期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
软连接件在移动中无积累误差快速分切
1
作者 张靖然 《电器工厂设计》 2001年第3期14-18,共5页
本文对蓄电池生产中软连接件在移动中怎样完成无积累误差定长快速分切技术进行分析阐述。
关键词 蓄电池 软连接件 移动 无积累误差 快速分切
下载PDF
炉顶探尺电机编码器运行硬件故障分析与改进
2
作者 刘超 毛吉 +2 位作者 何枰 梅盛 岑家贵 《浙江冶金》 2024年第1期35-38,共4页
宁钢炼铁厂高炉炉内料线位置依靠炉顶平台的三台机械探尺进行检测,在探尺变频电机后轴上通过联轴器联接一件增量型编码器来检测探锤下放深度,这个变化量通过编码器转换成电信号传给译码器再转换成模拟量来显示。时常会因电机频繁高速正... 宁钢炼铁厂高炉炉内料线位置依靠炉顶平台的三台机械探尺进行检测,在探尺变频电机后轴上通过联轴器联接一件增量型编码器来检测探锤下放深度,这个变化量通过编码器转换成电信号传给译码器再转换成模拟量来显示。时常会因电机频繁高速正反旋转造成联轴器断裂或轴套松动而导致编码器检测信号错误,引起变频器报故障停机而中断炉内放料操作。本文对降低联轴器故障率及如何节省检修时间进行研究和改进。 展开更多
关键词 探尺 编码器联轴器 软连接件 支架
下载PDF
Design of Demodulation System of Interferometric Sensor Based on Labview 被引量:3
3
作者 XU Wei WANG Jin-hai +2 位作者 CHEN Cai-he ZHENG Yu ZHANG Cheng 《Semiconductor Photonics and Technology》 CAS 2008年第2期115-120,共6页
For the modified demodulation arithmetic of 3×3 coupler, the processing software built on the basis of Labview is able to demodulate asymmetric 3×3 coupler signal and do further spectrum analysis. It shows t... For the modified demodulation arithmetic of 3×3 coupler, the processing software built on the basis of Labview is able to demodulate asymmetric 3×3 coupler signal and do further spectrum analysis. It shows that the measured frequency ranges from 10 Hz to 1 000 Hz and phase range is covered by -10 rad^10 rad. The phase sensitivity is 0.5 V/rad. This system is proved to show high resolution and wide dynamic range. 展开更多
关键词 asymmetric 3×3 coupler phase demodulation LABVIEW software demodulation interferometric sensor
下载PDF
Differential uplift and settlement between inner column and diaphragm wall in top-down excavation 被引量:5
4
作者 王丽 郑刚 欧若楠 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第9期3578-3590,共13页
Top structure and basement will confront the risk of being damaged on account of large stress and strain fields incurred by differential uplift and settlement between inner column and diaphragm wall in top-down method... Top structure and basement will confront the risk of being damaged on account of large stress and strain fields incurred by differential uplift and settlement between inner column and diaphragm wall in top-down method. Top-down excavation of the Metro Line 10 in Shanghai was modeled with finite element analysis software ABAQUS and parameters of subsoil were obtained by inverse analysis. Based on the finite element model and parameters, changes in the following factors were made to find more effective methods to restrain differential uplift and settlement: length of diaphragm wall, thickness of jet-grouting reinforcement layer, ways of subsoil reinforcement, sequence of pit excavation, connection between slabs and diaphragm wall or column and width of pit. Several significant results are acquired. The longer the diaphragm wall is, the greater the differential uplift between column and diaphragm wall is. Rigidity of roof slab is in general not strong enough to keep diaphragm wall and column undergoing the same uplift during excavation; Uplift at head of column and differential uplift between column and diaphragm wall decrease when subsoil from-16.6 to-43 m in pit is reinforced through jet-grouting. But, as excavation proceeds to a lower level, benefit from soil reinforcement diminishes. During the process applying vertical load, the larger the depth of diaphragm wall is, the smaller the settlement is at head of column and diaphragm wall, and the greater the differential settlement is between column and diaphragm wall. When friction connection is implemented between column, diaphragm wall and floor slabs, uplifts at head of column and diaphragm wall are larger than those of the case when tie connection is implemented, and so does differential uplift between column and diaphragm wall. The maximum deflection of diaphragm wall decreases by 58% on account of soil reinforcement in pit. The maximum deflection of diaphragm wall decreases by 61.2% when friction connection is implemented instead of tie connection. 展开更多
关键词 top-down method differential uplift differential settlement jump-layer excavation diaphragm wall with outriggers
下载PDF
Remote Control of Fed-Batch Fermentation Systems
5
作者 Eric Moreau Floyd Inman, III +2 位作者 Sunita Singh Heather Walters Leonard Holmes 《Journal of Chemistry and Chemical Engineering》 2011年第10期897-902,共6页
Bioreactor operation requires continuous monitoring of fermentation parameters and real-time control over bioreactor devices. Remote monitoring and control of the bioreactor's computer via the Internet avoids the nec... Bioreactor operation requires continuous monitoring of fermentation parameters and real-time control over bioreactor devices. Remote monitoring and control of the bioreactor's computer via the Internet avoids the necessity of personnel being continually onsite during operation. A two liter Sartorius-stedim Biostat~ A Plus fermentation system was networked and interfaced with the commercial software from GoToMyPC to allow remote control of the fermentation system utilizing the internet. The fermentation vessel was equipped with hardware calibrated for monitoring and controlling culture parameters during experimentations. The uniform resource locator controlled night-vision web camera allowed continuous monitoring of the glass fermentation vessel during the day and at night. The main window screen of the laboratory computer can be securely accessed from any portable device (i.e. laptop) capable of establishing an Internet connection and executing the commercial software from GoToMyPC. The secured internet protocol address, provided by GoToMyPC, assures that the system can only be controlled by authorized users who have been given access to the account. This interface permits the remote control of the Biostat A Plus fermentation system and possibly other automated or potentially automated culturing systems at the convenience of the user(s). 展开更多
关键词 FERMENTATION FED-BATCH Remote-monitoring Remote-controlled fermentation systems
下载PDF
Internet-Oriented Optimization Schemes for Joint Compression and Encryption
6
作者 WANG Yilei CHANG Xiaotao +2 位作者 Amit Golander Hubertus Franke CHEN Beijing 《China Communications》 SCIE CSCD 2015年第10期158-168,共11页
Compression and encryption are widely used in network traffic in order to improve efficiency and security of some systems.We propose a scheme to concatenate both functions and run them in a paralle pipelined fashion,d... Compression and encryption are widely used in network traffic in order to improve efficiency and security of some systems.We propose a scheme to concatenate both functions and run them in a paralle pipelined fashion,demonstrating both a hardware and a software implementation.With minor modifications to the hardware accelerators,latency can be reduced to half.Furthermore,we also propose a seminal and more efficient scheme,where we integrate the technology of encryption into the compression algorithm.Our new integrated optimization scheme reaches an increase of 1.6X by using parallel software scheme However,the security level of our new scheme is not desirable compare with previous ones.Fortunately,we prove that this does not affect the application of our schemes. 展开更多
关键词 compression and encryption 3DES Lempel-Ziv algorithm.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部