期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
基于扩散近似法和双通量法耦合的多孔介质内燃烧辐射换热计算方法
1
作者 李德波 宋正昶 《计算物理》 CSCD 北大核心 2013年第2期203-208,共6页
将Rosseland辐射模型和双通量法结合,对瓦斯气体在泡沫陶瓷中预混燃烧辐射换热计算方法进行研究.数值模拟的结果与试验结果吻合比较好,证明提出的辐射换热计算方法是有效的.
关键词 辐射换热计算方法 Rosseland扩散近似法 双通量法 瓦斯预混燃烧 多孔介质
下载PDF
采暖房间的辐射换热计算分析 被引量:2
2
作者 傅卫红 由世俊 《天津职业院校联合学报》 2006年第5期9-11,33,共4页
采暖的最终目的是利用物体间的换热规律,为室内人员营造一个舒适的热环境。而热环境的建立主要取决于房间内的换热状况。要对辐射采暖房间的换热计算进行探讨,建立辐射采暖房间的换热模型,列出反应房间换热状况的方程组;基于对建筑房间... 采暖的最终目的是利用物体间的换热规律,为室内人员营造一个舒适的热环境。而热环境的建立主要取决于房间内的换热状况。要对辐射采暖房间的换热计算进行探讨,建立辐射采暖房间的换热模型,列出反应房间换热状况的方程组;基于对建筑房间内换热特点的分析,对模型进行两种不同程度的简化。结合具体实例将各种换热模型的计算结果进行比较,得出简化的能综合反映房间换热状况的方程,计算求得的房间内的换热状况,大大简化辐射采暖房间的换热计算。 展开更多
关键词 辐射采暖 辐射换热计算 热舒适 角系数
下载PDF
含端壁涡轮导叶红外测温的误差影响机理研究 被引量:1
3
作者 翟颖妮 梁智杰 +1 位作者 孟宪龙 刘存良 《红外与激光工程》 EI CSCD 北大核心 2024年第1期101-113,共13页
由于涡轮叶片所处的工作环境复杂,受到壁面及燃气辐射干扰,导致测温十分困难。为进一步分析涡轮叶片表面在端壁影响下的温度分布情况,采用数值模拟结合自定义编程的方式进行了含端壁涡轮导叶的温度误差验证计算。利用自定义编程对经典... 由于涡轮叶片所处的工作环境复杂,受到壁面及燃气辐射干扰,导致测温十分困难。为进一步分析涡轮叶片表面在端壁影响下的温度分布情况,采用数值模拟结合自定义编程的方式进行了含端壁涡轮导叶的温度误差验证计算。利用自定义编程对经典同心球模型进行了角系数,有效辐射等可靠性验证计算,验证方法可靠。基于该方法进行了端壁与涡轮导叶各网格单元的角系数,叶片表面间的辐射换热计算,输出涡轮导叶的表面辐射特性分布,运用玻耳兹曼定律反推导出该工况涡轮导叶所受到的辐射能流分布情况;计算分析了不同误差影响机理下,含端壁的涡轮导叶温度误差分布情况,探明了热辐射环境下对叶片表面辐射特性的影响。结果表明:当进口黑体辐射温度在1 400~1 800 K之间,进口辐射强度是对叶片换热影响最大的因素;利用有效辐射和所计算的误差分布可知,进口辐射温度影响区域主要是叶片前缘区域,最大计算误差不超过2.82%;通过有效辐射及误差分布可见,出口黑体辐射温度的变化对于涡轮导叶的影响较小,受温度影响区域也主要为叶片前缘区域,最大计算误差不超过2.35%;叶片表面发射率与温度成正相关,当叶片表面发射率增大时,叶片表面温度随之均匀升高,在真实工况下,叶片材料物性的改变较小,在发动机设计中可以近似忽略由于叶片温度变化导致物性参数改变带来的影响。 展开更多
关键词 涡轮叶片 数值模拟 辐射换热计算 辐射特性 反射辐射 角系数
下载PDF
The Influence of Friction Factor on the Convective and Radiative Heat Transfer in Inclined Cylindrical Annulus
4
《Journal of Energy and Power Engineering》 2013年第11期2027-2036,共10页
The effect of friction factor on the unsteady state mixed convective-radiative heat transfer in an inclined cylindrical annulus is investigated from continuity, momentum and energy equations. The outer cylinder is kep... The effect of friction factor on the unsteady state mixed convective-radiative heat transfer in an inclined cylindrical annulus is investigated from continuity, momentum and energy equations. The outer cylinder is kept at a constant temperature while the inner cylinder is heated with constant heat flux. The governing equations are normalized and solved using the vorticity-stream function and the BFC (body fitted coordinates) methods. The two heat transfer mechanisms of convection and radiation are treated independently and simultaneously. A computer program (Fortran 90) was built to calculate Nusselt number (Nu) and friction factorffor unsteady state condition for fluid Prandtl number fixed at (Pr = 0.7) (for air as working fluid) with radius ratio (/~ = 2.6), Rayleigh number (0 〈 Ra 〈 103), Reynolds number (50 〈 Re 〈 2,000), conduction-radiation parameter (0 〈 N 〈 10), optical thickness (0 〈 l" 〈 10) and different annulus inclination with horizontal plane (0~ _〈 d 〈 90~) for concentric cylindrical annulus. For the range of parameters considered, results show that radiation enhance heat transfer. It is also indicated in the results that as 3 increasefwill be decrease and also when Re increasefwill be decrease for any value of Ra causing increase in heat transfer. The maximum value off can be recognized at ~ = 90~ and the minimum value at 6 = 0~ for low Re. There is an optimum value of annulus inclination that gives maximum value of Nu, this maximum value appears at 90~ of annulus inclination comparison of the result with the previous work shows a good agreement. 展开更多
关键词 Laminar flow mixed convection RADIATION inclined annulus friction factor.
下载PDF
Research on Marine Boiler's Pressurized Combustion and Heat Transfer 被引量:3
5
作者 PingjianMING RenqiuJIANG YanjunLI BaozhiSUN 《Journal of Thermal Science》 SCIE EI CAS CSCD 2005年第1期76-80,共5页
The effect of pressure on combustion and heat transfer is analyzed. The research is based on the basic combustion and heat transfer theorem. A correction for the heat calculation method for pressurized furnace is made... The effect of pressure on combustion and heat transfer is analyzed. The research is based on the basic combustion and heat transfer theorem. A correction for the heat calculation method for pressurized furnace is made on the basis of the normal pressure case. The correction takes the effect of pressurizing into account. The results show that the correction is reasonable and the method is applicable to combustion and heat transfer of the marine supercharged boiler. 展开更多
关键词 marine boiler pressurized combustion radiant heat transfer heat calculation method.
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部