An input-output signal selection based on Phillips-Heffron model of a parallel high voltage alternative current/high voltage direct current(HVAC/HVDC) power system is presented to study power system stability. It is w...An input-output signal selection based on Phillips-Heffron model of a parallel high voltage alternative current/high voltage direct current(HVAC/HVDC) power system is presented to study power system stability. It is well known that appropriate coupling of inputs-outputs signals in the multivariable HVDC-HVAC system can improve the performance of designed supplemetary controller. In this work, different analysis techniques are used to measure controllability and observability of electromechanical oscillation mode. Also inputs–outputs interactions are considered and suggestions are drawn to select the best signal pair through the system inputs-outputs. In addition, a supplementary online adaptive controller for nonlinear HVDC to damp low frequency oscillations in a weakly connected system is proposed. The results obtained using MATLAB software show that the best output-input for damping controller design is rotor speed deviation as out put and phase angle of rectifier as in put. Also response of system equipped with adaptive damping controller based on HVDC system has appropriate performance when it is faced with faults and disturbance.展开更多
This paper intreduced a high-precision high-voltage elec- trostatic generator which utilized STM32F103 as the main coutroller. The hardware and software design of the system were detailed. The full use of ample on-chi...This paper intreduced a high-precision high-voltage elec- trostatic generator which utilized STM32F103 as the main coutroller. The hardware and software design of the system were detailed. The full use of ample on-chip resources of STM32F103, such as ADC and the PWM output of timer, contributed to the small size and low cost of the system. The 16-bit PWM signals, generated by the timer on chip, served to adjust the our-put voltage accurately. The tot~ screen was responsible for the setting and display of output voltage, and the friendly humawcomptaer interaction was built. Experimental results indicated that this high-voltage static generator was of high precision and great practicability for application.展开更多
To reduce output voltage noise and improve dynamic response performance,this study designed a buck converter on the basis of secondary filters and adaptive voltage positioning(AVP).A hybrid control method was proposed...To reduce output voltage noise and improve dynamic response performance,this study designed a buck converter on the basis of secondary filters and adaptive voltage positioning(AVP).A hybrid control method was proposed for the compensation of the secondary filter.The introduction of a high-frequency feedback path,in addition to the traditional feedback path,effectively improved the influence of the secondary filter on the loop stability and direct current regulation performance.A small-signal model of the buck converter based on the proposed control method was derived,and the stability and selection of control parameters were analyzed.AVP is realized using an easy-to-implement and low-cost control method that was proposed to improve dynamic response performance by changing the low-frequency gain of the control loop and load regulation of the output voltage.The experimental results of the buck converter showed that the proposed method effectively reduced the output voltage noise by 50%and improved the dynamic response capability to meet the target requirements of mainstream electronic systems.展开更多
A Monolithic integrated phase locked-loop （PLL） with a low phase noise is proposed in this paper. Several techniques are utilized to improve the performance of the PLL which works at the milli- meter-wave band. The ...A Monolithic integrated phase locked-loop （PLL） with a low phase noise is proposed in this paper. Several techniques are utilized to improve the performance of the PLL which works at the milli- meter-wave band. The on-chip high-Q eoplanar waveguides （CPWs） are utilized in the resonant tank and the differential current amplifier with a resonator is used to realize the VCO. In the output buffer circuit, several stages of cascaded source-followers connect and differential amplifiers are adopted to improve the driving capability of the PLL＇ s output signals. An improved analog multiplier topology is also used in the PD circuit to improve the gain of the PD. The proposed PLL is realized with a 0.2p, m GaAs pseudomorphie high electron mobility transistor （PHEMT） process. At 10 kHz offset from the center frequency, the measured output phase noise of the PLL output is only -88.83dBc/Hz. The circuit exhibits a low root mean sauare （RMS） litter of 1.68Ds.展开更多
文摘An input-output signal selection based on Phillips-Heffron model of a parallel high voltage alternative current/high voltage direct current(HVAC/HVDC) power system is presented to study power system stability. It is well known that appropriate coupling of inputs-outputs signals in the multivariable HVDC-HVAC system can improve the performance of designed supplemetary controller. In this work, different analysis techniques are used to measure controllability and observability of electromechanical oscillation mode. Also inputs–outputs interactions are considered and suggestions are drawn to select the best signal pair through the system inputs-outputs. In addition, a supplementary online adaptive controller for nonlinear HVDC to damp low frequency oscillations in a weakly connected system is proposed. The results obtained using MATLAB software show that the best output-input for damping controller design is rotor speed deviation as out put and phase angle of rectifier as in put. Also response of system equipped with adaptive damping controller based on HVDC system has appropriate performance when it is faced with faults and disturbance.
文摘This paper intreduced a high-precision high-voltage elec- trostatic generator which utilized STM32F103 as the main coutroller. The hardware and software design of the system were detailed. The full use of ample on-chip resources of STM32F103, such as ADC and the PWM output of timer, contributed to the small size and low cost of the system. The 16-bit PWM signals, generated by the timer on chip, served to adjust the our-put voltage accurately. The tot~ screen was responsible for the setting and display of output voltage, and the friendly humawcomptaer interaction was built. Experimental results indicated that this high-voltage static generator was of high precision and great practicability for application.
文摘To reduce output voltage noise and improve dynamic response performance,this study designed a buck converter on the basis of secondary filters and adaptive voltage positioning(AVP).A hybrid control method was proposed for the compensation of the secondary filter.The introduction of a high-frequency feedback path,in addition to the traditional feedback path,effectively improved the influence of the secondary filter on the loop stability and direct current regulation performance.A small-signal model of the buck converter based on the proposed control method was derived,and the stability and selection of control parameters were analyzed.AVP is realized using an easy-to-implement and low-cost control method that was proposed to improve dynamic response performance by changing the low-frequency gain of the control loop and load regulation of the output voltage.The experimental results of the buck converter showed that the proposed method effectively reduced the output voltage noise by 50%and improved the dynamic response capability to meet the target requirements of mainstream electronic systems.
基金Supported by the National Natural Science Foundation of China （No. 61106024, 60901012, 60976029） , the National High Technology Research and Development Program of China （No. 2011AA010301 ）, and the Science and Technology Program of Southeast University （No. K J2010402 ）.
文摘A Monolithic integrated phase locked-loop （PLL） with a low phase noise is proposed in this paper. Several techniques are utilized to improve the performance of the PLL which works at the milli- meter-wave band. The on-chip high-Q eoplanar waveguides （CPWs） are utilized in the resonant tank and the differential current amplifier with a resonator is used to realize the VCO. In the output buffer circuit, several stages of cascaded source-followers connect and differential amplifiers are adopted to improve the driving capability of the PLL＇ s output signals. An improved analog multiplier topology is also used in the PD circuit to improve the gain of the PD. The proposed PLL is realized with a 0.2p, m GaAs pseudomorphie high electron mobility transistor （PHEMT） process. At 10 kHz offset from the center frequency, the measured output phase noise of the PLL output is only -88.83dBc/Hz. The circuit exhibits a low root mean sauare （RMS） litter of 1.68Ds.
