It is well known that a SMPS （switched-mode power supply） is easy to produce strong EMI （electromagnetic interference） and fails in EMC （electromagnetic compatibility） test for its far field radiation exceeds th...It is well known that a SMPS （switched-mode power supply） is easy to produce strong EMI （electromagnetic interference） and fails in EMC （electromagnetic compatibility） test for its far field radiation exceeds the limits between 30-200 MHz. Based on asymmetry line antenna theory, a novel far field CM （common mode） radiation model, including an equivalent driving source, radiation structure and some key influence factors, is identified and built up for a small flyback power supply. Radiation characteristics of this model are predicted by using Ansoft HFSS software and the model effectiveness is verified by experiment. In the end, the radiation role of some key factors, such as the length of output cable, common mode impedance of AC grid, layout of cable and reflected ground, are studied using simulation in detail.展开更多
A method for system-level simulation between microbolometer designing and Read-Out Integrated Circuit(ROIC) was studied. Three-dimensional(3D) structure modeling of the microbolometer was built. Thermal capacity, ther...A method for system-level simulation between microbolometer designing and Read-Out Integrated Circuit(ROIC) was studied. Three-dimensional(3D) structure modeling of the microbolometer was built. Thermal capacity, thermal conductivity and resistance of the model were obtained from thermoelectric coupling Finite Element Method(FEM) based on the model. An electrical equipment circuit of microbolometer which contains these three parameters was established. By using Verilog-AMS language, the electrical equipment circuit was described as a reduced-order macro-model. Then, the reduced-order macromodel was compiled in cadence to form IP unit of microbolometer, which could be used and identified in cadence. Systemlevel simulation between microbolometer and ROIC was accomplished. Key performances of the device, including input and output characteristics, were obtained in simulation and verified by experimental results.展开更多
文摘It is well known that a SMPS （switched-mode power supply） is easy to produce strong EMI （electromagnetic interference） and fails in EMC （electromagnetic compatibility） test for its far field radiation exceeds the limits between 30-200 MHz. Based on asymmetry line antenna theory, a novel far field CM （common mode） radiation model, including an equivalent driving source, radiation structure and some key influence factors, is identified and built up for a small flyback power supply. Radiation characteristics of this model are predicted by using Ansoft HFSS software and the model effectiveness is verified by experiment. In the end, the radiation role of some key factors, such as the length of output cable, common mode impedance of AC grid, layout of cable and reflected ground, are studied using simulation in detail.
基金supported by the National Natural Science Foundation of China(Grant Nos.61235006 and 61421002)
文摘A method for system-level simulation between microbolometer designing and Read-Out Integrated Circuit(ROIC) was studied. Three-dimensional(3D) structure modeling of the microbolometer was built. Thermal capacity, thermal conductivity and resistance of the model were obtained from thermoelectric coupling Finite Element Method(FEM) based on the model. An electrical equipment circuit of microbolometer which contains these three parameters was established. By using Verilog-AMS language, the electrical equipment circuit was described as a reduced-order macro-model. Then, the reduced-order macromodel was compiled in cadence to form IP unit of microbolometer, which could be used and identified in cadence. Systemlevel simulation between microbolometer and ROIC was accomplished. Key performances of the device, including input and output characteristics, were obtained in simulation and verified by experimental results.
