In order to investigate the size effect and other effects on the stress-strain relationship of confined concrete, 42 specimens with different sizes and section shapes were placed under axial compression loading. Effec...In order to investigate the size effect and other effects on the stress-strain relationship of confined concrete, 42 specimens with different sizes and section shapes were placed under axial compression loading. Effects of key parameters such as size of specimens, tie configuration, transverse reinforcement ratio, and concrete cover were studied. The results show that for specimens with the same configuration and the same volumetric ratio of the transverse reinforcement, along with the increasing specimen size, the peak stress, peak strain and deformation of the post-peak show a down trend, however, the volumetric ratio of the transverse reinforcement is lowered, the decreasing of the peak stress is accelerated, but the decreasing of the deformation is slow down. For specimens with the same volumetric ratio but different configurations of transverse reinforcement, though the transverse reinforcement configuration becomes more complicated, the peak stress of the large size specimen does not improve more than that of the small size. However, the deformation occurs before the stress declines to 85% of peak stress, and the improvement with the grid pattern tie configuration is much greater due to size effect.展开更多
This paper provides a review of recent research advances and trends in the area of stability of unstiffened circular cylindrical shells subjected to general non-uniform axial compressive stresses.Only the more importa...This paper provides a review of recent research advances and trends in the area of stability of unstiffened circular cylindrical shells subjected to general non-uniform axial compressive stresses.Only the more important and interesting aspects of the research,judged from a personal viewpoint,are discussed.They can be crudely classified into four categories:(1) shells subjected to non-uniform loads;(2) shells on discrete supports;(3) shells with intended cutouts/holes;and (4) shells with non-uniform settlements.展开更多
Using an MTS816.03 test system and self-designed seepage apparatus, seepage tests of saturated broken rocks were conducted, and the influence of lithology, axial stress, grain size distribution and loading rate on see...Using an MTS816.03 test system and self-designed seepage apparatus, seepage tests of saturated broken rocks were conducted, and the influence of lithology, axial stress, grain size distribution and loading rate on seepage characteristics was analyzed. The results show that： （1） Under the same axial stress （12 MPa）, the permeability of different lithologic samples increases in the order： gangue 〈 mudstone 〈 sandstone 〈 limestone. The permeability of gangue is 3 magnitudes lower than that of limestone. The absolute value of the non-Darcy coefficient β increases in the order： limestone 〈 sandstone 〈 mudstone 〈 gangue. The non-Darcy coefficient β of limestone, which is positive, is 5 magnitudes lower than that of gangue. （2） With increasing axial stress, the permeability of saturated broken sandstone decreases, and the absolute value of the non-Darcy coefficient β increases. After the axial stress exceeds 12 MPa, the curves of permeability and non-Darcy coefficient β all tend to be stable. （3） With increasing Talbol power exponent, the permeability increases, and the absolute value of the non-Darcy coefficient β decreases. （4） With increasing loading, the permeability increases, and the absolute value of the non-Darcy coefficient β decreases. When the loading rate is 0.5 kN/s, the non-Darcy coefficient β is positive.展开更多
Experimental investigation was conducted to characterize the responses of high performance concrete(HPC) subjected to multiaxial compressive stresses. The HPC specimens were prepared with three different mix proportio...Experimental investigation was conducted to characterize the responses of high performance concrete(HPC) subjected to multiaxial compressive stresses. The HPC specimens were prepared with three different mix proportions, which corresponds to three different uniaxial compressive strengths. The cubic specimens with size of 100 mm for each edge were tested with servo-hydraulic actuators at different stress ratios. The principal stresses and strains of the specimens were recorded, and the failure of the cubic specimens under various stress states was examined. The experimental results indicated that the stress states and stress ratios had significant influence on the strength and deformation of HPC under biaxial and triaxial compression, especially under triaxial compression. Failure criteria were proposed for the HPC specimens under biaxial and triaxial compressive loading. The test results provided a valuable reference for obtaining multi-axial constitutive law for HPC.展开更多
基金Project(50838001) supported by the National Natural Science Foundation of China
文摘In order to investigate the size effect and other effects on the stress-strain relationship of confined concrete, 42 specimens with different sizes and section shapes were placed under axial compression loading. Effects of key parameters such as size of specimens, tie configuration, transverse reinforcement ratio, and concrete cover were studied. The results show that for specimens with the same configuration and the same volumetric ratio of the transverse reinforcement, along with the increasing specimen size, the peak stress, peak strain and deformation of the post-peak show a down trend, however, the volumetric ratio of the transverse reinforcement is lowered, the decreasing of the peak stress is accelerated, but the decreasing of the deformation is slow down. For specimens with the same volumetric ratio but different configurations of transverse reinforcement, though the transverse reinforcement configuration becomes more complicated, the peak stress of the large size specimen does not improve more than that of the small size. However, the deformation occurs before the stress declines to 85% of peak stress, and the improvement with the grid pattern tie configuration is much greater due to size effect.
文摘This paper provides a review of recent research advances and trends in the area of stability of unstiffened circular cylindrical shells subjected to general non-uniform axial compressive stresses.Only the more important and interesting aspects of the research,judged from a personal viewpoint,are discussed.They can be crudely classified into four categories:(1) shells subjected to non-uniform loads;(2) shells on discrete supports;(3) shells with intended cutouts/holes;and (4) shells with non-uniform settlements.
基金provided by the National Basic Research Program of China (No.2013CB227900)the Ordinary University Graduate Student Research Innovation Project in Jiangsu Province for 2014 (No.KYLX_1370)the National Natural Science Foundation of China (Nos.11502229 and 51404266)
文摘Using an MTS816.03 test system and self-designed seepage apparatus, seepage tests of saturated broken rocks were conducted, and the influence of lithology, axial stress, grain size distribution and loading rate on seepage characteristics was analyzed. The results show that： （1） Under the same axial stress （12 MPa）, the permeability of different lithologic samples increases in the order： gangue 〈 mudstone 〈 sandstone 〈 limestone. The permeability of gangue is 3 magnitudes lower than that of limestone. The absolute value of the non-Darcy coefficient β increases in the order： limestone 〈 sandstone 〈 mudstone 〈 gangue. The non-Darcy coefficient β of limestone, which is positive, is 5 magnitudes lower than that of gangue. （2） With increasing axial stress, the permeability of saturated broken sandstone decreases, and the absolute value of the non-Darcy coefficient β increases. After the axial stress exceeds 12 MPa, the curves of permeability and non-Darcy coefficient β all tend to be stable. （3） With increasing Talbol power exponent, the permeability increases, and the absolute value of the non-Darcy coefficient β decreases. （4） With increasing loading, the permeability increases, and the absolute value of the non-Darcy coefficient β decreases. When the loading rate is 0.5 kN/s, the non-Darcy coefficient β is positive.
基金supported by the National Natural Science Foundation of China(Grant No.51278118)the National Basic Research Program of China("973"Project)(Grant No.2009CB623200)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Experimental investigation was conducted to characterize the responses of high performance concrete(HPC) subjected to multiaxial compressive stresses. The HPC specimens were prepared with three different mix proportions, which corresponds to three different uniaxial compressive strengths. The cubic specimens with size of 100 mm for each edge were tested with servo-hydraulic actuators at different stress ratios. The principal stresses and strains of the specimens were recorded, and the failure of the cubic specimens under various stress states was examined. The experimental results indicated that the stress states and stress ratios had significant influence on the strength and deformation of HPC under biaxial and triaxial compression, especially under triaxial compression. Failure criteria were proposed for the HPC specimens under biaxial and triaxial compressive loading. The test results provided a valuable reference for obtaining multi-axial constitutive law for HPC.
