Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of th...Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of the EBA are： energy 0.5 to 1.5 MeV; beam current： 0.3 to 25.0 mA; beam scanning： 60 to 120 cm; beam width： 25.4 mm and frequency： 100 Hz. Nowadays, this accelerator has been used for innumerable applications, such as： For sterilization of medical, pharmaceutical and biological products, treatment of industrial and domestic effluents and sludge, preservation and disinfestations of foods and agricultural products. Other important application are lignocellulosic material irradiation as a pre-treatment to produce ethanol bio-fuel, decontamination of pesticide packing, solid residues remediation, organic compounds removal from wastewater, treatment of effluent from petroleum production units, crosslinking of foams, wires and electric cables. Electron accelerator JOB 188 is, also, very important composite and nanocomposite materials and carbon fibers irradiation, irradiated grafting ion-exchange membranes for fuel cells application, natural polymers and multilayer packages irradiation and biodegradable blends production. The energy of the electron beam is calculated as a function of the current in the accelerator high-voltage divisor, taking into account the thickness and density of the material to be irradiated. This energy is calculated considering the electron through the entire material and the distance from the titanium foil window, so that the absorbed doses at the points of entrance and exit are equivalent on the material. The dose is directly proportional to the beam current and the exposure time of the material under the electron beam and inversely proportional to the scan width. The aim of this paper is to analyze the power system parameters of the EBA Dynamitron DC 1500/25/04, such as, voltage and RMS （Root-mean-square） current in the oscillator system, high voltage generator and waveform. For this purpose software developed in the Radiation Technology Center at IPEN/CNEN-SP to simulate the energy efficiency of this industrial accelerator. Finally, it is also targeted to compare theoretical dosimetry using parameters of energy and beam current with data from the accelerator power system. This knowledge and technology will be very useful and essential for the control system upgrade of EBA, mainly Dynamitron DC 1500/25/04 taking into consideration that radiation processing technology for industrial and environmental applications has been developed and used worldwide.展开更多
Studies on radiation level and radionuclide distribution in Yemen were studied. The samples were collected from eight locations： Ma＇rib, A1 Jawf, Sana＇a, Dhamar, Amran, Ibb, Al Bayda and Al Dalea. The purpose of th...Studies on radiation level and radionuclide distribution in Yemen were studied. The samples were collected from eight locations： Ma＇rib, A1 Jawf, Sana＇a, Dhamar, Amran, Ibb, Al Bayda and Al Dalea. The purpose of this study is to provide a baseline map of radioactivity background levels in the investigated area and this study will be used as reference information to assess any change in the radioactive background level due to geological processes. The highest values of 22~ and 2~l＇h concentrations （8797.2 and 24984.1 Bq.kg＂l, respectively） were observed at A1 Jawf, region, whereas the highest average value of 40K concentration was 1561.9 Bq.kg-1. The investigation of the geological maps of the area under study showed that the surface rock outcrops consist mainly of granites, diorite, granodiorite, gneisses, and schists. All these rock types arc known to be rich in radioactive materials, which are considered natural sources for gamma radiation. The low mdiological background characterizing some Yemeni rocks could be attributed to nature of these rocks which consist of lime stone （sands and gravels）. The absorbed dose rate in air was found to be in the range between 5.40 and 45.11 nGy.h-1 depending on the geological features, and radium equivalent activity concentration was found in the range between 29.57 and 71.85 Bq.kg-1. Also the representative extcmal hazard index values for the corresponding samples were also estinlated and given.展开更多
文摘Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of the EBA are： energy 0.5 to 1.5 MeV; beam current： 0.3 to 25.0 mA; beam scanning： 60 to 120 cm; beam width： 25.4 mm and frequency： 100 Hz. Nowadays, this accelerator has been used for innumerable applications, such as： For sterilization of medical, pharmaceutical and biological products, treatment of industrial and domestic effluents and sludge, preservation and disinfestations of foods and agricultural products. Other important application are lignocellulosic material irradiation as a pre-treatment to produce ethanol bio-fuel, decontamination of pesticide packing, solid residues remediation, organic compounds removal from wastewater, treatment of effluent from petroleum production units, crosslinking of foams, wires and electric cables. Electron accelerator JOB 188 is, also, very important composite and nanocomposite materials and carbon fibers irradiation, irradiated grafting ion-exchange membranes for fuel cells application, natural polymers and multilayer packages irradiation and biodegradable blends production. The energy of the electron beam is calculated as a function of the current in the accelerator high-voltage divisor, taking into account the thickness and density of the material to be irradiated. This energy is calculated considering the electron through the entire material and the distance from the titanium foil window, so that the absorbed doses at the points of entrance and exit are equivalent on the material. The dose is directly proportional to the beam current and the exposure time of the material under the electron beam and inversely proportional to the scan width. The aim of this paper is to analyze the power system parameters of the EBA Dynamitron DC 1500/25/04, such as, voltage and RMS （Root-mean-square） current in the oscillator system, high voltage generator and waveform. For this purpose software developed in the Radiation Technology Center at IPEN/CNEN-SP to simulate the energy efficiency of this industrial accelerator. Finally, it is also targeted to compare theoretical dosimetry using parameters of energy and beam current with data from the accelerator power system. This knowledge and technology will be very useful and essential for the control system upgrade of EBA, mainly Dynamitron DC 1500/25/04 taking into consideration that radiation processing technology for industrial and environmental applications has been developed and used worldwide.
文摘Studies on radiation level and radionuclide distribution in Yemen were studied. The samples were collected from eight locations： Ma＇rib, A1 Jawf, Sana＇a, Dhamar, Amran, Ibb, Al Bayda and Al Dalea. The purpose of this study is to provide a baseline map of radioactivity background levels in the investigated area and this study will be used as reference information to assess any change in the radioactive background level due to geological processes. The highest values of 22~ and 2~l＇h concentrations （8797.2 and 24984.1 Bq.kg＂l, respectively） were observed at A1 Jawf, region, whereas the highest average value of 40K concentration was 1561.9 Bq.kg-1. The investigation of the geological maps of the area under study showed that the surface rock outcrops consist mainly of granites, diorite, granodiorite, gneisses, and schists. All these rock types arc known to be rich in radioactive materials, which are considered natural sources for gamma radiation. The low mdiological background characterizing some Yemeni rocks could be attributed to nature of these rocks which consist of lime stone （sands and gravels）. The absorbed dose rate in air was found to be in the range between 5.40 and 45.11 nGy.h-1 depending on the geological features, and radium equivalent activity concentration was found in the range between 29.57 and 71.85 Bq.kg-1. Also the representative extcmal hazard index values for the corresponding samples were also estinlated and given.
