting can keep the st...The properties of broken rock before and after grouting reinforcement are studied. Testing results show that grouting can raise the residual strength of broken rock, and the broken rockness by grouting can keep the steady supporting capacity within a relatively large deformation range. Revealing of the characteristics of stage deformation and damage process comes to the conclusion that the supporting of soft rock roadway should be analyzed in a dynamic view, and the grouting should be delayed at a proper occasion. Based on the above, the stepwise reinforcement technology characterized by immediate shotcreting, timely bolting and delay grouting is put forward and illustrated with a successful engineering practice.展开更多
Aiming at soft rock ground support issues under conditions of high stress and long-term water immersion, the ground failure mechanism is revealed by taking the deep-water sumps of Jiulong Mine as the engineering backg...Aiming at soft rock ground support issues under conditions of high stress and long-term water immersion, the ground failure mechanism is revealed by taking the deep-water sumps of Jiulong Mine as the engineering background and employing field investigation, tests of rock structure, mechanical properties and mineral composition. The main factors leading to the surrounding rock failure include the high and complex stress state of the water sumps, high-clay content and water-weakened rock, and the unreasonable support design. In this paper, the broken and fractured rock mass near roadway opening is considered as ground small-structure, and deep stable rock mass as ground large-structure. A support technology focusing on cutting off the water, strengthening the small structure of the rock and transferring the large structure of the rock is proposed. The proposed support technology of interconnecting the large and small structures, based on high-strength bolts, high-stiffness shotcrete layer plugging water,strengthening the small structure with deep-hole grouting and shallow-hole grouting, highpretensioned cables tensioned twice to make the large and small structures bearing the pressure evenly,channel-steel and high-pretensioned cables are used to control floor heave. The numerical simulation and field test show that this support system can control the rock deformation of the water sumps and provide technical support to similar roadway support designs.展开更多
Based on guided wave theory and considering the grouted rock bolt as waveguide medium, we have constructed a three dimensional model of grouted rock bolt with the dynamics of finite difference numerical simulation sof...Based on guided wave theory and considering the grouted rock bolt as waveguide medium, we have constructed a three dimensional model of grouted rock bolt with the dynamics of finite difference numerical simulation software FLAC3D4.0, and simulated the propagation behavior of the guided wave in the full grouted rock bolt. The simulated waveform and wave velocity matched well with the experimental results. We have made a more in-depth and comprehensive study of the wave velocity, wave component and attenuation characteristics of the guided wave propagating in rock bolt, and found some new characteristics and phenomena. In addition, some phenomena that haven’t been explained in the previous researches have also been discussed in this paper. The result showed that when guided wave propagates in grouted rock bolt, after the body wave decays, there is still the interface wave-Stoneley wave that does not decay in the axial direction of the bolt. The findings can provide some reference for rock bolt testing and the selection of the optimal excitation wave of testing.展开更多
文摘Pulp fiber length characterization is addressed in this article. It is .suggested that the proposed separation index H（L） is a viable index to the fiber fractionation performance for evaluating hydrocyclones. Fractionation of softwood （coniferous wood） bleached chemithermomechanical pulp （BCTMP） fiber was carried out with a cylindrical hydrocyclone. Pulp fiber length characteristics in different streams were examined using the fiber quality analyzer （FQA）, and the cumulative fiber length fraction, the fiber length fraction density function and the separation index H（L） for different streams were obtained. It is found that H（L） is very useful for characterizing the fiber fractionation performance by indicating the separation capacity of hydrocyclone for individual subgroup of fibers in different streams under different operation conditions. Results of H（L） show that there exists a critical fiber length. A higher proportion of fibers longer than the critical fiber length is in the overflow stream, and a higher proportion of fibers shorter than the critical fiber length in the undertow stream. The data obtained from FQA suggest that the split ratio is the most significant parameter for fiber fractionation performance, which is the best when the split ratio is in the range between 0.14 and 0.2. The effect of feed rate on fiber fractionation performance is weak.
基金Project (200550) supported by the Foundation for the Author of National Excellent Doctoral Dissertation of ChinaProject (09JJ1008) supported by Hunan Provincial Natural Science Foundation of China
文摘A new method was proposed to predict the limited compaction grouting pressure for the soft soils. Theoretical basis of the method considered the conical shear failure above the grout bulb. Using the Mohr-Coulomb yield criterion as the initial yield function, the limited compaction grouting pressure was determined, according to the softening elastic-plastic model based on the conventional triaxial compression tests to simulate the strain softening soils. The small strain in the elastic zone and large stain in the plastic zone and the rational yield function for the strain softening phase stage, the analytical solutions to the compaction grouting pressure were presented. The results indicate reasonable agreement and show a good potential of the proposed method for rationally optimizing the design of compaction grouting operations.
文摘The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with development of methods, a new model is presented. To validate the analytical model, five different profiles modeled by ANSYS software. The profile of rock bolts T3 and T4with load transfer capacity,respectively 180 and 195 kN in the jointed rocks was selected as the optimum profiles. Finally, the selected profiles were examined in Tabas Coal Mine. FLAC analysis indicates that patterns 6+7 with2 NO flexi bolt 4 m better than other patterns within the faulted zone.
基金Project(41202220)supported by the National Natural Science Foundation of ChinaProject(20120022120003)supported by the Research Fund for the Doctoral Program of Higher Education,ChinaProject(2652012065)supported by the Fundamental Research Funds for the Central Universities and Beijing Higher Education Young Elite Teacher Program,China
文摘A series of centrifuge model tests exploring the effects of different types of slurry on long-trench stability in soft clay were conducted. The influence of groundwater conditions relative to trench stability was examined by constructing long trenches using different slurries. The soil deformation and surface settlement induced by the excavation of the trench are found to be closely related to slurry type and excavation depth of the long trench. Increasing the bentonite concentration of the slurry has beneficial effects on stability: 1) larger particles can improve local and global stability in cases where filter cakes do not form, and 2) larger viscosity can promote filter cake formation on the walls of long trenches excavated in soft clay and enhance their stability.
文摘The properties of broken rock before and after grouting reinforcement are studied. Testing results show that grouting can raise the residual strength of broken rock, and the broken rockness by grouting can keep the steady supporting capacity within a relatively large deformation range. Revealing of the characteristics of stage deformation and damage process comes to the conclusion that the supporting of soft rock roadway should be analyzed in a dynamic view, and the grouting should be delayed at a proper occasion. Based on the above, the stepwise reinforcement technology characterized by immediate shotcreting, timely bolting and delay grouting is put forward and illustrated with a successful engineering practice.
基金sponsored by the National Natural Science Foundation of China(Nos.51134025 and 51274204)the New Century Excellent Talents in University(No.NCET-12-0965)
文摘Aiming at soft rock ground support issues under conditions of high stress and long-term water immersion, the ground failure mechanism is revealed by taking the deep-water sumps of Jiulong Mine as the engineering background and employing field investigation, tests of rock structure, mechanical properties and mineral composition. The main factors leading to the surrounding rock failure include the high and complex stress state of the water sumps, high-clay content and water-weakened rock, and the unreasonable support design. In this paper, the broken and fractured rock mass near roadway opening is considered as ground small-structure, and deep stable rock mass as ground large-structure. A support technology focusing on cutting off the water, strengthening the small structure of the rock and transferring the large structure of the rock is proposed. The proposed support technology of interconnecting the large and small structures, based on high-strength bolts, high-stiffness shotcrete layer plugging water,strengthening the small structure with deep-hole grouting and shallow-hole grouting, highpretensioned cables tensioned twice to make the large and small structures bearing the pressure evenly,channel-steel and high-pretensioned cables are used to control floor heave. The numerical simulation and field test show that this support system can control the rock deformation of the water sumps and provide technical support to similar roadway support designs.
基金supported by the Specialized Research Fund for the Doc-toral Program of Higher Education (Grant No. 20090211110016)the Gansu Provincial Natural Science Foundation of China (Grant No. 096RJZA048)
文摘Based on guided wave theory and considering the grouted rock bolt as waveguide medium, we have constructed a three dimensional model of grouted rock bolt with the dynamics of finite difference numerical simulation software FLAC3D4.0, and simulated the propagation behavior of the guided wave in the full grouted rock bolt. The simulated waveform and wave velocity matched well with the experimental results. We have made a more in-depth and comprehensive study of the wave velocity, wave component and attenuation characteristics of the guided wave propagating in rock bolt, and found some new characteristics and phenomena. In addition, some phenomena that haven’t been explained in the previous researches have also been discussed in this paper. The result showed that when guided wave propagates in grouted rock bolt, after the body wave decays, there is still the interface wave-Stoneley wave that does not decay in the axial direction of the bolt. The findings can provide some reference for rock bolt testing and the selection of the optimal excitation wave of testing.
