期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
基于局部输沙模式的港口航道整治线宽度确定
1
作者 龙括 《珠江水运》 2024年第7期66-68,共3页
为探求港口航道整治线宽度确定的可行思路,进行现状整治线宽度成果的分析研究,并结合港口航道浅滩段冲淤特性进行了局部输沙模式计算公式的构建,进而对平衡系数展开推求。结果表明,对于顺直过渡航道浅滩段,应以束窄河宽为主要整治思路;... 为探求港口航道整治线宽度确定的可行思路,进行现状整治线宽度成果的分析研究,并结合港口航道浅滩段冲淤特性进行了局部输沙模式计算公式的构建,进而对平衡系数展开推求。结果表明,对于顺直过渡航道浅滩段,应以束窄河宽为主要整治思路;而对于分叉浅滩及弯曲浅滩段,必须注重分流分沙比的调整;所构建起的航道整治线宽度计算公式对于冲淤特性复杂的低水整治河段具有普遍适用性。 展开更多
关键词 局部输沙模式 港口航道 整治线 宽度
下载PDF
瓯江河口输沙模式与应用研究 被引量:4
2
作者 祝永康 孙志林 《地理研究》 CSSCI CSCD 北大核心 1993年第2期9-18,共10页
本文从河口塑造与输沙关系、流域泄沙与输移模式,以及口外来沙与潮流输移特征等三方面,探讨河口区的泥沙运移规律和补给来源。并在此基础上,提出粗细不同粒级的造床泥沙按不同方式治理的设想。
关键词 河口 输沙模式 潮流 瓯江
下载PDF
一维河流数值模拟算法的概述 被引量:14
3
作者 杨国录 吴卫民 《泥沙研究》 CSCD 北大核心 1995年第4期34-41,共8页
本文仅对一维河流数值模拟算法的近期发展作一简短报道,内容有当今数值模拟对算法提出的具体要求,动床一维非恒定流算法,泥沙模型中的饱和和非饱和输沙模式嵌套算法,一、二维泥沙模型嵌套算法等,并指出交叉边缘学科的渗透和多学科... 本文仅对一维河流数值模拟算法的近期发展作一简短报道,内容有当今数值模拟对算法提出的具体要求,动床一维非恒定流算法,泥沙模型中的饱和和非饱和输沙模式嵌套算法,一、二维泥沙模型嵌套算法等,并指出交叉边缘学科的渗透和多学科的结合以及应用是今后河道数学模型研究和发展的重要方向. 展开更多
关键词 泥沙输移 河床演变 一维泥沙模型 输沙模式 数值模拟
下载PDF
明渠砂质床面桩柱冲刷与导流防护试验研究 被引量:6
4
作者 黄雄合 许栋 +2 位作者 及春宁 白玉川 刘洪昌 《水利水电技术》 CSCD 北大核心 2017年第11期128-133,149,共7页
为了研究明渠砂质床面桩柱冲刷的水沙动力机理,分析极限平衡冲刷深度和范围随水流雷诺数的变化规律以及抗冲刷导流防护措施的效果,利用动床模型水槽试验,再现了桩柱周围局部床面从平整发展到冲刷坑的发育过程,测量了各工况下冲刷坑的形... 为了研究明渠砂质床面桩柱冲刷的水沙动力机理,分析极限平衡冲刷深度和范围随水流雷诺数的变化规律以及抗冲刷导流防护措施的效果,利用动床模型水槽试验,再现了桩柱周围局部床面从平整发展到冲刷坑的发育过程,测量了各工况下冲刷坑的形态参数,并利用PIV技术观测粗颗粒泥沙局部悬扬运动。结果表明:桩柱冲刷范围(相对于桩径D)随雷诺数ReD增大呈减小趋势。当雷诺数ReD在4 500~18 000之间变化时,冲刷深度变化范围为2.4D^1.3D,冲刷坑半径变化范围为4.5D^2.5D。砂质床面桩柱冲刷除存在显著的推移质运动外,还存在局部粗泥沙颗粒悬扬,且悬扬输沙的范围和强度随冲刷坑发展而强烈变化。在桩柱后方设置导流板能够有效抑制柱后卡门涡街的生成,桩后冲刷深度最大减小幅度为27.7%,但对柱前冲刷深度的影响不大。 展开更多
关键词 桩柱 局部冲刷 水槽试验 推移质 输沙模式 泥沙悬扬 卡门涡街 泥沙冲淤平衡
下载PDF
Numerical Simulation of Typhoon Muifa(2011) Using a Coupled Ocean-Atmosphere-Wave-Sediment Transport(COAWST) Modeling System 被引量:12
5
作者 LIU Na LING Tiejun +3 位作者 WANG Hui ZHANG Yunfei GAO Zhiyi WANG Yi 《Journal of Ocean University of China》 SCIE CAS 2015年第2期199-209,共11页
The newly developed Coupled Ocean-Atmosphere-Wave-Sediment Transport(COAWST) Modeling System is applied to investigate typhoon-ocean interactions in this study. The COAWST modeling system represents the state-of-the-a... The newly developed Coupled Ocean-Atmosphere-Wave-Sediment Transport(COAWST) Modeling System is applied to investigate typhoon-ocean interactions in this study. The COAWST modeling system represents the state-of-the-art numerical simulation technique comprising several coupled models to study coastal and environmental processes. The modeling system is applied to simulate Typhoon Muifa(2011), which strengthened from a tropical storm to a super typhoon in the Northwestern Pacific, to explore the heat fluxes exchanged among the processes simulated using the atmosphere model WRF, ocean model ROMS and wave model SWAN. These three models adopted the same horizontal grid. Three numerical experiments with different coupling configurations are performed in order to investigate the impact of typhoon-ocean interaction on the intensity and ocean response to typhoon. The simulated typhoon tracks and intensities agree with observations. Comparisons of the simulated variables with available atmospheric and oceanic observations show the good performance of using the coupled modeling system for simulating the ocean and atmosphere processes during a typhoon event. The fully coupled simulation that includes a ocean model identifies a decreased SST as a result of the typhoon-forced entrainment. Typhoon intensity and wind speed are reduced due to the decrease of the sea surface temperature when using a coupled ocean model. The experiments with ocean coupled to atmosphere also results in decreased sea surface heat flux and air temperature. The heat flux decreases by about 29% compared to the WRF only case. The reduction of the energy induced by SST decreases, resulting in weakening of the typhoon. Coupling of the waves to the atmosphere and ocean model induces a slight increase of SST in the typhoon center area with the ocean-atmosphere interaction increased as a result of wave feedback to atmosphere. 展开更多
关键词 COAWST modeling system typhoon Muifa WRF ROMS SWAN
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部