Computer aided design on the Internet/Intranet explores new frontiers in design environment. A new Web based CAD system is introduced. The users can install the CAD system on the server to build three dimensional m...Computer aided design on the Internet/Intranet explores new frontiers in design environment. A new Web based CAD system is introduced. The users can install the CAD system on the server to build three dimensional models of products through a Web browser in any operation systems. No system installation and system maintenance are required. A new architecture and the database of system are discussed. The UML models of the system are presented. The proposed organization is implemented on the World Wide Web using Java and CORBA.展开更多
To estimate the geometric characteristics, especially wet areas and section areas, of three dimensional numerical conceptual aircraft models, a method based on surface elements is proposed. On the premise that numerou...To estimate the geometric characteristics, especially wet areas and section areas, of three dimensional numerical conceptual aircraft models, a method based on surface elements is proposed. On the premise that numerous surface elements are generated to represent each component surface, a component wet area of the surface is estimated by adding up the areas of such elements that are not covered by any other component surfaces. The elements are also used to get the section polygons of such composite surfaces as the whole aircraft at a given body station, then a section area is approximated with the sum of trapezoidal areas between such sides of polygons that are not covered by any other component and a reference axis. Practical application to a computer aided aircraft conceptual design system shows that the methed is applicable to different kinds of conceptual aircraft models and its precision is satisfying to the conceptual design.展开更多
Simulations of photoresist etching,aerial image,exposure,and post-bake processes are integrated to obtain a photolithography process simulation for microelectromechanical system（MEMS） and integrated circuit（IC） fa...Simulations of photoresist etching,aerial image,exposure,and post-bake processes are integrated to obtain a photolithography process simulation for microelectromechanical system（MEMS） and integrated circuit（IC） fabrication based on three-dimensional （3D） cellular automata（CA）. The simulation results agree well with available experimental results. This indicates that the 3D dynamic CA model for the photoresist etching simulation and the 3D CA model for the post-bake simulation could be useful for the monolithic simulation of various lithography processes. This is determined to be useful for the device-sized fabrication process simulation of IC and MEMS.展开更多
Feature based design has been regarded as a promising approach for CAD/CAM integration.This paper aims to establish a domain independent representation formalism for feature based design in three aspects: formal re...Feature based design has been regarded as a promising approach for CAD/CAM integration.This paper aims to establish a domain independent representation formalism for feature based design in three aspects: formal representation,design process model and design algorithm.The implementing scheme and formal description of feature taxonomy,feature operator,feature model validation and feature transformation are given in the paper.The feature based design process model suited for either sequencial or concurrent engineering is proposed and its application to product structural design and process plan design is presented. Some general design algorithms for developing feature based design system are also addressed.The proposed scheme provides a formal methodology elementary for feature based design system development and operation in a structural way.展开更多
Design of internal combustion engine (ICE) components is one of the earliest and also the most active areas in which computer aided modeling techniques are applied. Computer aided modeling techniques could provide req...Design of internal combustion engine (ICE) components is one of the earliest and also the most active areas in which computer aided modeling techniques are applied. Computer aided modeling techniques could provide requisite information for follow up designing segments such as structural analysis, design of technological process and manufacturing etc, and thereby lead to the reduction of product design period and the quality and reliability improvement of ICE components. So the developing situations of ICE components' 2 D drafting, 3 D modeling of ICE, overall CAD of ICE as well as component design expert system etc. are surveyed, which are the typical applications of computer aided modeling techniques in ICE component design process, and some existent problems and tasks are pointed out so as to make some references for the further research work.展开更多
A system architecture of solid-based NC simulation for milling machining is given, the function of which is composed of cutting simulation of different cutters, such as flat-end cutters, ball-end cutters, dome-end cut...A system architecture of solid-based NC simulation for milling machining is given, the function of which is composed of cutting simulation of different cutters, such as flat-end cutters, ball-end cutters, dome-end cutters, angle cutters and drill cutters, rapid pre-checking of interference, detection of collision, and visualization of over cut in the stock. A new method based on the design model is raised to detect the collision and pre-check the interference during NC milling machining. A special problem about the construction of a cutter′s swept volume, self-intersection is discussed. All the work on the construction, the subtraction and the display of solids is accomplished with the help of ACIS 3-D modeling.展开更多
A new partitioning methodology is presented to accelerate 130nm and beyond large scale alternating phase shift mask(Alt PSM) design flow.This method deals with granularity self adaptively.Phas...A new partitioning methodology is presented to accelerate 130nm and beyond large scale alternating phase shift mask(Alt PSM) design flow.This method deals with granularity self adaptively.Phase conflicts resolution approaches are described and strategies guaranteeing phase compatible during layout compaction are also discussed.An efficient CAD prototype for dark field Alt PSM based on these algorithms is implemented.The experimental results on several industry layouts show that the tool can successfully cope with the rapid growth of phase conflicts with good quality and satisfy lower resource consumption with different requirements of precision and speedup.展开更多
This paper outlines a concurrent engineering environment that supports interaction between members of a geographically dispersed multidisciplinary team who is engaged in engineering design activities. Some ideas of en...This paper outlines a concurrent engineering environment that supports interaction between members of a geographically dispersed multidisciplinary team who is engaged in engineering design activities. Some ideas of engineering design, especially conceptual design are reviewed. A deeper scientific analysis of intelligent design is discussed. A new problem solving strategy and methodologies to implement cooperative design are proposed. Finally, a conceptual model of a blackboard system for accomplishing conceptual design automation is presented. Its fundamental principles, system organization and key implementation techniques are investigated in detail.展开更多
文摘Computer aided design on the Internet/Intranet explores new frontiers in design environment. A new Web based CAD system is introduced. The users can install the CAD system on the server to build three dimensional models of products through a Web browser in any operation systems. No system installation and system maintenance are required. A new architecture and the database of system are discussed. The UML models of the system are presented. The proposed organization is implemented on the World Wide Web using Java and CORBA.
文摘To estimate the geometric characteristics, especially wet areas and section areas, of three dimensional numerical conceptual aircraft models, a method based on surface elements is proposed. On the premise that numerous surface elements are generated to represent each component surface, a component wet area of the surface is estimated by adding up the areas of such elements that are not covered by any other component surfaces. The elements are also used to get the section polygons of such composite surfaces as the whole aircraft at a given body station, then a section area is approximated with the sum of trapezoidal areas between such sides of polygons that are not covered by any other component and a reference axis. Practical application to a computer aided aircraft conceptual design system shows that the methed is applicable to different kinds of conceptual aircraft models and its precision is satisfying to the conceptual design.
文摘Simulations of photoresist etching,aerial image,exposure,and post-bake processes are integrated to obtain a photolithography process simulation for microelectromechanical system（MEMS） and integrated circuit（IC） fabrication based on three-dimensional （3D） cellular automata（CA）. The simulation results agree well with available experimental results. This indicates that the 3D dynamic CA model for the photoresist etching simulation and the 3D CA model for the post-bake simulation could be useful for the monolithic simulation of various lithography processes. This is determined to be useful for the device-sized fabrication process simulation of IC and MEMS.
文摘Feature based design has been regarded as a promising approach for CAD/CAM integration.This paper aims to establish a domain independent representation formalism for feature based design in three aspects: formal representation,design process model and design algorithm.The implementing scheme and formal description of feature taxonomy,feature operator,feature model validation and feature transformation are given in the paper.The feature based design process model suited for either sequencial or concurrent engineering is proposed and its application to product structural design and process plan design is presented. Some general design algorithms for developing feature based design system are also addressed.The proposed scheme provides a formal methodology elementary for feature based design system development and operation in a structural way.
文摘Design of internal combustion engine (ICE) components is one of the earliest and also the most active areas in which computer aided modeling techniques are applied. Computer aided modeling techniques could provide requisite information for follow up designing segments such as structural analysis, design of technological process and manufacturing etc, and thereby lead to the reduction of product design period and the quality and reliability improvement of ICE components. So the developing situations of ICE components' 2 D drafting, 3 D modeling of ICE, overall CAD of ICE as well as component design expert system etc. are surveyed, which are the typical applications of computer aided modeling techniques in ICE component design process, and some existent problems and tasks are pointed out so as to make some references for the further research work.
文摘A system architecture of solid-based NC simulation for milling machining is given, the function of which is composed of cutting simulation of different cutters, such as flat-end cutters, ball-end cutters, dome-end cutters, angle cutters and drill cutters, rapid pre-checking of interference, detection of collision, and visualization of over cut in the stock. A new method based on the design model is raised to detect the collision and pre-check the interference during NC milling machining. A special problem about the construction of a cutter′s swept volume, self-intersection is discussed. All the work on the construction, the subtraction and the display of solids is accomplished with the help of ACIS 3-D modeling.
文摘A new partitioning methodology is presented to accelerate 130nm and beyond large scale alternating phase shift mask(Alt PSM) design flow.This method deals with granularity self adaptively.Phase conflicts resolution approaches are described and strategies guaranteeing phase compatible during layout compaction are also discussed.An efficient CAD prototype for dark field Alt PSM based on these algorithms is implemented.The experimental results on several industry layouts show that the tool can successfully cope with the rapid growth of phase conflicts with good quality and satisfy lower resource consumption with different requirements of precision and speedup.
文摘This paper outlines a concurrent engineering environment that supports interaction between members of a geographically dispersed multidisciplinary team who is engaged in engineering design activities. Some ideas of engineering design, especially conceptual design are reviewed. A deeper scientific analysis of intelligent design is discussed. A new problem solving strategy and methodologies to implement cooperative design are proposed. Finally, a conceptual model of a blackboard system for accomplishing conceptual design automation is presented. Its fundamental principles, system organization and key implementation techniques are investigated in detail.
